TSFS 2014:136

Transportstyrelsens föreskrifter och allmänna råd om transport till sjöss av skadliga flytande kemikalier i bulk (IBC-koden), TSFS 2014:136

Titel: Transportstyrelsens föreskrifter och allmänna råd (TSFS 2014:136) om transport till sjöss av skadliga flytande kemikalier i bulk (IBC-koden), TSFS 2014:136
Utgivare: Transportstyrelsen
Beslutad: 2014-12-01
Ikraftträdande: 2015-01-01
Källa: www.transportstyrelsen.se

Bemyndigande

1 §¶

Som Transportstyrelsens föreskrifter ska gälla den internationella koden för konstruktion och utrustning av fartyg som till sjöss transporterar skadliga flytande kemikalier i bulk (IBC-koden), antagen av den internationella sjöfartsorganisationen (IMO) den 17 juni 1983 genom resolution 1 2 MSC.4(48) , senast ändrad genom IMO-resolutionerna MSC.340(91) och 3 MEPC.225(64) . 4 IBC-kodens engelska, franska och spanska text ska ha samma giltighet . IBC-kodens engelska text i dess gällande lydelse efter ändringar antagna genom resolutionerna MSC.176(79) och MEPC.119(52); MSC.219(82) och MEPC.166(56), samt MSC.340(91) och MEPC.225(64) finns i bilaga till dessa föreskrifter.

Tillämpningsområde

2 §¶

IBC-kodens krav ska uppfyllas vid transport av skadliga flytande kemikalier i bulk på kemikalietankfartyg inom Sveriges sjöterritorium och svenska kemikalietankfartyg utanför sjöterritoriet.

1 MSC.4(48), Adoption of the International Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk (IBC Code). 2 MSC.340(91), Adoption of Amendments to the International Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk (IBC Code). 3 Resolution MEPC.225(64), 2012 Amendments to the International Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk (IBC Code). 4 Texterna på franska och spanska finns tillgängliga hos IMO.

3 §¶

Kemikalietankfartyg som undergår reparation, ändringar, modifieringar och utrustas i samband därmed ska fortsätta att uppfylla åtminstone de krav som tidigare var tillämpliga för fartyget. Fartyg som konverteras till kemikalietankfartyg ska uppfylla de krav som gäller för ett kemikalietankfartyg med byggnadsdatum det datum då konverteringen påbörjades.

Ömsesidighetsklausul

4 §¶

Tekniska krav i dessa föreskrifter gäller inte för ett fartyg eller dess utrustning om fartyget eller utrustningen – har lagligen tillverkats eller satts på marknaden i en annan medlemsstat inom EU eller i Turkiet, eller – har lagligen tillverkats i ett EFTA-land som har undertecknat EESavtalet. Om fartyg eller utrustningar enligt första stycket inte uppnår en säkerhetsnivå som är likvärdig med den som garanteras genom dessa föreskrifter, ska de tekniska kraven i dessa föreskrifter gälla.

Undantag

5 §¶

Transportstyrelsen kan, om det finns särskilda skäl, medge undantag från dessa föreskrifter om det inte strider mot internationella överenskommelser eller gemenskapsrättslig lagstiftning.

Allmänna råd till avsnitt 3.2.1 i IBC-koden

Allmänna råd

Förrådsrum för färg, oavsett användningsområde, bör inte vara placerade över lastutrymmen .

Ikraftträdande och övergångsbestämmelser

1. Denna författning träder i kraft den 1 januari 2015. 2. Om det i en författning som har beslutats av Sjöfartsverket hänvisas till Sjöfartsverkets föreskrifter (SJÖFS 2006:35) om transport till sjöss av 7 skadliga flytande kemikalier i bulk (IBC-koden) , ska denna hänvisning i stället avse dessa föreskrifter. 3. Sjöfartsverkets och Transportstyrelsens beslut som gäller då denna författning träder i kraft gäller även efter ikraftträdandet av denna författning. Sådana beslut ska anses ha meddelats av Transportstyrelsen och gäller

5 Motsvarar SOLAS kapitel VII regel 9.2 och 9.3. MSC.1/Circ. 1241, Unified Interpretation of the International Bulk Chemicals (IBC) Code.

till dess Transportstyrelsen meddelar ett nytt beslut eller giltighetstiden för beslutet går ut. På Transportstyrelsens vägnar STAFFAN WIDLERT Tatjana Olson (Sjö- och luftfartsavdelningen)

Utgivare: Kristina Nilsson, Transportstyrelsen, Norrköping ISSN 2000-1975 3

Bilaga

General

1.1 Application

1.1.1 The Code applies to ships regardless of size, including those of less than 500 gross tonnage, engaged in the carriage of bulk cargoes of dangerous chemicals or noxious liquid substances (NLS), other than petroleum or similar flammable products as follows:

.1 products having significant fire hazards in excess of those of petroleum products and similar flammable products;

.2 products having significant hazards in addition to or other than flammability.

1.1.2 Products that have been reviewed and determined not to present safety and pollution hazards to such an extent as to warrant the application of the Code are found in chapter 18.

1.1.3 Liquids covered by the Code are those having a vapour pressure not exceeding 0.28 MPa absolute at a temperature of 37.8°C.

1.1.4 For the purpose of the 1974 SOLAS Convention, the Code applies to ships which are engaged in the carriage of products included in chapter 17 on the basis of their safety characteristics and identified as such by an entry of S or S/P in column d.

1.1.5 For the purposes of MARPOL 73/78, the Code applies only to NLS tankers, as defined in regulation 1.16.2 of Annex II thereof, which are engaged in the carriage of Noxious Liquid Substances identified as such by an entry of X, Y or Z in column c of chapter 17.

1.1.6 For a product proposed for carriage in bulk, but not listed in chapters 17 or 18, the Administration and port Administrations involved in such carriage shall prescribe the preliminary suitable conditions for the carriage, having regard to the criteria for hazard evaluation of bulk chemicals. For the evaluation of the pollution hazard of such a product and assignment of its pollution category, the procedure specified in regulation 6.3 of Annex II of MARPOL 73/78 must be followed. The Organization shall be notified of the conditions for consideration for inclusion of the product in the Code.

1.1.7 Unless expressly provided otherwise, the Code applies to ships, the keels of which are laid or which are at the stage where:

.1 construction identifiable with the ship begins; and

.2 assembly has commenced comprising at least 50 tonnes or 1% of the estimated mass of all structural material, whichever is less;

on or after 1 July 1986.

1.1.8 A ship, irrespective of the date of construction, which is converted to a chemical tanker on or after 1 July 1986 shall be treated as a chemical tanker constructed on the date on which such conversion commences. This conversion provision does not apply to the modification of a ship referred to in regulation 1.14 of Annex II of MARPOL 73/78.

Bilaga

1.1.9 Where reference is made in the Code to a paragraph, all the provisions of the subparagraphs of that designation shall apply.

1.2 Hazards

Hazards of products covered by the Code include: 1.2.1 Fire hazard, defined by flashpoint, explosive/flammability limits/range and autoignition temperature of the chemical. 1.2.2 Health hazard, defined by: .1 corrosive effects on the skin in the liquid state; or .2 acute toxic effect, taking into account values of: LD50 (oral): a dose, which is lethal to 50% of the test subjects when administered orally; LD50 (dermal): a dose, which is lethal to 50% of the test subjects when administered to the skin; LC50 (inhalation): the concentration which is lethal by inhalation to 50% of the test subjects; or .3 Other health effects such as carcinogenicity and sensitization. 1.2.3 Reactivity hazard, defined by reactivity: .1 with water; .2 with air; .3 with other products; or .4 of the product itself (e.g. polymerization). 1.2.4 Marine pollution hazard, as defined by: .1 bioaccumulation; .2 lack of ready biodegradibility; .3 acute toxicity to aquatic organisms; .4 chronic toxicity to aquatic organisms; .5 long term human health effects; and .6 physical properties resulting in the product floating or sinking and so adversely affecting marine life. 6

Bilaga

1.3 Definitions

The following definitions apply unless expressly provided otherwise. (Additional definitions are given in individual chapters).

1.3.1 Accommodation spaces are those spaces used for public spaces, corridors, lavatories, cabins, offices, hospitals, cinemas, games and hobbies rooms, barber shops, pantries containing no cooking appliances and similar spaces. Public spaces are those portions of the accommodation spaces which are used for halls, dining rooms, lounges and similar permanently enclosed spaces.

1.3.2 Administration means the Government of the State whose flag the ship is entitled to fly. For Administration (Port) see Port Administration.

1.3.3 Anniversary date means the day and the month of each year, which will correspond to the date of expiry of the International Certificate of Fitness for the Carriage of Dangerous Chemicals in Bulk.

1.3.4 Boiling point is the temperature at which a product exhibits a vapour pressure equal to the atmospheric pressure.

1.3.5 Breadth (B) means the maximum breadth of the ship, measured amidships to the moulded line of the frame in a ship with a metal shell and to the outer surface of the hull in a ship with a shell of any other material. The breadth (B) shall be measured in metres.

1.3.6 Cargo area is that part of the ship that contains cargo tanks, slop tanks, cargo pump-rooms including pump-rooms, cofferdams, ballast or void spaces adjacent to cargo tanks or slop tanks and also deck areas throughout the entire length and breadth of the part of the ship over the above-mentioned spaces. Where independent tanks are installed in hold spaces, cofferdams, ballast or void spaces at the after end of the aftermost hold space or at the forward end of the forward-most hold space are excluded from the cargo area.

1.3.7 Cargo pump-room is a space containing pumps and their accessories for the handling of the products covered by the Code.

1.3.8 Cargo service spaces are spaces within the cargo area used for workshops, lockers and 2 store-rooms of more than 2 m in area, used for cargo-handling equipment.

1.3.9 Cargo tank is the envelope designed to contain the cargo.

1.3.10 Chemical tanker is a cargo ship constructed or adapted and used for the carriage in bulk of any liquid product listed in chapter 17.

1.3.11 Cofferdam is the isolating space between two adjacent steel bulkheads or decks. This space may be a void space or a ballast space.

1.3.12 Control stations are those spaces in which ship's radio or main navigating equipment or the emergency source of power is located or where the fire-recording or fire-control equipment is centralized. This does not include special fire-control equipment which can be most practically located in the cargo area.

Bilaga

1.3.13 Dangerous chemicals means any liquid chemicals designated as presenting a safety hazard, based on the safety criteria for assigning products to chapter 17.

1.3.14 Density is the ratio of the mass to the volume of a product, expressed in terms of kilograms per cubic metre. This applies to liquids, gases and vapours.

1.3.15 Explosive/flammability limits/range are the conditions defining the state of fuel-oxidant mixture at which application of an adequately strong external ignition source is only just capable of producing flammability in a given test apparatus.

1.3.16 Flashpoint is the temperature in degrees Celsius at which a product will give off enough flammable vapour to be ignited. Values given in the Code are those for a “closed-cup test” determined by an approved flashpoint apparatus.

1.3.17 Hold space is the space enclosed by the ship's structure in which an independent cargo tank is situated.

1.3.18 Independent means that a piping or venting system, for example, is in no way connected to another system and that there are no provisions available for the potential connection to other systems.

1.3.19 Length (L) means 96% of the total length on a waterline at 85% of the least moulded depth measured from the top of the keel, or the length from the foreside of the stem to the axis of the rudder stock on that waterline, if that be greater. In ships designed with a rake of keel, the waterline on which this length is measured shall be parallel to the designed waterline. The length (L) shall be measured in metres.

1.3.20 Machinery spaces of category A are those spaces and trunks to such spaces which contain:

.1 internal-combustion machinery used for main propulsion; or

.2 internal-combustion machinery used for purposes other than main propulsion where such machinery has in the aggregate a total power output of not less than 375 kW; or

.3 any oil-fired boiler or oil fuel unit or any oil fired equipment other than boilers, such as inert gas generators, incinerators etc.

1.3.21 Machinery spaces are all machinery spaces of category A and all other spaces containing propelling machinery, boilers, oil fuel units, steam and internal-combustion engines, generators and major electrical machinery, oil filling station, refrigerating, stabilizing, ventilation and airconditioning machinery, and similar spaces, and trunks to such spaces.

1.3.22 MARPOL means the International Convention for the Prevention of Pollution from Ships, 1973, as modified by the Protocol of 1978 relating thereto, as amended.

1.3.23 Noxious Liquid Substance means any substance indicated in the Pollution Category column of chapters 17 or 18 of the International Bulk Chemical Code, or the current MEPC.2/Circular or provisionally assessed under the provisions of regulation 6.3 of MARPOL Annex II as falling into categories X, Y or Z.

Bilaga

1.3.24 Oil fuel unit is the equipment used for the preparation of oil fuel for delivery to an oil-fired boiler, or equipment used for the preparation for delivery of heated oil to an internal-combustion engine, and includes any oil pressure pumps, filters and heaters dealing with oil at a gauge pressure of more than 0.18 MPa.

1.3.25 Organization is the International Maritime Organization (IMO).

1.3.26 Permeability of a space means the ratio of the volume within that space which is assumed to be occupied by water to the total volume of that space.

1.3.27 Port administration means the appropriate authority of the country in the port of which the ship is loading or unloading.

1.3.28 Products is the collective term used to cover both Noxious Liquid Substances and Dangerous Chemicals.

1.3.29 Pump-room is a space, located in the cargo area, containing pumps and their accessories for the handling of ballast and oil fuel.

1.3.30 Recognized standards are applicable international or national standards acceptable to the Administration or standards laid down and maintained by an organization which complies with the standards adopted by the Organization and which is recognized by the Administration.

1.3.31 Reference temperature is the temperature at which the vapour pressure of the cargo corresponds to the set pressure of the pressure-relief valve.

1.3.32 Separate means that a cargo piping system or cargo vent system, for example, is not connected to another cargo piping or cargo vent system.

1.3.33 Service spaces are those spaces used for galleys, pantries containing cooking appliances, lockers, mail and specie rooms, store-rooms, workshops other than those forming part of the machinery spaces and similar spaces and trunks to such spaces.

1.3.34 SOLAS means the International Convention for the Safety of Life at Sea, 1974, as amended.

1.3.35 Vapour pressure is the equilibrium pressure of the saturated vapour above a liquid expressed in Pascals (Pa) at a specified temperature.

1.3.36 Void space is an enclosed space in the cargo area external to a cargo tank, other than a hold space, ballast space, oil fuel tank, cargo pump-room, pump-room, or any space in normal use by personnel.

1.4 Equivalents

1.4.1 Where the Code requires that a particular fitting, material, appliance, apparatus, item of equipment or type thereof shall be fitted or carried in a ship, or that any particular provision shall be made, or any procedure or arrangement shall be complied with, the Administration may allow any other fitting, material, appliance, apparatus, item of equipment or type thereof to be fitted or carried, or any other provision, procedure or arrangement to be made in that ship, if it is satisfied by trial thereof or otherwise that such fitting, material, appliance, apparatus, item of equipment or type thereof or that any particular provision, procedure or arrangeme nt is at least as effective as

Bilaga

that required by the Code. However, the Administration may not allow operational methods or procedures to be made an alternative to a particular fitting, material, appliance, apparatus, item of equipment, or type thereof, which are prescribed by the Code, unless such substitution is specifically allowed by the Code.

1.4.2 When the Administration allows any fitting, material, appliance, apparatus, item of equipment, or type thereof, or provision, procedure, or arrangement, or novel design or application to be substituted, it shall communicate to the Organization the particulars thereof, together with a report on the evidence submitted, so that the Organization may circulate the same to other Contracting Governments to SOLAS and Parties to MARPOL for the information of their officers.

1.5 Surveys and certification

1.5.1 Survey procedure

1.5.1.1 The survey of ships, so far as regards the enforcement of the provisions of the regulations and granting of exemptions therefrom, sha ll be carried out by officers of the Administration. The Administration may, however, entrust the surveys either to surveyors nominated for the purpose or to organizations recognized by it.

1.5.1.2 The recognized organization, referred to in regulation 8.2.1 of MARPOL Annex II shall comply with the guidelines adopted by the Organization by resolution A.739(18), as may be amended by the Organization, and the specification adopted by the Organization by resolution A.789(19), as may be amended by the Organization, provided that such amendments are adopted, brought into force and take effect in accordance with the provisions of article 16 of MARPOL and article VIII of SOLAS concerning the amendment procedures applicable to this Code.

1.5.1.3 The Administratio n nominating surveyors or recognizing organizations to conduct surveys shall, as a minimum, empower any nominated surveyor or recognized organization to:

.1 require repairs to a ship; and

.2 carry out surveys if requested by the appropriate authorities of a port State.

The Administration shall notify the Organization of the specific responsibilities and conditions of the authority delegated to nominated surveyors or recognized organizations for circulation to the Contracting Governments.

Bilaga

1.5.1.4 When a nominated surveyor or recognized organization determines that the condition of a ship or its equipment does not correspond substantially with the particulars of the International Certificate of Fitness for the Carriage of Dangerous Chemicals in Bulk, or is such that the ship is not fit to proceed to sea without danger to the ship, or persons on board, or without presenting unreasonable threat of harm to the marine environment, such surveyor or organization shall immediately ensure that corrective action is taken and shall, in due course, notify the Administration. If such corrective action is not taken the Certificate shall be withdrawn and the Administration shall be notified immediately. If the ship is in a port of another Contracting Government, the appropriate authorities of the port State shall also be notified immediately. When an officer of the Administration, a nominated surveyor or a recognized organization has notified the appropriate authorities of the port State, the Government of the port State concerned shall give such officer, surveyor or organization any necessary assistance to carry out their obligations under this paragraph. When applicable, the Government of the port State concerned shall take such steps as will ensure that the ship does not sail until it can proceed to sea or leave the port for the purpose of proceeding to the nearest appropriate repair yard available without danger to the ship or persons on board or without presenting an unreasonable threat of harm to the marine environment.

1.5.1.5 In every case, the Administration shall guarantee the completeness and efficiency of the survey, and shall undertake to ensure the necessary arrangements to satisfy this obligation.

1.5.2 Survey requirements

1.5.2.1 The structure, equipment, fittings, arrangements and material (other than items in respect of which a Cargo Ship Safety Construction Certificate, Cargo Ship Safety Equipment Certificate and Cargo Ship Safety Radio Certificate or Cargo Ship Safety Certificate are issued) of a chemical tanker shall be subjected to the following surveys:

.1 An initial survey before the ships is put in service or before the International Certificate of Fitness for the Carriage of Dangerous Chemicals in Bulk is issued for the first time, which shall include a complete examination of its structure, equipment, fittings, arrangements and material in so far as the ship is covered by the Code. This survey shall be such as to ensure that the structure, equipment, fittings, arrangements and material fully comply with the applicable provisions of the Code.

.2 A renewal survey at intervals specified by the Administration, but not exceeding 5 years, except where 1.5.6.2.2, 1.5.6.5, 1.5.6.6 or 1.5.6.7 is applicable. The renewal survey shall be such as to ens ure that the structure, equipment, fittings, arrangements and material fully comply with the applicable provisions of the Code.

.3 An intermediate survey within 3 months before or after the second anniversary date or within 3 months before or after the third anniversary date of the Certificate, which shall take the place of one of the annual surveys specified in 1.5.2.1.4. The intermediate survey shall be such as to ensure that the safety equipment, and other equipment, and associate pump and piping systems fully comply with the applicable provisions of the Code and are in good working order. Such intermediate surveys shall be endorsed on the Certificate issued under 1.5.4 or 1.5.5.

Bilaga

.4 An annual survey within 3 months before or after each anniversary date of the Certificate, including a general inspection of the structure, equipment, fittings, arrangements and material referred to in 1.5.2.1.1 to ensure that they have been maintained in accordance with 1.5.3 and that they remain satisfactory for the service for which the ship is intended. Such annual surveys shall be endorsed on the Certificate issued under 1.5.4 or 1.5.5.

.5 An additional survey, either general or partial according to the circumstances, shall be made when required after an investigatio n prescribed in 1.5.3.3, or whenever any important repairs or renewals are made. Such a survey shall ensure that the necessary repairs or renewals have been effectively made, that the material and workmanship of such repairs or renewals are satisfactory; and that the ship is fit to proceed to sea without danger to the ship or persons on board or without presenting unreasonable threat of harm to the marine environment.

1.5.3 Maintenance of conditions after survey

1.5.3.1 The conditions of the ship and its equipment shall be maintained to conform with the provisions of the Code to ensure that the ship will remain fit to proceed to sea without danger to the ship or persons on board or without presenting an unreasonable threat of harm to the marine environment.

1.5.3.2 After any survey of the ship under 1.5.2 has been completed, no change shall be made in the structure, equipment, fittings, arrangements and material covered by the survey, without the sanction of the Administration, except by direct replacement.

1.5.3.3 Whenever an accident occurs to a ship or a defect is discovered, either of which affects the safety of the ship or the efficiency or completeness of its life-saving appliances or other equipment covered by the Code, the master or owner of the ship shall report at the earliest opportunity to the Administration, the nominated surveyor or recognized organization responsible for issuing the Certificate, who shall cause investigations to be initiated to determine whether a survey, as required by 1.5.2.1.5, is necessary. If the ship is in a port of another Contracting Government, the master or owner shall also report immediately to the appropriate authorities of the port State and the nominated surveyor or recognized organization shall ascertain that such a report has been made.

1.5.4 Issue or endorsement of International Certificate of Fitness

1.5.4.1 An International Certificate of Fitness for the Carriage of Dangerous Chemicals in Bulk shall be issued after an initial or renewal survey to a chemical tanker engaged in international voyages which complies with the relevant provisions of the Code.

1.5.4.2 Such a Certificate shall be drawn up in the form corresponding to the model given in the appendix. If the language used is not English, French or Spanish, the text shall include the translation into one of these languages.

1.5.4.3 The Certificate issued under provisions of this section shall be available on board for examination at all times.

Bilaga

1.5.5 Issue or endorsement of International Certificate of Fitness by another Government

1.5.5.1 A Government that is both a Contracting Government to the 1974 SOLAS Convention and a Party to MARPOL 73/78 may, at the request of another such Government, cause a ship entitled to fly the flag of the other State to be surveyed and, if satisfied that the provisions of the Code are complied with, issue or authorize the issue of the International Certificate of Fitness for the Carriage of Dangerous Chemicals in Bulk to the ship, and, where appropriate, endorse or authorize the endorsement of the Certificate on board the ship in accordance with the Code. Any Certificate so issued shall contain a statement to the effect that it has been issued at the request of the Government of the State whose flag the ship is entitled to fly.

1.5.6 Duration and validity of International Certificate of Fitness

1.5.6.1 An International Certificate of Fitness for the Carriage of Dangerous Chemicals in Bulk shall be issued for a period specified by the Administration which shall not exceed 5 years.

1.5.6.2.1 Notwithstanding the provisions of 1.5.6.1, when the renewal survey is completed within 3 months before the expiry date of the existing Certificate, the new Certificate shall be valid from the date of completion of the renewal survey to a date not exceeding 5 years from the date of expiry of the existing Certificate.

1.5.6.2.2 When the renewal survey is completed after the expiry date of the existing Certificate, the new Certificate shall be valid from the date of completion of the renewal survey to a date not exceeding 5 years from the date of expiry of the existing Certificate.

1.5.6.2.3 When the renewal survey is completed more than 3 months before the expiry date of the existing Certificate, the new Certificate shall be valid from the date of completion of the renewal survey to a date not exceeding 5 years from the date of completion of the renewal survey.

1.5.6.3 If a Certificate is issued for a period of less than 5 years, the Administration may extend the validity of the Certificate beyond the expiry date to the maximum period specified in 1.5.6.1, provided that the surveys referred to in 1.5.2.1.3 and 1.5.2.1.4, applicable when a Certificate is issued for a period of 5 years, are carried out as appropriate.

1.5.6.4 If a renewal survey has been completed and a new Certificate cannot be issued or placed on board the ship before the expiry date of the existing Certificate, the person or organization authorized by the Administration may endorse the existing Certificate. Such a Certificate shall be accepted as valid for a further period which shall not exceed 5 months from the expiry date.

1.5.6.5 If a ship, at the time when a Certificate expires, is not in a port in which it is to be surveyed, the Administration may extend the period of validity of the Certificate but this extension shall be granted only for the purpose of allowing the ship to complete its voyage to the port in which it is to be surveyed, and then only in cases where it appears proper and reasonable to do so.

1.5.6.6 A Certificate, issued to a ship engaged on short voyages which has not been extended under the foregoing provisions of this section, may be extended by the Administration for a period of grace of up to one month from the date of expiry stated on it. When the renewal survey is completed, the new Certificate shall be valid to a date not exceeding 5 years from the date of expiry of the existing Certificate before the extension was granted.

Bilaga

1.5.6.7 In special circumstances, as determined by the Administration, a new Certificate need not be dated from the date of expiry of the existing Certificate as required by 1.5.6.2.2, 1.5.6.5 or 1.5.6.6. In these special circumstances, the new Certificate shall be valid to a date not exceeding 5 years from the date of completion of the renewal survey.

1.5.6.8 If an annual or intermediate survey is completed before the period specified in 1.5.2, then:

.1 the anniversary date shown on the Certificate shall be amended by endorsement to a date which shall not be more than 3 months later than the date on which the survey was completed;

.2 the subsequent annual or intermediate survey required by 1.5.2 shall be completed at the intervals prescribed by that section using the new anniversary date; and

.3 the expiry date may remain unchanged provided one or more annual or intermediate surveys, as appropriate, are carried out so that the maximum intervals between the surveys prescribed by 1.5.2 are not exceeded.

1.5.6.9 A Certificate issued under 1.5.4 or 1.5.5 shall cease to be valid in any of the following cases:

.1 if the relevant surveys are not completed within the periods specified under 1.5.2;

.2 if the Certificate is not endorsed in accordance with 1.5.2.1.3 or 1.5.2.1.4;

.3 upon transfer of the ship to the flag of another State. A new certificate shall only be issued when the Government issuing the new Certificate is fully satisfied that the ship is in compliance with the requirements of 1.5.3.1 and 1.5.3.2. In the case of a transfer between Governments that are both a Contracting Government to the 1974 SOLAS Convention and a Party to MARPOL 73/78, if requested within 3 months after the transfer has taken place, the Government of the State whose flag the ship was formerly entitled to fly shall, as soon as possible, transmit to the Administration copies of the Certificate carried by the ship before the transfer and, if available, copies of the relevant survey reports.

Bilaga

Chapter 2 Ship survival capability and location of cargo tanks

2.1 General

2.1.1 Ships, subject to the Code, shall survive the normal effects of flooding following assumed hull damage caused by some external force. In addition, to safeguard the ship and the environment, the cargo tanks of certain types of ships shall be protected from penetration in the case of minor damage to the ship resulting, for example, from contact with a jetty or tug, and given a measure of protection from damage in the case of collision or stranding, by locating them at specified minimum distances inboard from the ship's shell plating. Both the assumed damage and the proximity of the cargo tanks to the ship's shell shall be dependent upon the degree of hazard presented by the products to be carried.

2.1.2 Ships subject to the Code shall be designed to one of the following standards:

.1 A type 1 ship is a chemical tanker intended to transport chapter 17 products with very severe environmental and safety hazards which require maximum preventive measures to preclude an escape of such cargo.

.2 A type 2 ship is a chemical tanker intended to transport chapter 17 products with appreciably severe environmental and safety hazards which require significant preventive measures to preclude an escape of such cargo.

.3 A type 3 ship is a chemical tanker intended to transport chapter 17 products with sufficiently severe environmental and safety hazards which require a moderate degree of containment to increase survival capability in a damaged condition.

Thus, a type 1 ship is a chemical tanker intended for the transportation of products considered to present the greatest overall hazard and type 2 and type 3 for products of progressively lesser hazards. Accordingly, a type 1 ship shall survive the most severe standard of damage and its cargo tanks shall be located at the maximum prescribed distance inboard from the shell plating.

2.1.3 The ship type required for individual products is indicated in column e in the table of chapter 17.

2.1.4 If a ship is intended to carry more than one product listed in chapter 17, the standard of damage shall correspond to that product having the most stringent ship type requirement. The requirements for the location of individual cargo tanks, however, are those for ship types related to the respective products intended to be carried.

2.2 Freeboard and intact stability

2.2.1 Ships subject to the Code may be assigned the minimum freeboard permitted by the International Convention on Load Lines in force. However, the draught associated with the assignment shall not be greater than the maximum draught otherwise permitted by this Code.

2.2.2 The stability of the ship in all seagoing conditions shall be to a standard which is acceptable to the Administration.

Bilaga

2.2.3 When calculating the effect of free surfaces of consumable liquids for loading conditions it shall be assumed that, for each type of liquid, at least one transverse pair or a single centre tank has a free surface and the tank or combination of tanks to be taken into account shall be those where the effect of free surfaces is the greatest. The free surface effect in undamaged compartments shall be calculated by a method acceptable to the Administration.

2.2.4 Solid ballast shall not normally be used in double-bottom spaces in the cargo area. Where, however, because of stability considerations, the fitting of solid ballast in such spaces becomes unavoidable, then its disposition shall be governed by the need to ensure that the impact loads resulting from bottom damage are not directly transmitted to the cargo tank structure.

2.2.5 The master of the ship shall be supplied with a loading and stability information booklet. This booklet shall contain details of typical service and ballast conditions, provisions for evaluating other conditions of loading and a summary of the ship's survival capabilities. In addition, the booklet shall contain sufficient information to enable the master to load and operate the ship in a safe and seaworthy manner.

2.3 Shipside discharges below the freeboard deck

2.3.1 The provision and control of valves fitted to discharges led through the shell from spaces below the freeboard deck or from within the super-structures and deck-houses on the freeboard deck fitted with weathertight doors shall comply with the requirements of the relevant regulation of the International Convention on Load Lines in force, except that the choice of valves shall be limited to:

.1 one automatic non-return valve with a positive means of closing from above the freeboard deck; or

.2 where the vertical distance from the summer load waterline to the inboard end of the discharge pipe exceeds 0.01L, two automatic non-return valves without positive means of closing, provided that the inboard valve is always accessible for examination under service conditions.

2.3.2 For the purpose of this chapter, “summer load line” and “freeboard deck” have the meanings as defined in the International Convention on Load Lines in force.

2.3.3 The automatic non-return valves referred to in 2.3.1.1 and 2.3.1.2 shall be fully effective in preventing admission of water into the ship, taking into account the sinkage, trim and heel in survival requirements in 2.9, and shall comply with recognized standards.

2.4 Conditions of loading

Damage survival capability shall be investigated on the basis of loading information submitted to the Administration for all anticipated conditions of loading and variations in draught and trim. Ballast conditions where the chemical tanker is not carrying products covered by the Code, or is carrying only residues of such products, need not be considered.

Bilaga

2.5 Damage assumptions

2.5.1 The assumed maximum extent of damage shall be:

.1 Side damage:

2/3 .1.1 Longitudinal extent: 1/3L or 14.5 m, whichever is less .1.2 Transverse extent B/5 or 11.5 m, whichever is less (measured inboard from the ship’s side at right angles to the centreline at the level of the summer load line) .1.3 Vertical extent: upwards without limit (measured from the moulded line of the bottom shell plating at centreline)

.2 Bottom damage: For 0.3L from the forward Any other part of the perpendicular of the ship ship

2/3 2/3 .2.1 Longitudinal extent: 1/3L or 14.5 m, 1/3L or 5 m, whichever is less whichever is less .2.2 Transverse extent: B/6 or 10 m, B/6 or 5 m, whichever is less whichever is less .2.3 Vertical extent: B/15 or 6 m, B/15 or 6 m, whichever is less whichever is less [measured from the [measured from the moulded line of the bottom moulded line of the shell plating at centreline bottom shell plating at (see 2.6.2)] centreline (see 2.6.2)]

2.5.2 If any damage of a lesser extent than the maximum damage specified in 2.5.1 would result in a more severe condition, such damage shall be considered.

2.6 Location of cargo tanks

2.6.1 Cargo tanks shall be located at the following distances inboard:

.1 Type 1 ships: from the side shell plating, not less than the transverse extent of damage specified in 2.5.1.1.2, and from the moulded line of the bottom shell plating at centreline, not less than the vertical extent of damage specified in 2.5.1.2.3, and nowhere less than 760 mm from the shell plating. This requirement does not apply to the tanks for diluted slops arising from tank washing.

.2 Type 2 ships: from the moulded line of the bottom shell plating at centreline, not less than the vertical extent of damage specified in 2.5.1.2.3, and nowhere less than 760 mm from the shell plating. This requirement does not apply to the tanks for diluted slops arising from tank washing.

.3 Type 3 ships: no requirement.

Bilaga

2.6.2 Except for type 1 ships, suction wells installed in cargo tanks may protrude into the vertical extent of bottom damage specified in 2.5.1.2.3 provided that such wells are as small as practicable and the protrusion below the inner bottom plating does not exceed 25% of the depth of the double bottom or 350 mm, whichever is less. Where there is no double bottom, the protrusion of the suction well of independent tanks below the upper limit of bottom damage shall not exceed 350 mm. Suction wells installed in accordance with this paragraph may be ignored in determining the compartments affected by damage.

2.7 Flooding assumptions

2.7.1 The requirements of 2.9 shall be confirmed by calculations which take into consideration the design characteristics of the ship; the arrangements, configuration and contents of the damaged compartments; the distribution, relative densities and the free surface effects of liquids; and the draught and trim for all conditions of loading.

2.7.2 The permeabilities of spaces assumed to be damaged shall be as follows:

Spaces Permeabilities

Appropriated to stores 0.60 Occupied by accommodation 0.95 Occupied by machinery 0.85 Voids 0.95 * Intended for consumable liquids 0 to 0.95 Intended for other liquids 0 to 0.95*

2.7.3 Wherever damage penetrates a tank containing liquids it shall be assumed that the contents are completely lost from that compartment and replaced by salt water up to the level of the final plane of equilibrium.

2.7.4 Every watertight division within the maximum extent of damage defined in 2.5.1 and considered to have sustained damage in positions given in 2.8.1 shall be assumed to be penetrated. Where damage less than the maximum is being considered in accordance with 2.5.2, only watertight divisions or combinations of watertight divisions within the envelope of such lesser damage shall be assumed to be penetrated.

2.7.5 The ship shall be so designed as to keep unsymmetrical flooding to the minimum consistent with efficient arrangements.

2.7.6 Equalization arrangements requiring mechanical aids such as valves or cross-levelling pipes, if fitted, shall not be considered for the purpose of reducing an angle of heel or attaining the minimum range of residual stability to meet the requirements of 2.9 and sufficient residual stability shall be maintained during all stages where equalization is used. Spaces which are linked by ducts of large cross-sectional area may be considered to be common.

2.7.7 If pipes, ducts, trunks or tunnels are situated within the assumed extent of damage penetration, as defined in 2.5, arrangements shall be such that progressive flooding cannot thereby extend to compartments other than those assumed to be flooded for each case of damage.

* The permeability of partially filled compartments shall be consistent with the amount of liquid carried in the compartment.

Bilaga

2.7.8 The buoyancy of any superstructure directly above the side damage shall be disregarded. The unflooded parts of superstructures beyond the extent of damage, however, may be taken into consideration provided that:

.1 they are separated from the damaged space by watertight divisions and the requirements of 2.9.3 in respect of these intact spaces are complied with; and

.2 openings in such divisions are capable of being closed by remotely operated sliding watertight doors and unprotected openings are not immersed within the minimum range of residual stability required in 2.9; however, the immersion of any other openings capable of being closed weathertight may be permitted.

2.8 Standard of damage

2.8.1 Ships shall be capable of surviving the damage indicated in 2.5 with the flooding assumptions in 2.7 to the extent determined by the ship's type according to the following standards:

.1 A type 1 ship shall be assumed to sustain damage anywhere in its length.

.2 A type 2 ship of more than 150 m in length shall be assumed to sustain damage anywhere in its length.

.3 A type 2 ship of 150 m in length or less shall be assumed to sustain damage anywhere in its length except involving either of the bulkheads bounding a machinery space located aft.

.4 A type 3 ship of more than 225 m in length shall be assumed to sustain damage anywhere in its length.

.5 A type 3 ship of 125 m in length or more but not exceeding 225 m in length shall be assumed to sustain damage anywhere in its length except involving either of the bulkheads bounding a machinery space located aft.

.6 A type 3 ship below 125 m in length shall be assumed to sustain damage anywhere in its length except involving damage to the machinery space when located aft. However, the ability to survive the flooding of the machinery space shall be considered by the Administration.

2.8.2 In the case of small type 2 and type 3 ships which do not comply in all respects with the appropriate requirements of 2.8.1.3 and 2.8.1.6, special dispensation may only be considered by the Administration provided that alternative measures can be taken which maintain the same degree of safety. The nature of the alternative measures shall be approved and clearly stated and be available to the port Administration. Any such dispensation shall be duly noted on the International Certificate of Fitness referred to in 1.5.4.

2.9 Survival requirements

2.9.1 Ships subject to the Code shall be capable of surviving the assumed damage specified in 2.5 to the standard provided in 2.8 in a condition of stable equilibrium and shall satisfy the following criteria.

Bilaga

2.9.2 In any stage of flooding:

.1 the waterline, taking into account sinkage, heel and trim, shall be below the lower edge of any opening through which progressive flooding or downflooding may take place. Such openings shall include air pipes and openings which are closed by means of weathertight doors or hatch covers and may exclude those openings closed by means of watertight manhole covers and watertight flush scuttles, small watertight cargo tank hatch covers which maintain the high integrity of the deck, remotely operated watertight sliding doors, and sidescuttles of the non-opening type;

.2 the maximum angle of heel due to unsymmetrical flooding shall not exceed 25°, except that this angle may be increased to 30° if no deck immersion occurs;

.3 the residual stability during intermediate stages of flooding shall be to the satisfaction of the Administration. However, it shall never be significantly less than that required by 2.9.3.

2.9.3 At final equilibrium after flooding:

.1 the righting-lever curve shall have a minimum range of 20° beyond the position of equilibrium in association with a maximum residual righting lever of at least 0.1 m within the 20° range; the area under the curve within this range shall not be less than 0.0175 m radians. Unprotected openings shall not be immersed within this range unless the space concerned is assumed to be flooded. Within this range, the immersion of any of the openings listed in 2.9.2.1 and other openings capable of being closed weathertight may be permitted; and

.2 the emergency source of power shall be capable of operating.

Bilaga

Chapter 3 Ship arrangements

3.1 Cargo segregation

3.1.1 Unless expressly provided otherwise, tanks containing cargo or residues of cargo subject to the Code shall be segregated from accommodation, service and machinery spaces and from drinking water and stores for human consumption by means of a cofferdam, void space, cargo pump-room, pump-room, empty tank, oil fuel tank or other similar space. 3.1.2 Cargo piping shall not pass through any accommodation, service or machinery space other than cargo pump-rooms or pump-rooms. 3.1.3 Cargoes, residues of cargoes or mixtures containing cargoes, which react in a hazardous manner with other cargoes, residues or mixtures, shall: .1 be segregated from such other cargoes by means of a cofferdam, void space, cargo pump-room, pump-room, empty tank, or tank containing a mutually compatible cargo; .2 have separate pumping and piping systems which shall not pass through other cargo tanks containing such cargoes, unless encased in a tunnel; and .3 have separate tank venting systems. 3.1.4 If cargo piping systems or cargo ventilation systems are to be separated. This separation may be achieved by the use of design or operational methods. Operational methods shall not be used within a cargo tank and shall consist of one of the following types: .1 removing spool-pieces or valves and blanking the pipe ends; .2 arrangement of two spectacle flanges in series, with provisions for detecting leakage into the pipe between the two spectacle flanges. 3.1.5 Cargoes subject to the Code shall not be carried in either the fore or aft peak tank.

3.2 Accommodation, service and machinery spaces and control stations

3.2.1 No accommodation or service spaces or control stations shall be located within the cargo area except over a cargo pump-room recess or pump-room recess that complies with SOLAS regulations II-2/4.5.1 to 4.5.2.4 and no cargo or slop tank shall be aft of the forward end of any accommodation. 3.2.2 In order to guard against the danger of hazardous vapours, due consideration shall be given to the location of air intakes and openings into accommodation, service and machinery spaces and control stations in relation to cargo piping and cargo vent systems.

Bilaga

3.2.3 Entrances, air inlets and openings to accommodation, service and machinery spaces and control stations shall not face the cargo area. They shall be located on the end bulkhead not facing the cargo area and/or on the outboard side of the superstructure or deck-house at a distance of at least 4% of the length (L) of the ship but not less than 3 m from the end of the superstructure or deck-house facing the cargo area. This distance, however, need not exceed 5 m. No doors shall be permitted within the limits mentioned above, except that doors to those spaces not having access to accommodation and service spaces and control stations, such as cargo control stations and store-rooms, may be fitted. Where such doors are fitted, the boundaries of the space sha ll be insulated to “A-60” standard. Bolted plates for removal of machinery may be fitted within the limits specified above. Wheelhouse doors and wheelhouse windows may be located within the limits specified above so long as they are so designed that a rapid and efficient gas- and vapour-tightening of the wheelhouse can be ensured. Windows and sidescuttles facing the cargo area and on the sides of the superstructures and deck-houses within the limits specified above shall be of the fixed (non-opening) type. Such sidescuttles in the first tier on the main deck shall be fitted with inside covers of steel or equivalent material.

3.3 Cargo pump-rooms

3.3.1 Cargo pump-rooms shall be so arranged as to ensure:

.1 unrestricted passage at all times from any ladder platform and from the floor; and

.2 unrestricted access to all valves necessary for cargo handling for a person wearing the required personnel protective equipment.

3.3.2 Permanent arrangements shall be made for hoisting an injured person with a rescue line while avoiding any projecting obstacles.

3.3.3 Guard railings shall be installed on all ladders and platforms.

3.3.4 Normal access ladders shall not be fitted vertical and shall incorporate platforms at suitable intervals.

3.3.5 Means shall be provided to deal with drainage and any possible leakage from cargo pumps and valves in cargo pump-rooms. The bilge system serving the cargo pump-room shall be operable from outside the cargo pump-room. One or more slop tanks for storage of contaminated bilge water or tank washings shall be provided. A shore connection with a standard coupling or other facilities shall be provided for transferring contaminated liquids to onshore reception facilities.

3.3.6 Pump discharge pressure gauges shall be provided outside the cargo pump-room.

3.3.7 Where machinery is driven by shafting passing through a bulkhead or deck, gastight seals with efficient lubrication or other means of ensuring the permanence of the gas seal shall be fitted in way of the bulkhead or deck.

Bilaga

3.4 Access to spaces in the cargo area

3.4.1 Access to cofferdams, ballast tanks, cargo tanks and other spaces in the cargo area shall be direct from the open deck and such as to ensure their complete inspection. Access to double-bottom spaces may be through a cargo pump-room, pump-room, deep cofferdam, pipe tunnel or similar compartments, subject to consideration of ventilation aspects.

3.4.2 For access through horizontal openings, hatches or manholes, the dimensions shall be sufficient to allow a person wearing a self-contained air-breathing apparatus and protective equipment to ascend or descend any ladder without obstruction and also to provide a clear opening to facilitate the hoisting of an injured person from the bottom of the space. The minimum clear opening shall be not less than 600 mm by 600 mm.

3.4.3 For access through vertical openings, or manholes providing passage through the length and breadth of the space, the minimum clear opening shall be not less than 600 mm by 800 mm at a height of not more than 600 mm from the bottom shell plating unless gratings or other footholds are provided.

3.4.4 Smaller dimensions may be approved by the Administration in special circumstances, if the ability to traverse such openings or to remove an injured person can be proved to the satisfaction of the Administration.

3.5 Bilge and ballast arrangements

3.5.1 Pumps, ballast lines, vent lines and other similar equipment serving permanent ballast tanks shall be independent of similar equipment serving cargo tanks and of cargo tanks themselves. Discharge arrangements for permanent ballast tanks sited immediately adjacent to cargo tanks shall be outside machinery spaces and accommodation spaces. Filling arrangements may be in the machinery spaces provided that such arrangements ensure filling from tank deck level and non-return valves are fitted.

3.5.2 Filling of ballast in cargo tanks may be arranged from deck level by pumps serving permanent ballast tanks, provided that the filling line has no permanent connection to cargo tanks or piping and that non-return valves are fitted.

3.5.3 Bilge pumping arrangements for cargo pump-rooms, pump-rooms, void spaces, slop tanks, double-bottom tanks and similar spaces shall be situated entirely within the cargo area except for void spaces, double-bottom tanks and ballast tanks where such spaces are separated from tanks containing cargo or residues of cargo by a double bulkhead.

3.6 Pump and pipeline identification

Provisions shall be made for the distinctive marking of pumps, valves and pipelines to identify the service and tanks which they serve.

3.7 Bow or stern loading and unloading arrangements

3.7.1 Cargo piping may be fitted to permit bow or stern loading and unloading. Portable arrangements shall not be permitted.

Bilaga

3.7.2 Bow or stern loading and unloading lines shall not be used for the transfer of products required to be carried in type 1 ships. Bow and stern loading and unloading lines shall not be used for the transfer of cargoes emitting toxic vapours required to comply with 15.12.1, unless specifically approved by the Administration.

3.7.3 In addition to 5.1, the following provisions apply:

.1 The piping outside the cargo area shall be fitted at least 760 mm inboard on the open deck. Such piping shall be clearly identified and fitted with a shutoff valve at its connection to the cargo piping system within the cargo area. At this location, it shall also be capable of being separated by means of a removable spool-piece and blank flanges when not in use.

.2 The shore connection shall be fitted with a shutoff valve and a blank flange.

.3 The piping shall be full-penetration butt-welded, and fully radiographed. Flange connections in the piping shall only be permitted within the cargo area and at the shore connection.

.4 Spray shields shall be provided at the connections specified in 3.7.3.1 as well as collecting trays of sufficient capacity, with means for the disposal of drainage.

.5 The piping shall be self-draining to the cargo area and preferably into a cargo tank. Alternative arrangements for draining the piping may be accepted by the Administration.

.6 Arrangements shall be made to allow such piping to be purged after use and maintained gas-safe when not in use. The vent pipes connected with the purge shall be located in the cargo area. The relevant connections to the piping shall be provided with a shutoff valve and blank flange.

3.7.4 Entrances, air inlets and openings to accommodation, service and machinery spaces and control stations shall not face the cargo shore-connection location of bow or stern loading and unloading arrangements. They shall be located on the outboard side of the superstructure or deck-house at a distance of at least 4% of the length of the ship but not less than 3 m from the end of the house facing the cargo shore-connection location of the bow or stern loading and unloading arrangements. This distance, however, need not exceed 5 m. Sidescuttles facing the shore-connection location and on the sides of the superstructure or deck-house within the distance mentioned above shall be of the fixed (non-opening) type. In addition, during the use of the bow or stern loading and unloading arrangements, all doors, ports and other openings on the corresponding superstructure or deck-house side shall be kept closed. Where, in the case of small ships, compliance with 3.2.3 and this paragraph is not possible, the Administration may approve relaxations from the above requirements.

3.7.5 Air pipes and other openings to enclosed spaces not listed in 3.7.4 shall be shielded from any spray which may come from a burst hose or connection.

3.7.6 Escape routes shall not terminate within the coamings required by 3.7.7 or within a distance of 3 m beyond the coamings.

Bilaga

3.7.7 Continuous coamings of suitable height shall be fitted to keep any spills on deck and away from the accommodation and service areas. 3.7.8 Electrical equipment within the coamings required by 3.7.7 or within a distance of 3 m beyond the coamings shall be in accordance with the requirements of chapter 10. 3.7.9 Fire-fighting arrangements for the bow or stern loading and unloading areas shall be in accordance with 11.3.16. 3.7.10 Means of communication between the cargo control station and the cargo shore-connection location shall be provided and certified safe, if necessary. Provision shall be made for the remote shutdown of cargo pumps from the cargo shore-connection location.

Bilaga

Chapter 4 Cargo containment

4.1 Definitions

4.1.1 Independent tank means a cargo-containment envelope, which is not contiguous with, or part of, the hull structure. An independent tank is built and installed so as to eliminate whenever possible (or in any event to minimize) its stressing as a result of stressing or motion of the adjacent hull structure. An independent tank is not essential to the structural completeness of the ship's hull.

4.1.2 Integral tank means a cargo-containment envelope which forms part of the ship's hull and which may be stressed in the same manner and by the same loads which stress the contiguous hull structure and which is normally essential to the structural completeness of the ship's hull.

4.1.3 Gravity tank means a tank having a design pressure not greater than 0.07 MPa gauge at the top of the tank. A gravity tank may be independent or integral. A gravity tank shall be constructed and tested according to recognized standards, taking account of the temperature of carriage and relative density of the cargo.

4.1.4 Pressure tank means a tank having a design pressure greater than 0.07 MPa gauge. A pressure tank shall be an independent tank and shall be of a configuration permitting the application of pressure-vessel design criteria according to recognized standards.

5.3 Flange connections

5.3.1 Flanges shall be of the welded-neck, slip-on or socket-welded type. However, socket-welded-type flanges shall not be used in nominal size above 50 mm. 5.3.2 Flanges shall comply with recognized standards as to their type, manufacture and test.

5.4 Test requirements for piping

5.4.1 The test requirements of this section apply to piping inside and outside cargo tanks. However, relaxations from these requirements may be accepted in accordance with recognized standards for piping inside tanks and open-ended piping. 5.4.2 After assembly, each cargo piping system shall be subject to a hydrostatic test to at least 1.5 times the design pressure. When piping systems or parts of systems are completely manufactured and equipped with all fittings, the hydrostatic test may be conducted prior to installation aboard the ship. Joints welded on board shall be hydrostatically tested to at least 1.5 times the design pressure. 29

Bilaga

5.4.3 After assembly on board, each cargo piping system shall be tested for leaks to a pressure depending on the method applied.

5.5 Piping arrangements

5.5.1 Cargo piping shall not be installed under deck between the out-board side of the cargo-containment spaces and the skin of the ship unless clearances required for damage protection (see 2.6) are maintained; but such distances may be reduced where damage to the pipe would not cause release of cargo provided that the clearance required for inspection purposes is maintained.

5.5.2 Cargo piping located below the main deck may run from the tank it serves and penetrate tank bulkheads or boundaries common to longitudinally or transversally adjacent cargo tanks, ballast tanks, empty tanks, pump-rooms or cargo pump-rooms provided that inside the tank it serves it is fitted with a stop-valve operable from the weather deck and provided cargo compatibility is assured in the event of piping failure. As an exception, where a cargo tank is adjacent to a cargo pump-room, the stop valve operable from the weather deck may be situated on the tank bulkhead on the cargo pump-room side, provided an additional valve is fitted between the bulkhead valve and the cargo pump. A totally enclosed hydraulically operated valve located outside the cargo tank may, however, be accepted, provided that the valve is:

.1 designed to preclude the risk of leakage;

.2 fitted on the bulkhead of the cargo tank which it serves;

.3 suitably protected against mechanical damage;

.4 fitted at a distance from the shell as required for damage protection; and

.5 operable from the weather deck.

5.5.3 In any cargo pump-room where a pump serves more than one tank, a stop valve shall be fitted in the line to each tank.

5.5.4 Cargo piping installed in pipe tunnels shall also comply with the requirements of 5.5.1 and 5.5.2. Pipe tunnels shall satisfy all tank requirements for construction, location and ventilation and electrical hazard requirements. Cargo compatibility shall be assured in the event of a piping failure. The tunnel shall not have any other openings except to the weather deck and cargo pump-room or pump-room.

5.5.5 Cargo piping passing through bulkheads shall be so arranged as to preclude excessive stresses at the bulkhead and shall not utilize flanges bolted through the bulkhead.

5.6 Cargo-transfer control systems

5.6.1 For the purpose of adequately controlling the cargo, cargo-transfer systems shall be provided with:

.1 one stop-valve capable of being manually operated on each tank filling and discharge line, located near the tank penetration; if an individual deepwell pump is used to discharge the contents of a cargo tank, a stop-valve is not required on the discharge line of that tank;

Bilaga

.2 one stop valve at each cargo-hose connection;

.3 remote shutdown devices for all cargo pumps and similar equipment.

5.6.2 The controls necessary during transfer or transport of cargoes covered by the Code other than in cargo pump-rooms which have been dealt with elsewhere in the Code shall not be located below the weather deck.

5.6.3 For certain products, additional cargo-transfer control requirements are shown in column o in the table of chapter 17.

5.7 Ship's cargo hoses

5.7.1 Liquid and vapour hoses used for cargo transfer shall be compatible with the cargo and suitable for the cargo temperature.

5.7.2 Hoses subject to tank pressure or the discharge pressure of pumps shall be designed for a bursting pressure not less than 5 times the maximum pressure the hose will be subjected to during cargo transfer.

5.7.3 For cargo hoses installed on board ships on or after 1 July 2002, each new type of cargo hose, complete with end-fittings, shall be prototype-tested at a normal ambient temperature with 200 pressure cycles from zero to at least twice the specified maximum working pressure. After this cycle pressure test has been carried out, the prototype test shall demonstrate a bursting pressure of at least 5 times its specified maximum working pressure at the extreme service temperature. Hoses used for prototype testing shall not be used for cargo service. Thereafter, before being placed in service, each new length of cargo hose produced shall be hydrostatically tested at ambient temperature to a pressure not less than 1.5 times its specified maximum working pressure but not more than two-fifths of its bursting pressure. The hose shall be stencilled or otherwise marked with the date of testing, its specified maximum working pressure and, if used in services other than the ambient temperature services, its maximum and minimum service temperature, as applicable. The specified maximum working pressure shall not be less than 1 MPa gauge.

Bilaga

Chapter 6 Materials of construction, protective linings and coatings

6.1 Structural materials used for tank construction, together with associated piping, pumps, valves, vents and their jointing materials, shall be suitable at the temperature and pressure for the cargo to be carried in accordance with recognized standards. Steel is assumed to be the normal material of construction.

6.2 The shipyard is responsible for providing compatibility information to the ship operator and/or master. This must be done in a timely manner before delivery of the ship or on completion of a relevant modification of the material of construction.

6.3 Where applicable, the following should be taken into account in selecting the material of construction:

.1 notch ductility at the operating temperature;

.2 corrosive effect of the cargo; and

.3 possibility of ha zardous reactions between the cargo and the material of construction.

6.4 The shipper of the cargo is responsible for providing compatibility information to the ship operator and/or master. This must be done in a timely manner before transportation of the product. The cargo shall be compatible with all materials of construction such that:

.1 no damage to the integrity of the materials of construction is incurred; and/or

.2 no hazardous, or potentially hazardous reaction is created.

6.5 When a product is submitted to IMO for evaluation, and where compatibility of the product with materials referred to in paragraph 6.1 renders special requirements, the BLG Product Data Reporting form shall provide information on the required materials of construction. These requirements shall be reflected in chapter 15 and consequentially be referred to in column o of chapter 17. The reporting form shall also indicate if no special requirements are necessary. The producer of the product is responsible for providing the correct information.

Bilaga

Chapter 7 Cargo temperature control

7.1 General

7.1.1 When provided, any cargo heating or cooling systems shall be constructed, fitted and tested to the satisfaction of the Administration. Materials used in the construction of temperature-control systems shall be suitable for use with the product intended to be carried.

7.1.2 Heating or cooling media shall be of a type approved for use with the specific cargo. Consideration shall be given to the surface temperature of heating coils or ducts to avoid dangerous reactions from localized overheating or overcooling of cargo. (See also 15.13.6.)

7.1.3 Heating or cooling systems shall be provided with valves to isolate the system for each tank and to allow manual regulation of flow.

7.1.4 In any heating or cooling system, means shall be provided to ensure that, when in any condition other than empty, a higher pressure can be maintained within the system than the maximum pressure head that could be exerted by the cargo tank contents on the system.

7.1.5 Means shall be provided for measuring the cargo temperature.

.1 The means for measuring the cargo temperature shall be of restricted or closed type, respectively, when a restricted or closed gauging device is required for individual substances, as shown in column j in the table of chapter 17.

.2 A restricted temperature-measuring device is subject to the definition for a restricted gauging device in 13.1.1.2 (e.g. a portable thermometer lowered inside a gauge tube of the restricted type).

.3 A closed temperature-measuring device is subject to the definition for a closed gauging device in 13.1.1.3 (e.g. a remote-reading thermometer of which the sensor is installed in the tank).

.4 When overheating or overcooling could result in a dangerous condition, an alarm system which monitors the cargo temperature shall be provided. (See also operational requirements in 16.6.)

7.1.6 When products for which 15.12, 15.12.1 or 15.12.3 are listed in column o in the table of chapter 17 are being heated or cooled, the heating or cooling medium shall operate in a circuit:

.1 which is independent of other ship's services, except for another cargo heating or cooling system, and which does not enter the machinery space; or

.2 which is external to the tank carrying toxic products; or

Bilaga

.3 where the medium is sampled to check for the presence of cargo before it is recirculated to other services of the ship or into the machinery space. The sampling equipment shall be located within the cargo area and be capable of detecting the presence of any toxic cargo being heated or cooled. Where this method is used, the coil return shall be tested not only at the commencement of heating or cooling of a toxic product, but also on the first occasion the coil is used subsequent to having carried an unheated or uncooled toxic cargo.

7.2 Additional requirements

For certain products, additional requirements contained in chapter 15 are shown in column o in the table of chapter 17.

Bilaga

Chapter 8 Cargo tank venting and gas-freeing arrangements

8.1 Application

8.1.1 Unless expressly provided otherwise, this chapter applies to ships constructed on or after 1 January 1994.

8.1.2 Ships constructed before 1 January 1994 shall comply with the requirements of chapter 8 of this Code which were in force prior to the said date.

8.1.3 For the purpose of this regulation, the term “ship constructed” is as defined in SOLAS regulation II-1/1.3.1.

8.1.4 Ships constructed on or after 1 July 1986 but before 1 January 1994 which fully comply with the requirements of the Code applicable at that time may be regarded as complying with the requirements of SOLAS regulations II-2/4.5.3, 4.5.6 to 4.5.8, 4.5.10 and 11.6.

8.1.5 For ships to which the Code applies, the requirements of this chapter shall apply in lieu of SOLAS regulations II-2/4.5.3 and 4.5.6.

8.1.6 Ships constructed on or after 1 July 1986, but before 1 July 2002 shall comply with the requirements of 8.3.3.

8.2 Cargo tank venting

8.2.1 All cargo tanks shall be provided with a venting system appropriate to the cargo being carried and these systems shall be independent of the air pipes and venting systems of all other compartments of the ship. Tank venting systems shall be designed so as to minimize the possibility of cargo vapour accumulating about the decks, entering accommodation, service and machinery spaces and control stations and, in the case of flammable vapours, entering or collecting in spaces or areas containing sources of ignition. Tank venting systems shall be arranged to prevent entrance of water into the cargo tanks and, at the same time, vent outlets shall direct the vapour discharge upwards in the form of unimpeded jets.

8.2.2 The venting systems shall be connected to the top of each cargo tank and as far as practicable the cargo vent lines shall be self-draining back to the cargo tanks under all normal operational conditions of list and trim. Where it is necessary to drain venting systems above the level of any pressure/vacuum valve, capped or plugged drain cocks shall be provided.

8.2.3 Provision shall be made to ensure that the liquid head in any tank does not exceed the design head of the tank. Suitable high-level alarms, overflow control systems or spill valves, together with gauging and tank filling procedures, may be accepted for this purpose. Where the means of limiting cargo tank overpressure includes an automatic closing valve, the valve shall comply with the appropriate provisions of 15.19.

8.2.4 Tank venting systems shall be designed and operated so as to ensure that neither pressure nor vacuum created in the cargo tanks during loading or unloading exceeds tank design parameters. The main factors to be considered in the sizing of a tank venting system are as follows:

Bilaga

.1 design loading and unloading rate;

.2 gas evolution during loading: this shall be taken account of by multiplying the maximum loading rate by a factor of at least 1.25;

.3 density of the cargo vapour mixture;

.4 pressure loss in vent piping and across valves and fittings; and

.5 pressure/vacuum settings of relief devices.

8.2.5 Tank vent piping connected to cargo tanks of corrosion-resistant material, or to tanks which are lined or coated to handle special cargoes as required by the Code, shall be similarly lined or coated or constructed of corrosion-resistant material.

8.2.6 The master shall be provided with the maximum permissible loading and unloading rates for each tank or group of tanks consistent with the design of the venting systems.

8.3 Types of tank venting systems

8.3.1 An open tank venting system is a system which offers no restriction except for friction losses to the free flow of cargo vapours to and from the cargo tanks during normal operations. An open venting system may consist of individual vents from each tank, or such individual vents may be combined into a common header or headers, with due regard to cargo segregation. In no case shall shutoff valves be fitted either to the individual vents or to the header.

8.3.2 A controlled tank venting system is a system in which pressure- and vacuum-relief valves or pressure/vacuum valves are fitted to each tank to limit the pressure or vacuum in the tank. A controlled venting system may consist of individual vents from each tank or such individual vents on the pressure side only as may be combined into a common header or headers, with due regard to cargo segregation. In no case shall shut-off valves be fitted either above or below pressure- or vacuum-relief valves or pressure/vacuum valves. Provision may be made for bypassing a pressure- or vacuum-relief valve or pressure/vacuum valve under certain operating conditions provided that the requirement of 8.3.6 is maintained and that there is suitable indication to show whether or not the valve is bypassed.

8.3.3 Controlled tank venting systems shall consist of a primary and a secondary means of allowing full flow relief of vapour to prevent over-pressure or under-pressure in the event of failure of one means. Alternatively, the secondary means may consist of pressure sensors fitted in each tank with a monitoring system in the ship's cargo control room or position from which cargo operations are normally carried out. Such monitoring equipment shall also provide an alarm facility which is activated by detection of over-pressure or under-pressure conditions within a tank.

8.3.4 The position of vent outlets of a controlled tank venting system shall be arranged:

.1 at a height of not less than 6 m above the weather deck or above a raised walkway if fitted within 4 m of the raised walkway; and

.2 at a distance of at least 10 m measured horizontally from the nearest air intake or opening to accommodation, service and machinery spaces and ignition sources.

Bilaga

8.3.5 The vent outlet height referred to in 8.3.4.1 may be reduced to 3 m above the deck or a raised walkway, as applicable, provided that high-velocity venting valves of an approved type, directing the vapour/air mixture upwards in an unimpeded jet with an exit velocity of at least 30 m/s, are fitted.

8.3.6 Controlled tank venting systems fitted to tanks to be used for cargoes having a flashpoint not exceeding 60°C (closed-cup test) shall be provided with devices to prevent the passage of flame into the cargo tanks. The design, testing and locating of the devices shall comply with the requirements of the Administration, which shall contain at least the standards adopted by the Organization.

8.3.7 In designing venting systems and in the selection of devices to prevent the passage of flame for incorporation into the tank venting system, due attention shall be paid to the possibility of the blockage of these systems and fittings by, for example, the freezing of cargo vapour, polymer build-up, atmospheric dust or icing up in adverse weather conditions. In this context it shall be noted that flame arresters and flame screens are more susceptible to blockage. Provisions shall be made such that the system and fittings may be inspected, operationally checked, cleaned or renewed as applicable.

8.3.8 Reference in 8.3.1 and 8.3.2 to the use of shutoff valves in the venting lines shall be interpreted to extend to all other means of stoppage, including spectacle blanks and blank flanges.

8.4 Venting requirements for individual products

Venting requirements for individual products are shown in column g, and additional requirements in column o in the table of chapter 17.

8.5 Cargo tank gas-freeing

8.5.1 The arrangements for gas-freeing cargo tanks used for cargoes other than those for which open venting is permitted shall be such as to minimize the hazards due to the dispersal of flammable or toxic vapours in the atmosphere and to flammable or toxic vapour mixtures in a cargo tank. Accordingly, gas-freeing operations shall be carried out such that vapour is initially discharged:

.1 through the vent outlets specified in 8.3.4 and 8.3.5; or

.2 through outlets at least 2 m above the cargo tank deck level with a vertical exit velocity of at least 30 m/s maintained during the gas-freeing operation; or

.3 through outlets at least 2 m above the cargo tank deck level with a vertical exit velocity of at least 20 m/s which are protected by suitable devices to prevent the passage of flame.

When the flammable vapour concentration at the outlets has been reduced to 30% of the lower flammable limit and, in the case of a toxic product, the vapour concentration does not present a significant health hazard, gas-freeing may thereafter be continued at cargo tank deck level.

8.5.2 The outlets referred to in 8.5.1.2 and 8.5.1.3 may be fixed or portable pipes.

Bilaga

8.5.3 In designing a gas-freeing system in conformity with 8.5.1, particularly in order to achieve the required exit velocities of 8.5.1.2 and 8.5.1.3, due consideration shall be given to the following: .1 materials of construction of system; .2 time to gas-free; .3 flow characteristics of fans to be used; .4 the pressure losses created by ducting, piping, cargo tank inlets and outlets; .5 the pressure achievable in the fan driving medium (e.g. water or compressed air); and .6 the densities of the cargo vapour/air mixtures for the range of cargoes to be carried.

Bilaga

Chapter 9 Environmental control

9.1 General

9.1.1 Vapour spaces within cargo tanks and, in some cases, spaces surrounding cargo tanks may require to have specially controlled atmospheres.

9.1.2 There are four different types of control for cargo tanks, as follows:

.1 Inerting: by filling the cargo tank and associated piping systems and, where specified in chapter 15, the spaces surrounding the cargo tanks, with a gas or vapour which will not support combustion and which will not react with the cargo, and maintaining that condition.

.2 Padding: by filling the cargo tank and associated piping systems with a liquid, gas or vapour which separates the cargo from the air, and maintaining that condition.

.3 Drying: by filling the cargo tank and associated piping systems with moisturefree gas or vapour with a dewpoint of -40°C or below at atmospheric pressure, and maintaining that condition.

.4 Ventilation: forced or natural.

9.1.3 Where inerting or padding of cargo tanks is required:

.1 An adequate supply of inert gas for use in filling and discharging the cargo tanks shall be carried or shall be manufactured on board unless a shore supply is available. In addition, sufficient inert gas shall be available on the ship to compensate for normal losses during transportation.

.2 The inert gas system on board the ship shall be able to maintain a pressure of at least 0.007 MPa gauge within the containment system at all times. In addition, the inert gas system shall not raise the cargo tank pressure to more than the tank's relief-valve setting.

.3 Where padding is used, similar arrangements for supply of the padding medium shall be made as required for inert gas in 9.1.3.1 and 9.1.3.2.

.4 Means shall be provided for monitoring ullage spaces containing a gas blanket to ensure that the correct atmosphere is being maintained.

.5 Inerting or padding arrangements or both, where used with flammable cargoes, shall be such as to minimize the creation of static electricity during the admission of the inerting medium.

Bilaga

9.1.4 Where drying is used and dry nitrogen is used as the medium, similar arrangements for supply of the drying agent shall be made to those required in 9.1.3. Where drying agents are used as the drying medium on all air inlets to the tank, sufficient medium shall be carried for the duration of the voyage, taking into consideration the diurnal temperature range and the expected humidity.

9.2 Environmental control requirements for individual products

The required types of environmental control for certain products are shown in column h in the table of chapter 17.

Bilaga

Chapter 10 Electrical installations

10.1 General

10.1.1 The provisions of this chapter are applicable to ships carrying cargoes which are inherently, or due to their reaction with other substances, flammable or corrosive to the electrical equipment, and shall be applied in conjunction with applicable electrical requirements of part D of chapter II-1 of SOLAS.

10.1.2.1 Electrical installations shall be such as to minimize the risk of fire and explosion from * flammable products .

10.1.2.2 Where the specific cargo is liable to damage the materials normally used in electrical apparatus, due consideration shall be given to the particular characteristics of the materials chosen for conductors, insulation, metal parts, etc. As far as necessary, these components shall be protected to prevent contact with gases or vapours liable to be encountered.

10.1.3 The Administration shall take appropriate steps to ensure uniformity in the implementation and the application of the provisions of this chapter in respect of electrical installations.

10.1.4 Electrical equipment, cables and wiring shall not be installed in the hazardous locations * unless it conforms with the standards not inferior to those acceptable to the Organization . However, for locations not covered by such standards, electrical equipment, cables and wiring which do not conform to the standards may be installed in hazardous locations based on a risk assessment to the satisfaction of the Administration, to ensure that an equivalent level of safety is assured.

10.1.5 Where electrical equipment is installed in hazardous locations, as permitted in this chapter, it shall be to the satisfaction of the Administration and certified by the relevant authorities recognized by the Administration for operation in the flammable atmosphere concerned, as indicated in column i in the table of chapter 17.

10.1.6 For guidance, indicatio n is given if the flashpoint of a substance is in excess of 60°C. In the case of a heated cargo, carriage conditions might need to be established and the requirements for cargoes having a flashpoint not exceeding 60ºC applied.

10.2 Bonding

Independent cargo tanks shall be electrically bonded to the hull. All gasketed cargo-pipe joints and hose connections shall be electrically bonded.

10.3 Electrical requirements for individual products

Electrical requirements for individual products are shown in column i in the table of chapter 17.

* Reference is made to the recommendations published by the International Electrotechnical Commission, in particular to Publication IEC 60079-1-1: 2002.

Bilaga

Chapter 11 Fire protection and fi re extinction

11.1 Application

11.1.1 The requirements for tankers in SOLAS chapter II-2 shall apply to ships covered by the Code, irrespective of tonnage, including ships of less than 500 tons gross tonnage, except that: .1 regulations 4.5.5, 10.8 and 10.9 shall not apply; .2 regulation 4.5.1.2 (i.e. the requirements for location of the main cargo control station) need not apply; .3 regulations 10.2, 10.4, and 10.5 shall apply as they would apply to cargo ships of 2,000 tons gross tonnage and over; .4 regulation 10.5.6 shall apply to ships of 2,000 gross tonnage and over; .5 the provisions of 11.3 shall apply in lieu of regulation 10.8; .6 the provisions of 11.2 shall apply in lieu of regulation 10.9; .7 regulation 4.5.10 shall apply to ships of 500 gross tonage and over, replacing “hydrocarbon gases” by “fl ammable vapours” in the regulation; and .8 regulations 13.3.4 and 13.4.3 shall apply to ships of 500 gross tonnage and over. 11.1.2 Notwithstanding the provisions of 11.1.1, ships engaged solely in the carriage of products which are non-fl ammable (entry NF in column i of the table of minimum requirements) need not comply with requirements for tankers specifi ed in SOLAS chapter II-2, provided that they comply with the requirements for cargo ships of that chapter, except that regulation 10.7 need not apply to such ships and 11.2 and 11.3, hereunder, need not apply. 11.1.3 For ships engaged solely in the carriage of products with a fl ashpoint of 60°C and above (entry “Yes” in column i of the table of minimum requirements), the requirements of SOLAS chapter II-2 may apply as specifi ed in regulation II-2/1.6.4 in lieu of the provisions of this chapter. 11.1.4 In lieu of the provisions of SOLAS regulation II-2/1.6.7, the requirements of regulations II-2/4.5.10.1.1 and II-2/4.5.10.1.4 shall apply and a system for continuous monitoring of the concentration of fl ammable vapours shall be fi tted on ships of 500 gross tonnage and over which were constructed before 1 January 2009 by the date of the fi rst scheduled drydocking after 1 January 2009, but not later than 1 January 2012. Sampling points or detector heads should be located in suitable positions in order that potentially dangerous leakages are readily detected. When the fl ammable vapour concentration reaches a pre-set level which shall not be higher than 10% of the lower fl ammable limit, a continuous audible and visual alarm signal shall be automatically effected in the pump-room and cargo control room to alert personnel to the potential hazard. However, existing monitoring systems already fi tted having a pre-set level not greater than 30% of the lower fl ammable limit may be accepted. Notwithstanding the above provisions, the Administration may exempt ships not engaged on international voyages from those requirements.

Bilaga

11.2 Cargo pump-rooms

11.2.1 The cargo pump-room of any ship shall be provided with a fixed carbon dioxide fire-extinguishing system as specified in SOLAS regulation II-2/10.9.1.1. A notice shall be exhibited at the controls stating that the system is only to be used for fire-extinguishing and not for inerting purposes, due to the electrostatic ignition hazard. The alarms referred to in SOLAS regulation II-2/10.9.1.1.1 shall be safe for use in a flammable cargo vapour/air mixture. For the purpose of this requirement, an extinguishing system shall be provided which would be suitable for machinery spaces. However, the amount of gas carried shall be sufficient to provide a quantity of free gas equal to 45% of the gross volume of the cargo pump-room in all cases.

11.2.2 Cargo pump-rooms of ships which are dedicated to the carriage of a restricted number of cargoes shall be protected by an appropriate fire-extinguishing system approved by the Administration.

11.2.3 If cargoes are to be carried which are not suited to extinguishment by carbon dioxide or equivalent media, the cargo pump-room shall be protected by a fire extinguishing system consisting of either a fixed pressure water spray or high expansion foam system. The International Certificate of Fitness for the Carriage of Dangerous Chemicals in Bulk shall reflect this conditional requirement.

11.3 Cargo area

11.3.1 Every ship shall be provided with a fixed deck foam system in accordance with the requirements of 11.3.2 to 11.3.12.

11.3.2 Only one type of foam concentrate shall be supplied, and it shall be effective for the maximum possible number of cargoes intended to be carried. For other cargoes for which foam is not effective or is incompatible, additional arrangements to the satisfaction of the Administration shall be provided. Regular protein foam shall not be used.

11.3.3 The arrangements for providing foam shall be capable of delivering foam to the entire cargo tanks deck area as well as into any cargo tank, the deck of which is assumed to be ruptured.

11.3.4 The deck foam system shall be capable of simple and rapid operation. The main control station for the system shall be suitably located outside of the cargo area, adjacent to the accommodation spaces and readily accessible and operable in the event of fires in the areas protected.

11.3.5 The rate of supply of foam solution shall be not less than the greatest of the following:

.1 2 l/min per square metre of the cargo tanks deck area, where cargo tanks deck area means the maximum breadth of the ship times the total longitudinal extent of the cargo tank spaces;

.2 20 l/min per square metre of the horizontal sectional area of the single tank having the largest such area;

Bilaga

.3 10 l/min per square metre of the area protected by the largest monitor, such area being entirely forward of the monitor, but not less than 1,250 l/min. For ships less than 4,000 tonnes deadweight, the minimum capacity of the monitor shall be to the satisfaction of the Administration.

11.3.6 Sufficient foam concentrate shall be supplied to ensure at least 30 min of foam generation when using the highest of the solution rates stipulated in 11.3.5.1, 11.3.5.2 and 11.3.5.3.

11.3.7 Foam from the fixed foam system shall be supplied by means of monitors and foam applicators. At least 50% of the foam rate required in 11.3.5.1 or 11.3.5.2 shall be delivered from each monitor. The capacity of any monitor shall be at least 10 l/min of foam solution per square metre of deck area protected by that monitor, such area being entirely forward of the monitor. Such capacity shall be not less than 1,250 l/min. For ships less than 4,000 tonnes deadweight, the minimum capacity of the monitor shall be to the satisfaction of the Administration.

11.3.8 The distance from the monitor to the farthest extremity of the protected area forward of that monitor shall be not more than 75% of the monitor throw in still air conditions.

11.3.9 A monitor and hose connection for a foam applicator shall be situated both port and starboard at the poop front or accommodation spaces facing the cargo area.

11.3.10 Applicators shall be provided for flexibility of action during fire- fighting operations and to cover areas screened from the monitors. The capacity of any applicator shall be not less than 400 l/min and the applicator throw in still air conditions shall be not less than 15 m. The number of foam applicators provided shall be not less than four. The number and disposition of foam main outlets shall be such that foam from at least two applicators can be directed to any part of the cargo tanks deck area.

11.3.11 Valves shall be provided in the foam main, and in the fire main where this is an integral part of the deck foam system, immediately forward of any monitor position to isolate damaged sections of those mains.

11.3.12 Operation of a deck foam system at its required output shall permit the simultaneous use of the minimum required number of jets of water at the required pressure from the fire main.

11.3.13 Ships which are dedicated to the carriage of a restricted number of cargoes shall be protected by alternative provisions to the satisfaction of the Administration when they are just as effective for the products concerned as the deck foam system required for the generality of flammable cargoes.

11.3.14 Suitable portable fire-extinguishing equipment for the products to be carried shall be provided and kept in good operating order.

11.3.15 Where flammable cargoes are to be carried, all sources of ignition shall be excluded from hazardous locations unless such sources conform with 10.1.4.

11.3.16 Ships fitted with bow or stern loading and unloading arrangements shall be provided with one additional foam monitor meeting the requirements of 11.3.7 and one additional applicator meeting the requirements of 11.3.10. The additional monitor shall be located to protect the bow or stern loading and unloading arrangements. The area of the cargo line forward or aft of the cargo area shall be protected by the above-mentioned applicator.

Bilaga

11.4 Special requirements

All fire-extinguishing media determined to be effective for each product are listed in column l in the table of chapter 17.

Bilaga

Chapter 12 Mechanical ventilation in the cargo area

For ships to which the Code applies, the requirements of this chapter replace the requirements of SOLAS regulations II-2/4.5.2.6 and 4.5.4.

However, for products addressed under paragraphs 11.1.2 and 11.1.3, except acids and products for which paragraph 15.17 applies, SOLAS regulations II-2/4.5.2.6 and 4.5.4 may apply in lieu of the provisions of this chapter.

12.1 Spaces normally entered duri ng cargo-handling operations

12.1.1 Cargo pump-rooms and other enclosed spaces which contain cargo-handling equipment and similar spaces in which work is performed on the cargo shall be fitted with mechanical ventilation systems, capable of being controlled from outside such spaces.

12.1.2 Provision shall be made to ventilate such spaces prior to entering the compartment and operating the equipment and a warning notice requiring the use of such ventilation shall be placed outside the compartment.

12.1.3 Mechanical ventilation inlets and outlets shall be arranged to ensure sufficient air movement through the space to avoid the accumulation of toxic or flammable vapours or both (taking into account their vapour densities) and to ensure sufficient oxygen to provide a safe working environment, but in no case shall the ventilation system have a capacity of less than 30 changes of air per hour, based upon the total volume of the space. For certain products, increased ventilation rates for cargo pump-rooms are prescribed in 15.17.

12.1.4 Ventilation systems shall be permanent and shall normally be of the extraction type. Extraction from above and below the floor plates shall be possible. In rooms housing motors driving cargo pumps, the ventilation shall be of the positive-pressure type.

12.1.5 Ventilation exhaust ducts from spaces within the cargo area shall discharge upwards in locations at least 10 m in the horizontal direction from ventilation intakes and openings to accommodation, service and machinery spaces and control stations and other spaces outside the cargo area.

12.1.6 Ventilation intakes shall be so arranged as to minimize the possibility of recycling hazardous vapours from any ventilation discharge opening.

12.1.7 Ventilation ducts shall not be led through accommodation, service and machinery spaces or other similar spaces.

12.1.8 Electric motors driving fans shall be placed outside the ventilation ducts if the carriage of flammable products is intended. Ventilation fans and fan ducts, in way of fans only, for hazardous locations referred to in chapter 10 shall be of non-sparking construction, defined as:

.1 impellers or housing of non-metallic construction, due regard being paid to the elimination of static electricity;

.2 impellers and housing of non-ferrous materials;

Bilaga

.3 impellers and housing of austenitic stainless steel; and

.4 ferrous impellers and housing with not less than 13 mm design tip clearance.

Any combination of an aluminium or a magnesium alloy fixed or rotating component and a ferrous fixed or rotating component, regardless of tip clearance, is considered a sparking hazard and shall not be used in these places.

12.1.9 Sufficient spare parts shall be carried for each type of fan on board required by this chapter.

12.1.10 Protection screens of not more than 13 mm square mesh shall be fitted in outside openings of ventilation ducts.

12.2 Pump-rooms and other enclosed spaces normally entered

Pump-rooms and other enclosed spaces normally entered which are not covered by 12.1.1 shall be fitted with mechanical ventilation systems, capable of being controlled from outside such spaces and complying with the requirements of 12.1.3, except that the capacity shall not be less than 20 changes of air per hour, based upon the total volume of the space. Provision shall be made to ventilate such spaces prior to personnel entering.

12.3 Spaces not normally entered

Double bottoms, cofferdams, duct keels, pipe tunnels, hold spaces and other spaces where cargo may accumulate shall be capable of being ventilated to ensure a safe environment when entry into the spaces is necessary. Where a permanent ventilation system is not provided for such spaces, approved means of portable mechanical ventilation shall be provided. Where necessary, owing to the arrangement of spaces, for instance hold spaces, essential ducting for ventilation shall be permanently installed. For permanent installations the capacity of eight air changes per hour shall be provided and for portable systems the capacity of 16 air changes per hour. Fans or blowers shall be clear of personnel access openings, and shall comply with 12.1.8.

Bilaga

Chapter 13 Instrumentation

13.1 Gauging

13.1.1 Cargo tanks shall be fitted with one of the following types of gauging devices:

.1 Open device: which makes use of an opening in the tanks and may expose the gauger to the cargo or its vapour. An example of this is the ullage opening.

.2 Restricted device: which penetrates the tank and which, when in use, permits a small quantity of cargo vapour or liquid to be exposed to the atmosphere. When not in use, the device is completely closed. The design shall ensure that no dangerous escape of tank contents (liquid or spray) can take place in opening the device.

.3 Closed device: which penetrates the tank, but which is part of a closed system and keeps tank contents from being released. Examples are the float-type systems, electronic probe, magnetic probe and protected sight-glass. Alternatively, an indirect device which does not penetrate the tank shell and which is independent of the tank may be used. Examples are weighing of cargo, pipe flow meter.

13.1.2 Gauging devices shall be independent of the equipment required under 15.19.

13.1.3 Open gauging and restricted gauging shall be allowed only where:

.1 open venting is allowed by the Code; or

.2 means are provided for relieving tank pressure before the gauge is operated.

13.1.4 Types of gauging for individual products are shown in column j in the table of chapter 17.

13.2 Vapour detection

13.2.1 Ships carrying toxic or flammable products or both shall be equipped with at least two instruments designed and calibrated for testing for the specific vapours in question. If such instruments are not capable of testing for both toxic concentrations and flammable concentrations, then two separate sets of instruments shall be provided.

13.2.2 Vapour-detection instruments may be portable or fixed. If a fixed system is installed, at least one portable instrument shall be provided.

13.2.3 When toxic-vapour-detection equipment is not available for some products which require such detection, as indicated in column k in the table of chapter 17, the Administration may exempt the ship from the requirement, provided an appropriate entry is made on the International Certificate of Fitness for the Carriage of Dangerous Chemicals in Bulk. When granting such an exemption, the Administration shall recognize the necessity for additional breathing-air supply and an entry shall be made on the International Certificate of Fitness for the Carriage of Dangerous Chemicals in Bulk drawing attention to the provisions of 14.2.4 and 16.4.2.2.

Bilaga

13.2.4 Vapour-detection requirements for individual products are shown in column k in the table of chapter 17.

Bilaga

Chapter 14 Personnel protection

14.1 Protective equipment

14.1.1 For the protection of crew members who are engaged in loading and discharging operations, the ship shall have on board suitable protective equipment consisting of large aprons, special gloves with long sleeves, suitable footwear, coveralls of chemical-resistant material, and tight-fitting goggles or face shields or both. The protective clothing and equipment shall cover all skin so that no part of the body is unprotected. 14.1.2 Work clothes and protective equipment shall be kept in easily accessible places and in special lockers. Such equipment shall not be kept within accommodation spaces, with the exception of new, unused equipment and equipment which has not been used since undergoing a thorough cleaning process. The Administration may, however, approve storage rooms for such equipment within accommodation spaces if adequately segregated from living spaces such as cabins, passageways, dining rooms, bathrooms, etc. 14.1.3 Protective equipment shall be used in any operation, which may entail danger to personnel.

14.2 Safety equipment

14.2.1 Ships carrying cargoes for which 15.12, 15.12.1 or 15.12.3 is listed in column o in the table of chapter 17 shall have on board sufficient but not less than three complete sets of safety equipment, each permitting personnel to enter a gas-filled compartment and perform work there for at least 20 min. Such equipment shall be in addition to that required by SOLAS regulation II-2/10.10. 14.2.2 One complete set of safety equipment shall consist of: .1 one self-contained air-breathing apparatus (not using stored oxygen); .2 protective clothing, boots, gloves and tight-fitting goggles; .3 fireproof lifeline with belt resistant to the cargoes carried; and .4 explosion-proof lamp. 14.2.3 For the safety equipment required in 14.2.1, all ships shall carry either: .1 one set of fully charged spare air bottles for each breathing apparatus; .2 a special air compressor suitable for the supply of high-pressure air of the required purity; .3 a charging manifold capable of dealing with sufficient spare air bottles for the breathing apparatus; or

Bilaga

.4 fully charged spare air bottles with a total free air capacity of at least 6,000 l for each breathing apparatus on board in excess of the requirements of SOLAS regulation II-2/10.10.

14.2.4 A cargo pump-room on ships carrying cargoes which are subject to the requirements of 15.18 or cargoes for which in column k in the table of chapter 17 toxic-vapour-detection equipment is required but is not available shall have either:

.1 a low-pressure line system with hose connections suitable for use with the breathing apparatus required by 14.2.1. This system shall provide sufficient high-pressure air capacity to supply, through pressure-reduction devices, enough low-pressure air to enable two men to work in a gas-dangerous space for at least 1 h without using the air bottles of the breathing apparatus. Means shall be provided for recharging the fixed air bottles and the breathing apparatus air bottles from a special air compressor suitable for the supply of high-pressure air of the required purity; or

.2 an equivalent quantity of spare bottled air in lieu of the low-pressure air line.

14.2.5 At least one set of safety equipment as required by 14.2.2 shall be kept in a suitable clearly marked locker in a readily accessible place near the cargo pump-room. The other sets of safety equipment shall also be kept in suitable, clearly marked, easily accessible places.

14.2.6 The breathing apparatus shall be inspected at least once a month by a responsible officer, and the inspection recorded in the ship's log-book. The equipment shall be inspected and tested by an expert at least once a year.

14.3 Emergency equipment

14.3.1 Ships carrying cargoes, for which “Yes” is indicated in column n of chapter 17, shall be provided with suitable respiratory and eye protection sufficient for every person on board for emergency escape purposes, subject to the following:

.1 filter-type respiratory protection is unacceptable;

.2 self-contained breathing apparatus shall have at least a duration of service of 15 min;

.3 emergency escape respiratory protection shall not be used for fire-fighting or cargo-handling purposes and shall be marked to that effect.

14.3.2 The ship shall have on board medical first-aid equipment, including oxygen resuscitation equipment and antidotes for cargoes to be carried, based on the guidelines developed by the * Organization .

14.3.3 A stretcher which is suitable for hoisting an injured person up from spaces such as the cargo pump-room shall be placed in a readily accessible location.

* Reference is made to the Medical First Aid Guide for Use in Accidents Involving Dangerous Goods (MFAG), which provides advice on the treatment of casualties in accordance with the symptoms exhibited as well as equipment and antidotes that may be appropriate for treating the casualty.

Bilaga

14.3.4 Suitably marked decontamination showers and an eyewash shall be available on deck in convenient locations. The showers and eyewash shall be operable in all ambient conditions.

Bilaga

Chapter 15 Special requirements

15.1 General

15.1.1 The provisions of this chapter are applicable where specific reference is made in column o in the table of chapter 17. These requirements are additional to the general requirements of the Code.

15.2 Ammonium nitrate solution (93% or less)

15.2.1 The ammonium nitrate solution shall contain at least 7% by weight of water. The acidity (pH) of the cargo when diluted with ten parts of water to one part of cargo by weight shall be between 5.0 and 7.0. The solution shall not contain more than 10 ppm chloride ions, 10 ppm ferric ions and shall be free of other contaminants.

15.2.2 Tanks and equipment for ammonium nitrate solution shall be independent of tanks and equipment containing other cargoes or combustible products. Equipment which may, in service or when defective, release combustible products into the cargo (e.g. lubricants), shall not be used. Tanks shall not be used for seawater ballast.

15.2.3 Except where expressly approved by the Administration, ammonium nitrate solutions shall not be transported in tanks which have previously contained other cargoes unless tanks and associated equipment have been cleaned to the satisfaction of the Administration.

15.2.4 The temperature of the heat-exchanging medium in the tank heating system shall not exceed 160°C. The heating system shall be provided with a control system to keep the cargo at a bulk mean temperature of 140°C. High-temperature alarms at 145°C and 150°C and a low-temperature alarm at 125°C shall be provided. Where the temperature of the heatexchanging medium exceeds 160°C, an alarm shall also be given. Temperature alarms and controls shall be located on the navigating bridge.

15.2.5 If the bulk mean cargo temperature reaches 145°C, a cargo sample shall be diluted with ten parts of distilled or demineralized water to one part of cargo by weight and the pH shall be determined by means of a narrow-range indicator paper or stick. Acidity measurements shall then be taken every 24 hours. If the pH is found to be below 4.2, ammonia gas shall be injected into the cargo until the pH of 5.0 is reached.

15.2.6 A fixed installation shall be provided to inject ammonia gas into the cargo. Controls for this system shall be located on the navigation bridge. For this purpose, 300 kg of ammonia per 1,000 tonnes of ammonium nitrate solution shall be available on board.

15.2.7 Cargo pumps shall be of the centrifugal deepwell type or of the centrifugal type with water-flushed seals.

15.2.8 Vent piping shall be fitted with approved weatherhoods to prevent clogging. Such weatherhoods shall be accessible for inspection and cleaning.

Bilaga

15.2.9 Hot work on tanks, piping and equipment which have been in contact with ammonium nitrate solution shall only be done after all traces of ammonium nitrate have been removed, inside as well as outside.

15.3 Carbon disulphide

Carbon disulphide may be carried either under a water pad or under a suitable inert gas pad as specified in the following paragraphs.

Carriage under water pad

15.3.1 Provision shall be made to maintain a water pad in the cargo tank during loading, unloading and transit. In addition, an inert-gas pad shall be maintained in the ullage space during transit. 15.3.2 All openings shall be in the top of the tank, above the deck. 15.3.3 Loading lines shall terminate near the bottom of the tank. 15.3.4 A standard ullage opening shall be provided for emergency sounding. 15.3.5 Cargo piping and vent lines shall be independent of piping and vent lines used for other cargo. 15.3.6 Pumps may be used for discharging cargo, provided they are of the deepwell or hydraulically driven submersible types. The means of driving a deepwell pump shall no t present a source of ignition for carbon disulphide and shall not employ equipment that may exceed a temperature of 80°C. 15.3.7 If a cargo discharge pump is used, it shall be inserted through a cylindrical well extending from the tank top to a point near the tank bottom. A water pad shall be formed in this well before attempting pump removal unless the tank has been certified as gas-free. 15.3.8 Water or inert-gas displacement may be used for discharging cargo, provided the cargo system is designed for the expected pressure and temperature. 15.3.9 Safety relief valves shall be of stainless steel construction. 15.3.10 Because of its low ignition temperature and close clearances required to arrest its flame propagation, only intrinsically safe systems and circuits are permitted in the hazardous locations.

Carriage under suitable inert gas pad

15.3.11 Carbon disulphide shall be carried in independent tanks with a design pressure of not less than 0.06 MPa gauge. 15.3.12 All openings shall be located on the top of the tank, above the deck. 15.3.13 Gaskets used in the containment system shall be of a material which does not react with, or dissolve in, carbon disulphide.

Bilaga

15.3.14 Threaded joints shall not be permitted in the cargo containment system, including the vapour lines.

15.3.15 Prior to loading, the tank(s) shall be inerted with suitable inert gas until the oxygen level is 2% by volume or lower. Means shall be provided to automatically maintain a positive pressure in the tank using suitable inert gas during loading, transport and discharge. The system shall be able to maintain this positive pressure between 0.01 and 0.02 MPa, and shall be remotely monitored and fitted with over/underpressure alarms.

15.3.16 Hold spaces surrounding an independent tank carrying carbon disulphide shall be inerted by a suitable inert gas until the oxygen level is 2% or less. Means shall be provided to monitor and maintain this condition throughout the voyage. Means shall also be provided to sample these spaces for carbon disulphide vapour.

15.3.17 Carbon disulphide shall be loaded, transported and discharged in such a manner that venting to the atmosphere does not occur. If carbon disulphide vapour is returned to shore during loading or to the ship during discharge, the vapour return system shall be independent of all other containment systems.

15.3.18 Carbon disulphide shall be discharged only by submerged deepwell pumps or by a suitable inert gas displacement. The submerged deepwell pumps shall be operated in a way that prevents heat build-up in the pump. The pump shall also be equipped with a temperature sensor in the pump housing with remote readout and alarm in the cargo control room. The alarm shall be set at 80°C. The pump shall also be fitted with an automatic shut-down device to be activated if the tank pressure falls below atmospheric pressure during the discharge.

15.3.19 Air shall not be allowed to enter the cargo tank, cargo pump or lines while carbon disulphide is contained in the system.

15.3.20 No other cargo handling, tank cleaning or deballasting shall take place concurrent with loading or discharge of carbon disulphide.

15.3.21 A water spray system of sufficient capacity shall be provided to blanket effectively the area surrounding the loading manifold, the exposed deck piping associated with product handling and the tank domes. The arrangement of piping and nozzles shall be such as to give an uniform 2 distribution rate of 10 l/m /min. Remote manual operation shall be arranged suc h that remote starting of pumps supplying the water-spray system and remote operation of any normally closed valves in the system can be carried out from a suitable location outside the cargo area adjacent to the accommodation spaces and readily accessible and operable in the event of fire in the areas protected. The water-spray system shall be capable of both local and remote manual operation, and the arrangement shall ensure that any spilled cargo is washed away. Additionally, a water hose with pressure to the nozzle when atmospheric temperature permits, shall be connected ready for immediate use during loading and unloading operations.

15.3.22 No cargo tanks shall be more than 98% liquid-full at the reference temperature (R).

Bilaga

15.3.23 The maximum volume (VL) of cargo to be loaded in a tank shall be:

R VL = 0.98 V L where:

V = volume of the tank R = density of cargo at the reference temperature (R) L = density of cargo at the loading temperature R = reference temperature

15.3.24 The maximum allowable tank filling limits for each cargo tank shall be indicated for each loading temperature which may be applied, and for the applicable maximum reference temperature, on a list approved by the Administration. A copy of the list shall be permanently kept on board by the master.

15.3.25 Zones on open deck, or semi-enclosed spaces on open deck within three metres of a tank outlet, gas or vapour outlet, cargo pipe flange or cargo valve of a tank certified to carry carbon disulphide, shall comply with the electrical equipment requirements specified for carbon disulphide in column i, chapter 17. Also, within the specified zone, no other heat sources, like steam piping with surface temperatures in excess of 80°C shall be allowed.

15.3.26 Means shall be provided to ullage and sample the cargo without opening the tank or disturbing the positive suitable inert gas blanket.

15.3.27 The product shall be transported only in accordance with a cargo handling plan that has been approved by the Administration. Cargo handling plans shall show the entire cargo piping system. A copy of the approved cargo handling plan shall be available on board. The International Certificate of Fitness for the Carriage of Dangerous Chemicals in Bulk shall be endorsed to include reference to the approved cargo handling plan.

15.4 Diethyl ether

15.4.1 Unless inerted, natural ventilation shall be provided for the voids around the cargo tanks while the vessel is under way. If a mechanical ventilation system is installed, all blowers shall be of non-sparking construction. Mechanical ventilation equipment shall not be located in the void spaces surrounding the cargo tanks.

15.4.2 Pressure-relief-valve settings shall not be less than 0.02 MPa gauge for gravity tanks.

15.4.3 Inert-gas displacement may be used for discharging cargo from pressure tanks provided the cargo system is designed for the expected pressure.

15.4.4 In view of the fire hazard, provision shall be made to avoid any ignition source or heat generation or both in the cargo area.

15.4.5 Pumps may be used for discharging cargo, provided that they are of a type designed to avoid liquid pressure against the shaft gland or are of a hydraulically operated submerged type and are suitable for use with the cargo.

Bilaga

15.4.6 Provision shall be made to maintain the inert-gas pad in the cargo tank during loading, unloading and transit.

15.5 Hydrogen peroxide solutions

15.5.1 Hydrogen peroxide solutions over 60% but not over 70% by mass

15.5.1.1 Hydrogen peroxide solutions over 60% but not over 70% by mass shall be carried in dedicated ships only and no other cargoes shall be carried.

15.5.1.2 Cargo tanks and associated equipment shall be either pure aluminium (99.5%) or solid stainless steel (304L, 316, 316L or 316Ti), and passivated in accordance with approved procedures. Aluminium shall not be used for piping on deck. All nonmetallic materials of construction for the containment system shall neither be attacked by hydrogen peroxide nor contribute to its decomposition.

15.5.1.3 Pump-rooms shall not be used for cargo-transfer operations.

15.5.1.4 Cargo tanks shall be separated by cofferdams from oil fuel tanks or any other space containing flammable or combustible materials.

15.5.3.5 Tank and equipment are washed again with clean water (quality as above) and dried, using filtered, oil-free air.

15.5.3.6 The atmosphere in the tank shall be sampled and investigated for the presence of organic vapours and oxygen concentration.

15.5.3.7 The tank shall be checked again by visual inspection for residues of the previous cargo, scale and rust as well as for any smell of the previous cargo.

15.5.3.8 If inspection or measurements indicate the presence of residues of the previous cargo or its vapours, actions described in paragraphs 15.5.3.3 to 15.5.3.5 shall be repeated.

15.5.3.9 Tank and equipment made from stainless steel which have contained other cargoes than hydrogen peroxide or which have been under repair shall be cleaned and passivated, regardless of any previous passivation, according to the following procedure:

.1 New welds and other repaired parts shall be cleaned and finished using stainless steel wire brush, chisel, sandpaper or buff. Rough surfaces shall be given a smooth finish. A final polishing is necessary.

.2 Fatty and oily residues shall be removed by the use of appropriate organic solvents or detergent solutions in water. The use of chlorine-containing compounds shall be avoided as they can seriously interfere with passivation.

.3 The residues of the degreasing agent shall be removed, followed by a washing with water.

Bilaga

.4 In the next step, scale and rust shall be removed by the application of acid (e.g. a mixture of nitric and hydrofluoric acids), followed again by a washing with clean water.

.5 All the metal surfaces which can come into contact with hydrogen peroxide shall be passivated by the application of nitric acid of a concentration between 10 and 35% by mass. The nitric acid must be free from heavy metals, other oxidizing agents or hydrogen fluoride. The passivation process shall continue for 8 to 24 h, depending upon the concentration of acid, the ambient temperature and other factors. During this time a continuous contact between the surfaces to be passivated and the nitric acid shall be ensured. In the case of large surfaces this may be achieved by recirculating the acid. Hydrogen gas may be evolved in the passivation process, leading to the presence of an explosive atmosphere in the tanks. Therefore, appropriate measures must be taken to avoid the build-up or the ignition of such an atmosphere.

.6 After passivation the surfaces shall be thoroughly washed with clean filtered water. The washing process shall be repeated until the effluent water has the same pH value as the incoming water.

.7 Surfaces treated according to the above steps may cause some decomposition when coming into contact with hydrogen peroxide for the first time. This decomposition will cease after a short time (usually within two or three days). Therefore an additional flushing with hydrogen peroxide for a period of at least two days is recommended.

.8 Only degreasing agents and acid cleaning agents which have been recommended for this purpose by the manufacturer of the hydrogen peroxide shall be used in the process.

15.5.3.10 Tanks and equipment made from aluminium and which have contained cargoes other than hydrogen peroxide, or which have been under repair, shall be cleaned and passivated. The following is an example of a recommended procedure:

.1 The tank shall be washed with a solution of a sulphonated detergent in hot water, followed by a washing with water.

.2 The surface shall then be treated for 15 to 20 min with a solution of sodium hydroxide of a concentration of 7% by mass or treated for a longer period with a less concentrated solution (e.g. for 12 h with 0.4 to 0.5% sodium hydroxide). To prevent excessive corrosion at the bottom of the tank when treating with more concentrated solutions of sodium hydroxide, water shall be added continuously to dilute the sodium hydroxide solution which collects there.

.3 The tank shall be thoroughly washed with clean, filtered water. As soon as possible after washing, the surface shall be passivated by the application of nitric acid of a concentration between 30 and 35% by mass. The passivation process shall continue for 16 to 24 h. During this time a continuous contact between the surfaces to be passivated and the nitric acid shall be ensured.

Bilaga

.4 After passivation the surfaces shall be thoroughly washed with clean, filtered water. The washing process shall be repeated until the effluent water has the same pH value as the incoming water.

.5 A visual inspection shall be made to ensure that all surfaces have been treated. It is recommended that an additional flushing is carried out for a minimum of 24 h with dilute hydrogen peroxide solution of a concentration approximately 3% by mass.

15.5.3.11 The concentration and stability of the hydrogen peroxide solution to be loaded shall be determined.

15.5.3.12 The hydrogen peroxide is loaded under intermittent visual supervision of the interior of the tank from an appropriate opening.

15.5.3.13 If substantial bubbling is observed which does not disappear within 15 min after the completion of loading, the contents of the tank shall be unloaded and disposed of in an environmentally safe manner. The tank and equipment shall then be repassivated as described above.

15.5.3.14 The concentration and stability of the hydrogen peroxide solution shall be determined again. If the same values are obtained within the limits of error as in paragraph 15.5.3.10, the tank is considered to be properly passivated and the cargo ready for shipment.

15.5.3.15 Actions described in paragraphs 15.5.3.2 to 15.5.3.8 shall be carried out under the supervision of the master or shipper. Actions described in paragraphs 15.5.3.9 to 15.5.3.15 shall be carried out under the on-site supervision and responsibility of a representative of the hydrogen peroxide manufacturer or under supervision and responsibility of another person familiar with the safety-relevant properties of hydrogen peroxide.

15.5.3.16 The following procedure shall be applied when tanks having contained hydrogen peroxide solution are to be used for other products (unless otherwise specified, all steps apply to the tanks and to all associated equipment having been in contact with hydrogen peroxide):

.1 Hydrogen peroxide cargo residue shall be drained as completely as possible from tanks and equipment.

.2 Tanks and equipment shall be rinsed with clean water, and subsequently thoroughly washed with clean water.

.3 The interior of the tank shall be dried and inspected for any residues.

Steps .1 to .3, in 15.5.3.16, shall be carried out under the supervision of the master or the shipper. Step .3 in paragraph 15.5.3.16 shall be carried out by a person familiar with the safety-relevant properties of the chemical to be transported and of hydrogen peroxide.

SPECIAL CAUTIONS : 1 Hydrogen peroxide decomposition may enrich the atmosphere with oxygen and appropriate precautions shall be observed.

2 Hydrogen gas may be evolved in the passivation processes described in paragraphs 15.5.3.9.5, 15.5.3.10.2 and

Bilaga

15.5.3.10.4, leading to the presence of an explosive atmosphere in the tank. Therefore, appropriate measures must be taken to avoid the build-up or the ignition of such an atmosphere.

15.6 Motor fuel anti-knock compounds (containing lead alkyls)

15.6.1 Tanks used for these cargoes shall not be used for the transportation of any other cargo except those commodities to be used in the manufacture of motor fuel anti-knock compounds containing lead alkyls.

15.6.2 If a cargo pump-room is located on deck level according to 15.18, the ventilation arrangements shall be in compliance with 15.17.

15.6.3 Entry into cargo tanks used for the transportation of these cargoes is not permitted unless approved by the Administration.

15.6.4 Air analysis shall be made for lead content to determine if the atmosphere is satisfactory prior to allowing personnel to enter the cargo pump-room or void spaces surrounding the cargo tank.

15.7 Phosphorus, yellow or white

15.7.1 Phosphorus shall, at all times, be loaded, carried and discharged under a water pad of 760 mm minimum depth. During discharge operations, arrangements shall be made to ensure that water occupies the volume of phosphorus discharged. Any water discharged from a phosphorus tank shall be returned only to a shore installation.

15.7.2 Tanks shall be designed and tested to a minimum equivalent water head of 2.4 m above the top of the tank, under designed loading conditions, taking into account the depth, relative density and method of loading and discharge of the phosphorus.

15.7.3 Tanks shall be so designed as to minimize the interfacial area between the liquid phosphorus and its water pad.

15.7.4 A minimum ullage space of 1% shall be maintained above the water pad. The ullage space shall be filled with inert gas or naturally ventilated by two cowled standpipes terminating at different heights but at least 6 m above the deck and at least 2 m above the pump-house top.

15.7.5 All openings shall be at the top of cargo tanks, and fittings and joints attached thereto shall be of materials resistant to phosphorus pentoxide.

15.7.6 Phosphorus shall be loaded at a temperature not exceeding 60°C.

15.7.7 Tank heating arrangements shall be external to tanks and have a suitable method of temperature control to ensure that the temperature of the phosphorus does not exceed 60°C. A high-temperature alarm shall be fitted.

15.7.8 A water drench system acceptable to the Administration shall be installed in all void spaces surrounding the tanks. The system shall operate automatically in the event of an escape of phosphorus.

Bilaga

15.7.9 Void spaces referred to in 15.7.8 shall be provided with effective means of mechanical ventilation which shall be capable of being sealed off quickly in an emergency. 15.7.10 Loading and discharge of phosphorus shall be governed by a central system on the ship which, in addition to incorporating high-level alarms, shall ensure that no overflow of tanks is possible and that such operations can be stopped quickly in an emergency from either ship or shore. 15.7.11 During cargo transfer, a water hose on deck shall be connected to a water supply and kept flowing throughout the operation so that any spillage of phosphorus may be washed down with water immediately. 15.7.12 Ship-to-shore loading and discharge connections shall be of a type approved by the Administration.

15.8 Propylene oxide or ethylene oxide/propylene oxide mixtures with an ethylene oxide content of not more than 30% by mass

15.8.1 Products transported under the provisions of this section shall be acetylene-free. 15.8.2 Unless cargo tanks are properly cleaned, these products shall not be carried in tanks which have contained as one of the three previous cargoes any products known to catalyse polymerization, such as: .1 mineral acids (e.g. sulphuric, hydrochloric, nitric); .2 carboxylic acids and anhydrides (e.g. formic, acetic); .3 halogenated carboxylic acids (e.g. chloracetic); .4 sulphonic acids (e.g. benzenesulphonic); .5 caustic alkalis (e.g. sodium hydroxide, potassium hydroxide); .6 ammonia and ammonia solutions; .7 amines and amine solutions; and .8 oxidizing substances. 15.8.3 Before loading, tanks shall be thoroughly and effectively cleaned, to remove all traces of previous cargoes from tanks and associated pipework, except where the immediately prior cargo has been propylene oxide or ethylene oxide/propylene oxide mixtures. Particular care shall be taken in the case of ammonia in tanks made of steel other than stainless steel. 15.8.4 In all cases, the effectiveness of cleaning procedures for tanks and associated pipework shall be checked by suitable testing or inspection, to ascertain that no traces of acidic or alkaline materials remain that might create a hazardous situation in the presence of these products. 15.8.5 Tanks shall be entered and inspected prior to each initial loading of these products to ensure freedom from contamination, heavy rust deposits and visible structural defects. When

Bilaga

cargo tanks are in continuous service for these products, such inspections shall be performed at intervals of not more than two years.

15.8.6 Tanks for the carriage of these products shall be of steel or stainless steel construction.

15.8.7 Tanks for the carriage of these products may be used for other cargoes after thorough cleaning of tanks and associated pipework systems by washing or purging.

15.8.8 All valves, flanges, fittings and accessory equipment shall be of a type suitable for use with the products and shall be constructed of steel or stainless steel in accordance with recognized standards. Discs or disc faces, seats and other wearing parts of valves shall be made of stainless steel containing not less than 11% chromium.

15.8.9 Gaskets shall be constructed of materials which do not react with, dissolve in, or lower the autoignition temperature of these products and which are fire-resistant and possess adequate mechanical behaviour. The surface presented to the cargo shall be polytetrafluoroethylene (PTFE), or materials giving a similar degree of safety by their inertness. Spirally wound stainless steel, with a filler of PTFE or similar fluorinated polymer, may be accepted.

15.8.10 Insulation and packing, if used, shall be of a material which does not react with, dissolve in, or lower the autoignition temperature of these products.

15.8.11 The following materials are generally found unsatisfactory for gaskets, packing and similar uses in containment systems for these products and would require testing before being approved by the Administration:

.1 neoprene or natural rubber, if it comes into contact with the products.

.2 asbestos, or binders used with asbestos.

.3 materials containing oxides of magnesium, such as mineral wools.

15.8.12 Threaded joints shall not be permitted in the cargo liquid and vapour lines.

15.8.13 Filling and discharge piping shall extend to within 100 mm of the bottom of the tank or any sump pit.

15.8.14.1 The containment system for a tank containing these products shall have a valved vapour-return connection.

15.8.14.2 The products shall be loaded and discharged in such a manner that venting of the tanks to atmosphere does not occur. If vapour return to shore is used during tank loading, the vapourreturn system connected to a containment system for the product shall be independent of all other containment systems.

15.8.14.3 During discharge operations, the pressure in the cargo tank must be maintained above 0.007 MPa gauge.

15.8.15 The cargo may be discharged only by deepwell pumps, hydraulically operated submerged pumps, or inert-gas displacement. Each cargo pump shall be arranged to ensure that the product does not heat significantly if the discharge line from the pump is shut off or otherwise blocked.

Bilaga

15.8.16 Tanks carrying these products shall be vented independently of tanks carrying other products. Facilities shall be provided for sampling the tank contents without opening the tank to atmosphere.

15.8.17 Cargo hoses used for transfer of these products shall be marked “FOR ALKYLENE OXIDE TRANSFER ONLY”.

15.8.18 Cargo tanks, void spaces and other enclosed spaces adjacent to an integral gravity cargo tank carrying propylene oxide shall either contain a compatible cargo (those cargoes specified in 15.8.2 are examples of substances considered incompatible) or be inerted by injection of a suitable inert gas. Any hold space in which an independent cargo tank is located shall be inerted. Such inerted spaces and tanks shall be monitored for these products and oxygen. The oxygen content of these spaces shall be maintained below 2%. Portable sampling equipment is satisfactory.

15.8.19 In no case shall air be allowed to enter the cargo pump or piping system while these products are contained within the system.

15.8.20 Prior to disconnecting shore-lines, the pressure in liquid and vapour lines shall be relieved through suitable valves installed at the loading header. Liquid and vapour from these lines shall not be discharged to atmosphere.

15.8.21 Propylene oxide may be carried in pressure tanks or in independent or integral gravity tanks. Ethylene oxide/propylene oxide mixtures shall be carried in independent gravity tanks or pressure tanks. Tanks shall be designed for the maximum pressure expected to be encountered during loading, conveying and discharging cargo.

15.8.22.1 Tanks for the carriage of propylene oxide with a design pressure less than 0.06 MPa gauge and tanks for the carriage of ethylene oxide/propylene oxide mixtures with a design pressure of less than 0.12 MPa gauge shall have a cooling system to maintain the cargo below the reference temperature.

15.8.22.2 The refrigeration requirement for tanks with a design pressure less than 0.06 MPa gauge may be waived by the Administration for ships operating in restricted areas or on voyages of restricted duration, and account may be taken in such cases of any insulation of the tanks. The area and times of year for which such carriage would be permitted shall be included in the conditions of carriage of the International Certificate of Fitness for the Carriage of Dangerous Chemicals in Bulk.

15.8.23.1 Any cooling system shall maintain the liquid temperature below the boiling temperature at the containment pressure. At least two complete cooling plants, automatically regulated by variations within the tanks, shall be provided. Each cooling plant shall be complete with the necessary auxiliaries for proper operation. The control system shall also be capable of being manually operated. An alarm shall be provided to indicate malfunctioning of the temperature controls. The capacity of each cooling system shall be sufficient to maintain the temperature of the liquid cargo below the reference temperature of the system.

15.8.23.2 An alternative arrangement may consist of three cooling plants, any two of which shall be sufficient to maintain the liquid temperature below the reference temperature.

Bilaga

15.8.23.3 Cooling media which are separated from the products by a single wall only shall be nonreactive with the products.

15.8.23.4 Cooling systems requiring compression of the products shall not be used.

15.8.24 Pressure-relief-valve settings shall not be less than 0.02 MPa gauge and for pressure tanks not greater than 0.7 MPa gauge for the carriage of propylene oxide and not greater than 0.53 MPa gauge for the carriage of propylene oxide/ethylene oxide mixtures.

15.8.25.1 The piping system for tanks to be loaded with these products shall be separated (as defined in 3.1.4) from piping systems for all other tanks, including empty tanks. If the piping system for the tanks to be loaded is not independent (as defined in 1.3.18), the required piping separation shall be accomplished by the removal of spool-pieces, valves, or other pipe section and the installation of blank flanges at these locations. The required separation applies to all liquid and vapour piping, liquid and vapour vent lines and any other possible connections, such as common inert-gas supply lines.

15.8.25.2 These products may be transported only in accordance with cargo-handling plans that have been approved by the Administration. Each intended loading arrangement shall be shown on a separate cargo-handling plan. Cargo-handling plans shall show the entire cargo piping system and the locations for installation of blank flanges needed to meet the above piping separation requirements. A copy of each approved cargo-handling plan shall be maintained on board the ship. The International Certificate of Fitness for the Carriage of Dangerous Chemicals in Bulk shall be endorsed to include reference to the approved cargo-handling plans.

15.8.25.3 Before each initial loading of these products and before every subsequent return to such service, certification verifying that the required piping separation has been achieved shall be obtained from a responsible person acceptable to the port Administration and carried on board the ship. Each connection between a blank flange and a pipeline flange shall be fitted with a wire and seal by the responsible person to ensure that in-advertent removal of the blank flange is impossible.

15.8.26.1 No cargo tanks shall be more than 98% liquid-full at the reference temperature.

15.8.26.2 The maximum volume to which a cargo tank shall be loaded is:

R VL  0.98V L

Where VL = maximum volume to which the tank may be loaded

V = volume of the tank

R = density of cargo at the reference temperature

L = density of cargo at the loading temperature and pressure

15.8.26.3 The maximum allowable tank filling limits for each cargo tank shall be indicated for each loading temperature which may be applied and for the applicable maximum reference temperature, on a list to be approved by the Administration. A copy of the list shall be permanently kept on board by the master.

Bilaga

15.8.27 The cargo shall be carried under a suitable protective padding of nitrogen gas. An automatic nitrogen make-up system shall be installed to prevent the tank pressure falling below 0.007 MPa gauge in the event of product temperature fall due to ambient conditions or maloperation of refrigeration systems. Sufficient nitrogen shall be available on board to satisfy the demand of the automatic pressure control. Nitrogen of commercially pure quality (99.9% by volume) shall be used for padding. A battery of nitrogen bottles connected to the cargo tanks through a pressure-reduction valve satisfies the intention of the expression “automatic” in this context.

15.8.28 The cargo tank vapour space shall be tested prior to and after loading to ensure that the oxygen content is 2% by volume or less.

15.8.29 A water-spray system of sufficient capacity shall be provided to blanket effectively the area surrounding the loading manifold, the exposed deck piping associated with product handling, and the tank domes. The arrangement of piping and nozzles shall be such as to give a 2 uniform distribution rate of 10 l/m /min. Remote manual operation shall be arranged such that remote starting of pumps supplying the water-spray system and remote operation of any normally closed valves in the system can be carried out from a suitable location outside the cargo area, adjacent to the accommodation spaces and readily accessible and operable in the event of fire in the areas protected. The water-spray system shall be capable of both local and remote manual operation, and the arrangement shall ensure that any spilled cargo is washed away. Additionally, a water hose with pressure to the nozzle, when atmospheric temperatures permit, shall be connected ready for immediate use during loading and unloading operations.

15.8.30 A remotely operated, controlled closing-rate, shutoff valve shall be provided at each cargo-hose connection used during cargo transfer.

Bilaga

15.9 Sodium chlorate solution (50% or less by mass)

15.9.1 Tanks and associated equipment, which have contained this product may be used for other cargoes after thorough cleaning by washing or purging. 15.9.2 In the event of spillage of this product, all spilled liquid shall be thoroughly washed away without delay. To minimize fire risk, spillage shall not be allowed to dry out.

15.10 Sulphur (molten)

15.10.1 Cargo tank ventilation shall be provided to maintain the concentration of hydrogen sulphide below one half of its lower explosive limit through-out the cargo tank vapour space for all conditions of carriage (i.e. below 1.85% by volume). 15.10.2 Where mechanical ventilation systems are used for maintaining low gas concentrations in cargo tanks, an alarm system shall be provided to give warning if the system fails. 15.10.3 Ventilation systems shall be so designed and arranged as to preclude depositing of sulphur within the system. 15.10.4 Openings to void spaces adjacent to cargo tanks shall be so designed and fitted as to prevent the entry of water, sulphur or cargo vapour. 15.10.5 Connections shall be provided to permit sampling and analysing of vapour in void spaces. 15.10.6 Cargo temperature controls shall be provided to ensure that the temperature of the sulphur does not exceed 155°C. 15.10.7 Sulphur (molten) has a flashpoint above 60°C ; however, electrical equipment shall be certified safe for gases evolved.

15.11 Acids

15.11.1 The ship's shell plating shall not form any boundaries of tanks containing mineral acids. 15.11.2 Proposals for lining steel tanks and related piping systems with corrosion-resistant materials may be considered by the Administration. The elasticity of the lining shall not be less than that of the supporting boundary plating. 15.11.3 Unless constructed wholly of corrosion-resistant materials or fitted with an approved lining, the plating thickness shall take into account the corrosivity of the cargo. 15.11.4 Flanges of the loading and discharge manifold connections shall be provided with shields, which may be portable, to guard against the danger of the cargo being sprayed; and in addition, drip trays shall also be provided to guard against leakage on to the deck. 15.11.5 Because of the danger of evolution of hydrogen when these substances are being carried, the electrical arrangements shall comply with 10.1.4. The certified safe type equipment shall be suitable for use in hydrogen/air mixtures. Other sources of ignition shall not be permitted in such spaces.

Bilaga

15.11.6 Substances subjected to the requirements of this section shall be segregated from oil fuel tanks, in addition to the segregation requirements in 3.1.1. 15.11.7 Provision shall be made for suitable apparatus to detect leakage of cargo into adjacent spaces. 15.11.8 The cargo pump-room bilge pumping and drainage arrangements shall be of corrosion-resistant materials.

15.12 Toxic products

15.12.1 Exhaust openings of tank vent systems shall be located: .1 at a height of B/3 or 6 m, whichever is greater, above the weather deck or, in the case of a deck tank, the access gangway; .2 not less than 6 m above the fore-and-aft gangway, if fitted within 6 m of the gangway; .3 15 m from any opening or air intake to any accommodation and service spaces; and .4 the vent height may be reduced to 3 m above the deck or fore-and-aft gangway, as applicable, provided high-velocity vent valves of an approved type, directing the vapour/air mixture upwards in an unimpeded jet with an exit velocity of at least 30 m/s, are fitted. 15.12.2 Tank venting systems shall be provided with a connection for a vapour-return line to the shore installation. 15.12.3 Products shall: .1 not be stowed adjacent to oil fuel tanks; .2 have separate piping systems; and .3 have tank vent systems separate from tanks containing non-toxic products. 15.12.4 Cargo tank relief-valve settings shall be a minimum of 0.02 MPa gauge.

15.13 Cargoes protected by additives

15.13.1 Certain cargoes with a reference in column o in the table of chapter 17, by the nature of their chemical make-up, tend, under certain conditions of temperature, exposure to air or contact with a catalyst, to undergo polymerization, decomposition, oxidation or other chemical changes. Mitigation of this tendency is carried out by introducing small amounts of chemical additives into the liquid cargo or controlling the cargo tank environment. 15.13.2 Ships carrying these cargoes shall be so designed as to eliminate from the cargo tanks and cargo-handling system any material of construction or contaminants which could act as a catalyst or destroy the inhibitor.

Bilaga

15.13.3 Care shall be taken to ensure that these cargoes are sufficiently protected to prevent deleterious chemical change at all times during the voyage. Ships carrying such cargoes shall be provided with a certificate of protection from the manufacturer, and kept during the voyage, specifying:

.1 the name and amount of additive present;

.2 whether the additive is oxygen-dependent;

.3 date additive was put in the product and duration of effectiveness;

.4 any temperature limitations qualifying the additives' effective lifetime; and

.5 the action to be taken shall the length of voyage exceed the effective lifetime of the additives.

15.13.4 Ships using the exclusion of air as the method of preventing oxidation of the cargo shall comply with 9.1.3.

15.13.5 A product containing an oxygen-dependent additive shall be carried without inertion (in 3 tanks of a size not greater than 3,000 m ). Such cargoes shall not be carried in a tank requiring * inertion under the requirements of SOLAS chapter II-2 .

15.13.6 Venting systems shall be of a design that eliminates blockage from polymer build-up. Venting equipment shall be of a type that can be checked periodically for adequacy of operation.

15.13.7 Crystallization or solidification of cargoes normally carried in the molten state can lead to depletion of inhibitor in parts of the tank's contents. Subsequent remelting can thus yield pockets of uninhibited liquid, with the accompanying risk of dangerous polymerization. To prevent this, care shall be taken to ensure that at no time are such cargoes allowed to crystallize or solidify, either wholly or partially, in any part of the tank. Any required heating arrangements shall be such as to ensure that in no part of the tank does cargo become overheated to such an extent that any dangerous polymerization can be initiated. If the temperature from steam coils would induce overheating, an indirect low-temperature heating system shall be used.

15.14 Cargoes with a vapour pressure greater than 0.1013 MPa absolute at 37.8°C

15.14.1 For a cargo referenced in column o in the table of chapter 17 to this section, a mechanical refrigeration system shall be provided unless the cargo system is designed to withstand the vapour pressure of the cargo at 45°C. Where the cargo system is designed to withstand the vapour pressure of the cargo at 45°C, and no refrigeration system is provided, a notation shall be made in the conditions of carriage on the International Certificate of Fitness for the Carriage of Dangerous Chemicals in Bulk to indicate the required relief-valve setting for the tanks.

15.14.2 A mechanical refrigeration system shall maintain the liquid temperature below the boiling temperature at the cargo tank design pressure.

* For equivalency arrangements for the carriage of styrene monomer, see MSC/Circ.879 and MSC/Circ.879/Corr.1

Bilaga

15.14.3 When ships operate in restricted areas and at restricted times of the year, or on voyages of limited duration, the Administration involved may agree to waive requirements for a refrigeration system. A notation of any such agreement, listing geographic area restrictions and times of the year, or voyage duration limitations, shall be included in the conditions of carriage on the International Certificate of Fitness for the Carriage of Dangerous Chemicals in Bulk. 15.14.4 Connections shall be provided for returning expelled gases to shore during loading. 15.14.5 Each tank shall be provided with a pressure gauge which indicates the pressure in the vapour space above the cargo. 15.14.6 Where the cargo needs to be cooled, thermometers shall be provided at the top and bottom of each tank. 15.14.7.1 No cargo tanks shall be more than 98% liquid-full at the reference temperature (R). 15.14.7.2 The maximum volume (VL) of cargo to be loaded in a tank shall be:

R VL 0.98V L

Where V = volume of the tank

R = density of cargo at the reference temperature (R)

L = density of cargo at the loading temperature

15.14.7.3 The maximum allowable tank filling limits for each cargo tank shall be indicated for each loading temperature which may be applied, and for the applicable maximum reference temperature, on a list approved by the Administration. A copy of the list shall be permanently kept on board by the master.

15.15 Cargoes with low ignition temperature and wide flammability range

Deleted.

15.16 Cargo contamination

15.16.1 Deleted. 15.16.2 Where column o in the table of chapter 17 refers to this section, water shall not be allowed to contaminate this cargo. In addition, the following provisions apply: .1 Air inlets to pressure/vacuum-relief valves of tanks containing the cargo shall be situated at least 2 m above the weather deck. .2 Water or steam shall not be used as the heat-transfer media in a cargo temperature control system required by chapter 7. .3 The cargo shall not be carried in cargo tanks adjacent to permanent ballast or water tanks unless the tanks are empty and dry. 72

Bilaga

.4 The cargo shall not be carried in tanks adjacent to slop tanks or cargo tanks containing ballast or slops or other cargoes containing water which may react in a dangerous manner. Pumps, pipes or vent lines serving such tanks shall be separate from similar equipment serving tanks containing the cargo. Pipelines from slop tanks or ballast lines shall not pass through tanks containing the cargo unless encased in a tunnel.

15.17 Increased ventilation requirements

For certain products, the ventilation system as described in 12.1.3 shall have a minimum capacity of at least 45 changes of air per hour, based upon the total volume of space. The ventilation system exhaust ducts shall discharge at least 10 m away from openings into accommodation spaces, work areas or other similar spaces, and intakes to ventilation systems, and at least 4 m above the tank deck.

15.18 Special cargo pump-room requirements

For certain products, the cargo pump-room shall be located on the deck level or cargo pumps shall be located in the cargo tank. The Administration may give special consideration to cargo pump-rooms below deck.

15.19 Overflow control

15.19.1 The provisions of this section are applicable where specific reference is made in column o in the table of chapter 17, and are in addition to the requirements for gauging devices.

15.19.2 In the event of a power failure on any system essential for safe loading, an alarm shall be given to the operators concerned.

15.19.3 Loading operations shall be terminated at once in the event of any system essential for safe loading becoming inoperative.

15.19.4 Level alarms shall be capable of being tested prior to loading.

15.19.5 The high-level alarm system required under 15.19.6 shall be independent of the overflow-control system required by 15.19.7 and shall be independent of the equipment required by 13.1.

15.19.6 Cargo tanks shall be fitted with a visual and audible high-level alarm which complies with 15.19.1 to 15.19.5 and which indicates when the liquid level in the cargo tank approaches the normal full condition.

15.19.7 A tank overflow-control system required by this section shall:

.1 come into operation when the normal tank loading procedures fail to stop the tank liquid level exceeding the normal full condition;

.2 give a visual and audible tank-overflow alarm to the ship's operator; and

.3 provide an agreed signal for sequential shutdown of onshore pumps or valves or both and of the ship's valves. The signal, as well as the pump and valve

Bilaga

shutdown, may be dependent on operator's intervention. The use of shipboard automatic closing valves shall be permitted only when specific approval has been obtained from the Administration and the port State authority concerned. 15.19.8 The loading rate (LR) of the tank shall not exceed: 3600U 3 LR  (m / h) t 3 where U = ullage volume (m ) at operating signal level; t = time(s) needed from the initiating signal to fully stopping the cargo flow into the tank, being the sum of times needed for each step in sequential operations such as operator's responses to signals, stopping pumps and closing valves; and shall also take into account the pipeline system design pressure.

15.20 Alkyl (C7-C9) nitrates, all isomers

15.20.1 The carriage temperature of the cargo shall be maintained below 100°C to prevent the occurrence of a self-sustaining, exothermic decomposition reaction. 15.20.2 The cargo may not be carried in independent pressure vessels permanently affixed to the vessel's deck unless: .1 the tanks are sufficiently insulated from fire; and .2 the vessel has a water deluge system for the tanks such that the cargo temperature is maintained below 100°C and the temperature rise in the tanks does not exceed 1.5°C per hour for a fire of 650°C.

15.21 Temperature sensors

Temperature sensors shall be used to monitor the cargo pump temperature to detect overheating due to pump failures.

Bilaga

Chapter 16 Operational requirements

16.1 Maximum allowable quantity of cargo per tank

3 16.1.1 The quantity of a cargo required to be carried in a type 1 ship shall not exceed 1,250 m in any one tank. 3 16.1.2 The quantity of cargo required to be carried in a type 2 ship shall not exceed 3,000 m in any one tank. 16.1.3 Tanks carrying liquids at ambient temperatures shall be so loaded as to avoid the tank becoming liquid-full during the voyage, having due regard to the highest temperature which the cargo may reach.

16.2 Cargo information

16.2.1 A copy of this Code, or national regulations incorporating the provisions of this Code, shall be on board every ship covered by this Code. 16.2.2 Any cargo offered for bulk shipment shall be indicated in the shipping documents by the product name, under which it is listed in chapter 17 or 18 of the Code or the latest edition of MEPC.2/Circ. or under which it has been provisionally assessed. Where the cargo is a mixture, an analysis indicating the dangerous components contributing significantly to the total hazard of the product shall be provided, or a complete analysis if this is available. Such an analysis shall be certified by the manufacturer or by an independent expert acceptable to the Administration. 16.2.3 Information shall be on board, and available to all concerned, giving the necessary data for the safe carriage of the cargo in bulk. Such information shall include a cargo stowage plan, to be kept in an accessible place, indicating all cargo on board, including each dangerous chemical carried: .1 a full description of the physical and chemical properties, including reactivity, necessary for the safe containment of the cargo; .2 action to be taken in the event of spills or leaks; .3 countermeasures against accidental personal contact; .4 fire-fighting procedures and fire-fighting media; .5 procedures for cargo transfer, tank cleaning, gas-freeing and ballasting; and .6 for those cargoes required to be stabilized or inhibited, the cargo shall be refused if the certificate required by these paragraphs is not supplied. 16.2.4 If sufficient information, necessary for the safe transportation of the cargo, is not available, the cargo shall be refused.

Bilaga

16.2.5 Cargoes which evolve highly toxic imperceptible vapours shall not be transported unless perceptible additives are introduced into the cargo.

16.2.6 Where column o in the table of chapter 17 refers to this paragraph, the cargo's viscosity at 20°C shall be specified on a shipping document, and if the cargo's viscosity exceeds 50 mPa.s at 20°C, the temperature at which the cargo has a viscosity of 50 mPa.s shall be specified in the shipping document.

16.2.7 Deleted.

16.2.8 Deleted.

16.2.9 Where column o in the table of chapter 17 refers to this paragraph, the cargo's melting point shall be indicated in the shipping document.

16.3 Personnel training

16.3.1 All personnel shall be adequately trained in the use of protective equipment and have basic training in the procedures appropriate to their duties necessary under emergency conditions.

16.3.2 Personnel involved in cargo operations shall be adequately trained in handling procedures.

16.3.3 Officers shall be trained in emergency procedures to deal with conditions of leakage, spillage or fire involving the cargo and a sufficient number of them shall be instructed and trained in essential first aid for cargoes carried, based on the guidelines developed by the * Organization .

16.4 Opening of and entry into cargo tanks

16.4.1 During handling and carriage of cargoes producing flammable and/or toxic vapours or when ballasting after the discharge of such cargo, or when loading or unloading cargo, cargo tank lids shall always be kept closed. With any hazardous cargo, cargo tank lids, ullage and sighting ports and tank washing access covers shall be open only when necessary.

16.4.2 Personnel shall not enter cargo tanks, void spaces around such tanks, cargo-handling spaces or other enclosed spaces unless:

.1 the compartment is free of toxic vapours and not deficient in oxygen; or

.2 personnel wear breathing apparatus and other necessary protective equipment, and the entire operation is under the close supervision of a responsible officer.

16.4.3 Personnel shall not enter such spaces when the only hazard is of a purely flammable nature, except under the close supervision of a responsible officer.

* Refer to the Medical First Aid Guide for Use in Accidents Involving Dangerous Goods (MFAG), which provides advice on the treatment of casualties in accordance with the symptoms exhibited as well as equipment and antidotes that may be appropriate for treating the casualty and to the relevant provisions of the STCW Code, parts A and B.

Bilaga

16.5 Stowage of cargo samples

16.5.1 Samples which have to be kept on board shall be stowed in a designated space situated in the cargo area or, exceptionally, elsewhere, subject to the approval of the Administration. 16.5.2 The stowage space shall be: .1 cell-divided in order to avo id shifting of the bottles at sea; .2 made of material fully resistant to the different liquids intended to be stowed; and .3 equipped with adequate ventilation arrangements. 16.5.3 Samples which react with each other dangerously shall not be stowed close to each other. 16.5.4 Samples shall not be retained on board longer than necessary.

16.6 Cargoes not to be exposed to excessive heat

16.6.1 Where the possibility exists of a dangerous reaction of a cargo, such as polymerization, decomposition, thermal instability or evolution of gas, resulting from local overheating of the cargo in either the tank or associated pipelines, such cargo shall be loaded and carried adequately segregated from other products whose temperature is sufficiently high to initiate a reaction of such cargo (see 7.1.5.4). 16.6.2 Heating coils in tanks carrying this product shall be blanked off or secured by equivalent means. 16.6.3 Heat-sensitive products shall not be carried in deck tanks, which are not insulated. 16.6.4 In order to avoid elevated temperatures, this cargo shall not be carried in deck tanks.

Bilaga

ANNEX

ADOPTION OF AMENDMENTS TO THE INTERNATIONAL CODE FOR THE CONSTRUCTION AND EQUIPMENT OF SHIPS CARRYING DANGEROUS CHEMICALS IN BULK (IBC CODE)

The existing text of chapters 17, 18 and 19 of the IBC Code is replaced by the following:

Chapter 17 Summary of minimum requirements

Mixtures of noxious liquid substances presenting pollution hazards only, and which are assessed or provisionally assessed under regulation 6.3 of MARPOL Annex II, may be carried under the requirements of the Code applicable to the appropriate position of the entry in this chapter for Noxious Liquid Substances, not otherwise specified (n.o.s.).

EXPLANATORY NOTES

Product name The product name shall be used in the shipping document for any cargo (column a) offered for bulk shipments. Any additional name may be included in brackets after the product name. In some cases, the product names are not identical with the names given in previous issues of the Code UN Number Deleted

(column b)

Pollution Category The letter X, Y, Z means the Pollution Category assigned to each product (column c) under MARPOL Annex II Hazards "S" means that the product is included in the Code because of its safety (column d) hazards; "P" means that the product is included in the Code because of its pollution hazards; and "S/P" means that the product is included in the Code because of both its safety and pollution hazards Ship type 1: ship type 1 (2.1.2.1) (column e) 2: ship type 2 (2.1.2.2) 3: ship type 3 (2.1.2.3) Tank type 1: independent tank (4.1.1) (column f) 2: integral tank (4.1.2) G: gravity tank (4.1.3) P: pressure tank (4.1.4) Tank vents Cont.: controlled venting (column g) Open: open venting Tank environmental Inert: inerting (9.1.2.1) control Pad: liquid or gas padding (9.1.2.2) (column h) Dry: drying (9.1.2.3) Vent: natural or forced ventilation (9.1.2.4) No: no special requirements under this Code Electrical Temperature classes (i') T1 to T6 equipment – indicates no requirements (column i) blank no information Apparatus group (i'') IIA, IIB or IIC: – indicates no requirements blank no information Flashpoint (i''') Yes: flashpoint exceeding 60°C (10.1.6) No: flashpoint not exceeding 60°C (10.1.6) NF: non-flammable product (10.1.6)

I:\MSC\91\22-Add-1.doc

Bilaga

Gauging O: open gauging (13.1.1.1) (column j) R: restricted gauging (13.1.1.2) C: closed gauging (13.1.1.3) Vapour detection F: flammable vapours (column k) T: toxic vapours No: indicates no special requirements under this Code Fire protection A: alcohol-resistant foam or multi-purpose foam (column l) B: regular foam; encompasses all foams that are not of an alcohol-resistant type, including fluoro-protein and aqueous-film-forming foam (AFFF) C: water-spray D: dry chemical No: no special requirements under this Code Materials of construction Deleted

(column m)

Emergency Yes: see 14.3.1 equipment No: no special requirements under this Code

(column n)

Specific and When specific reference is made to chapters 15 and/or 16, these operational requirements shall be additional to the requirements in any other column requirements

(column o)

___________________

Note: The following pages are numbered according to the database generation.

Bilaga

o 15.11.2, 15.11.3, 15.11.4, 15.11.6, 15.11.7, 15.11.8, 15.19.6, 16.2.9 15.11.2, 15.11.3, 15.11.4, 15.11.6, 15.11.7, 15.11.8, 15.19.6 15.19.6, 16.2.6, 16.2.9 15.12, 15.13,15.17, 15.18, 15.19, 16.6.1, 16.6.2, 16.6.3 15.12, 15.19.6 15.12.3, 15.12.4, 15.19.6 15.19.6, 16.2.6, 16.2.9 15.12.3, 15.13, 15.19.6, 16.2.9, 16.6.1 15.11.2, 15.11.3, 15.11.4, 15.11.6, 15.11.7, 15.11.8, 15.12.3, 15.12.4, 15.13, 15.17, 15.19, 16.2.9, 16.6.1 15.12, 15.13, 15.17, 15.19 15.19.6, 16.2.6 16.2.9 15.19.6, 16.2.9 15.19.6, 16.2.9 15.19.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.9 15.19.6, 16.2.9 15.19.6, 16.2.9 15.19.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.12.3, 15.12.4, 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6 15.19.6 15.19.6 15.19.6 n Yes Yes No Yes No No No No Yes Yes No No No No No No No No No No No No No No No No No No l A A A A A AC ABC No A A AB A AC A A A A A A AB ABC ABC ABC ABC A A A ABC k F FT No T FT FT No No FT FT No T No No No No No No No No No T No No F F F No j R R O C R R O C C C O R O O O O O O O O O R O O R R R O i''' No No Yes Yes No No Yes NF No No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No No No Yes i'' IIA IIA IIA IIA IIA - IIA IIB IIB - - - - IIA IIA IIA i' T1 T2 T1 T2 T1 - T2 T1 - - - - T3 T3 T3 -

h No No No No No No No No No No No No No No No No No No No No No No No No No No No No g Cont Cont Open Cont Cont Cont Open Open Cont Cont Open Cont Open Open Open Open Open Open Open Open Open Cont Open Open Cont Cont Cont Open f 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G e 3 2 2 2 2 3 2 2 2 2 3 3 2 3 2 2 2 3 2 2 2 2 2 2 2 3 3 3 d S/P S/P P S/P S/P S/P S/P S/P S/P S/P P S/P S/P P P P P P P P S/P S/P S/P S/P P P P S/P c Z Z X Y Z Y Y Y Y Y Y Z X Y Y Y Y Y Y Y Y Y Y Y X Y Y Y

a Acetic acid Acetic anhydride Acetochlor Acetone cyanohydrin Acetonitrile Acetonitrile (Low purity grade) Acid oil mixture from soyabean, corn (maize) and sunflower oil refining Acrylamide solution (50% or less) Acrylic acid Acrylonitrile Acrylonitrile-Styrene copolymer dispersion in polyether polyol Adiponitrile Alachlor technical (90% or more) Alcohol (C9-C11) poly (2.5-9) ethoxylate Alcohol (C6-C17) (secondary) poly(3-6)ethoxylates Alcohol (C6-C17) (secondary) poly(7-12)ethoxylates Alcohol (C12-C16) poly(1-6)ethoxylates Alcohol (C12-C16) poly(20+)ethoxylates Alcohol (C12-C16) poly(7-19)ethoxylates Alcohols (C13+) Alcohols (C12+), primary, linear Alcohols (C8-C11), primary, linear and essentially linear Alcohols (C12-C13), primary, linear and essentially linear Alcohols (C14-C18), primary, linear and essentially linear Alkanes (C6-C9) Iso- and cyclo-alkanes (C10-C11) Iso- and cyclo-alkanes (C12+) Alkanes(C10-C26), linear and branched, (flashpoint >60°C)

Bilaga

o 15.19.6 15.19.6, 16.2.6 15.12.3, 15.12.4, 15.19.6, 16.2.6 15.19.6, 16.2.6, 16.2.9 15.12, 15.17, 15.19 15.19.6, 16.2.9 15.12, 15.17, 15.19 15.19.6, 16.2.6, 16.2.9 15.19.6 15.19.6, 16.2.6 15.12, 15.17, 15.19.6 15.19.6 15.19.6 15.19.6, 16.2.6 15.19.6, 16.2.6, 16.2.9 15.12, 15.17, 15.19 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 16.2.6, 16.2.9 15.19.6, 15.20, 16.6.1, 16.6.2, 16.6.3 15.19.6 15.19.6 16.2.6 16.2.6, 16.2.9 n No No No No Yes No No No No No No No No No No No Yes No No No No No No No No No No No No l A AB ABC A No A ABC BD A ABC ABC A A AB A No BCD AB A AB No No AB A AB A AB No No k F No T No T F T No No No FT F No No No No T No No No No No No No No F No No No j R O R O C R C O O O C R O O O O C O O O O O O O O R O O O i''' No Yes Yes Yes Yes No Yes Yes Yes Yes No No Yes Yes Yes NF Yes Yes Yes Yes Yes Yes Yes Yes Yes No Yes Yes Yes i'' IIA - - IIB IIA - - IIA IIA - - - - - IIB i' T3 - - T4 T1 - - T1 T4 - - - - - T4

h No No No No No No No No No No No No No No No No No No No No No No No No No No No No No g Cont Open Cont Open Cont Cont Cont Open Open Open Cont Cont Open Open Open Open Cont Open Open Open Open Open Open Open Open Cont Open Open Open f 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G e 3 2 2 2 3 2 1 2 3 2 3 2 2 3 2 2 1 3 3 2 3 3 2 2 3 2 3 3 3 d P P S/P P S/P P S/P S/P P S/P S/P P P P P S/P S/P P P P P P S/P P P P P P P c Y Y Y X Z Y X Y Z Y Y Y X Y Y Y X Y Y Y Y Y Y Y Z Y Z Y Y

a n-Alkanes (C10+) Alkaryl polyethers (C9-C20) Alkenoic acid, polyhydroxy ester borated Alkenyl (C11+) amide Alkenyl (C16-C20) succinic anhydride Alkyl acrylate-vinylpyridine copolymer in toluene Alkylaryl phosphate mixtures (more than 40% Diphenyl tolyl phosphate, less than 0.02% ortho-isomers) Alkylated (C4-C9) hindered phenols Alkylbenzene, alkylindane, alkylindene mixture (each C12-C17) Alkyl benzene distillation bottoms Alkylbenzene mixtures (containing at least 50% of toluene) Alkyl (C3-C4) benzenes Alkyl (C5-C8) benzenes Alkyl(C9+)benzenes Alkyl (C11-C17) benzene sulphonic acid Alkylbenzene sulphonic acid, sodium salt solution Alkyl (C12+) dimethylamine Alkyl dithiocarbamate (C19-C35) Alkyldithiothiadiazole (C6-C24) Alkyl ester copolymer (C4-C20) Alkyl (C8-C10)/(C12-C14):(40% or less/60% or more) polyglucoside solution (55% or less) Alkyl (C8-C10)/(C12-C14):(60% or more/40% or less) polyglucoside solution(55% or less) Alkyl (C7-C9) nitrates Alkyl(C7-C11)phenol poly(4-12) ethoxylate Alkyl (C8-C40) phenol sulphide Alkyl (C8-C9) phenylamine in aromatic solvents Alkyl (C9-C15) phenyl propoxylate Alkyl (C8-C10) polyglucoside solution (65% or less) Alkyl (C8-C10)/(C12-C14):(50%/50%) polyglucoside solution (55% or less)

Bilaga

o 15.19.6, 16.2.9 15.12, 15.17, 15.19, 16.2.6 16.2.9 15.19.6, 16.2.6 15.19.6, 16.2.9 15.11.2, 15.11.3, 15.11.4, 15.11.6, 15.11.7, 15.11.8, 15.12, 15.17, 15.19, 16.2.6, 16.2.9 15.12, 15.17, 15.19, 16.2.6 15.12, 15.17, 15.19, 16.2.6 15.12, 15.17, 15.19, 16.2.6 15.12, 15.17, 15.19 15.12, 15.17, 15.19 15.11, 15.12, 15.17, 15.19 15.19.6 15.19.6 16.2.9 15.19.6, 16.2.9 15.19.6 16.2.9 15.2, 15.11.4, 15.11.6, 15.18, 15.19.6, 16.2.9 15.12, 15.17, 15.19, 16.6.1, 16.6.2, 16.6.3 16.2.9 15.19.6 n No Yes No No No Yes Yes Yes Yes Yes Yes Yes No No No No No No Yes No No No No No No Yes No No No No l No AC A AB ABC ABC ABC ABC ABC A A No A AD A A A A ABC No A A No A A A No A AB AB k No T No No No T T T T FT FT T No No No No T No T No No No No No No FT No F F F j O C O O O C C C C C C C O O O O R O R O O O O O O C O R R R i''' Yes Yes Yes Yes Yes Yes Yes Yes Yes No No NF Yes Yes Yes Yes Yes Yes NF NF Yes Yes NF Yes Yes No NF No No No i'' - - - - - - IIB IIA - - IIA - - - IIB IIA IIA IIA i' - - - - - - T2 T2 - - T2 - - - T4 T2 T2 T2

h No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No g Open Cont Open Open Open Cont Cont Cont Cont Cont Cont Cont Open Open Open Open Cont Open Cont Open Open Open Open Open Open Cont Open Cont Cont Cont f 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 1G 2G 2G 2G 2G 2G 2G 2G e 3 2 2 3 2 2 3 2 3 2 2 2 2 3 3 3 3 3 2 3 3 3 2 3 3 2 3 3 3 3 d P S/P P P S/P S/P S/P S/P S/P S/P S/P S/P P S/P P S/P S/P P S/P S/P P P S/P P P S/P P P P P c Y X Y Y Y Y Y Y Y Y Y Y Y Z Z Z Z Z Y Z Z Z Z Z Z Y Z Y Z Z

a Alkyl (C12-C14) polyglucoside solution (55% or less) Alkyl(C12-C16) propoxyamine ethoxylate Alkyl(C10-C20, saturated and unsaturated) phosphite Alkyl sulphonic acid ester of phenol Alkyl (C18+) toluenes Alkyl(C18-C28)toluenesulfonic acid Alkyl(C18-C28)toluenesulfonic acid, calcium salts, borated Alkyl (C18-C28) toluenesulfonic acid, calcium salts, low overbase Alkyl (C18-C28) toluenesulphonic acid, calcium salts, high overbase Allyl alcohol Allyl chloride Aluminium chloride/Hydrogen chloride solution Aluminium sulphate solution 2-(2-Aminoethoxy) ethanol Aminoethyldiethanolamine/Aminoethylethanolamine solution Aminoethyl ethanolamine N-Aminoethylpiperazine 2-Amino-2-methyl-1-propanol Ammonia aqueous (28% or less) Ammonium chloride solution (less than 25%) (*) Ammonium hydrogen phosphate solution Ammonium lignosulphonate solutions Ammonium nitrate solution (93% or less) Ammonium polyphosphate solution Ammonium sulphate solution Ammonium sulphide solution (45% or less) Ammonium thiosulphate solution (60% or less) Amyl acetate (all isomers) n-Amyl alcohol Amyl alcohol, primary

Bilaga

o 15.19.6 15.12, 15.17, 15.19 15.19.6, 16.2.6, 16.2.9 15.19.6 15.12.3, 15.19, 16.2.6, 16.2.9 15.12.1, 15.17, 15.19.6, 16.2.9 15.19.6, 16.2.9 15.19.6, 16.2.6 15.19.6 15.19.6 15.12, 15.13, 15.17, 15.19 15.12, 15.17, 15.19.6 15.12, 15.17, 15.19.6 15.12, 15.17, 15.19.6 15.12, 15.17, 15.19.6 15.12, 15.17, 15.19.6 15.19.6 15.19.6 15.13, 15.19.6, 16.6.1, 16.6.2 15.12, 15.17, 15.19.6 15.19.6 15.19.6 15.19.6 15.13, 15.19.6, 16.6.1, 16.6.2 n No No No No No No No No No No No No Yes No No No No No No No No No No No Yes No No No No l AB A A A AB B AD AB AD AB A A AB ABC ABC ABC ABC A A No A A A A A A A A AD k F F F T No F No FT T No No No T T FT T T FT No T No F FT F FT F No F No j R R R C O R O C R O O O C C C C C C O R O R R R R R O R R i''' No No No Yes Yes No Yes No Yes Yes Yes Yes Yes Yes No Yes Yes No Yes NF Yes No No No No No Yes No Yes i'' IIA IIA IIB IIA IIA IIA IIA - IIA - - IIA - IIA IIB IIA IIA IIA IIA i' T2 T2 T2 T1 T4 T1 T1 - T3 - - T3 - T2 T2 T1 T2 T4 T1

h No No No No No No No No No No No No No No No No No No No No No No No No No No No No No g Cont Cont Cont Cont Open Cont Open Cont Cont Open Open Open Cont Cont Cont Cont Cont Cont Open Cont Open Cont Cont Cont Cont Cont Open Cont Cont f 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G e 3 3 2 2 2 2 2 3 3 2 2 3 2 2 2 2 2 2 3 3 2 3 2 3 2 2 2 3 2 d P P P S/P P P S/P S/P S/P P P P S/P S/P S/P S/P S/P S/P P S/P P P S/P P S/P P P P S/P c Z Z X Y Y X Y Y Z Y Y Y Y X X X X X Z Z X Y Y Z Y X X Y Y

60°C (>25% but <99% by volume) ≤

a sec-Amyl alcohol tert-Amyl alcohol tert-Amyl methyl ether Aniline Aryl polyolefins (C11-C50) Aviation alkylates (C8 paraffins and iso-paraffins BPT 95 - 120°C) Barium long chain (C11-C50) alkaryl sulphonate Benzene and mixtures having 10% benzene or more (i) Benzene sulphonyl chloride Benzenetricarboxylic acid, trioctyl ester Benzyl acetate Benzyl alcohol Benzyl chloride Bio-fuel blends of Diesel/gas oil and Alkanes (C10-C26), linear and branched with a flashpoint >60°C (>25% but <99% by volume) Bio-fuel blends of Diesel/gas oil and Alkanes (C10-C26), linear and branched with a flashpoint Bio-fuel blends of Diesel/gas oil and FAME (>25% but <99% by volume) Bio-fuel blends of Diesel/gas oil and vegetable oil (>25% but <99% by volume) Bio-fuel blends of Gasoline and Ethyl alcohol (>25% but <99% by volume) Brake fluid base mix: Poly(2-8)alkylene (C2-C3) glycols/Polyalkylene (C2-C10) glycols monoalkyl (C1-C4) ethers and their borate esters Bromochloromethane Butene oligomer Butyl acetate (all isomers) Butyl acrylate (all isomers) tert-Butyl alcohol Butylamine (all isomers) Butylbenzene (all isomers) Butyl benzyl phthalate Butyl butyrate (all isomers) Butyl/Decyl/Cetyl/Eicosyl methacrylate mixture

Bilaga

60°C (>25% but <99% by volume) ≤

Bilaga

o 15.8.1 to 15.8.7, 15.8.12, 15.8.13, 15.8.16, 15.8.17, 15.8.18, 15.8.19, 15.8.21, 15.8.25, 15.8.27, 15.8.29, 15.19.6 15.4.6, 15.12, 15.19.6 15.13, 15.19.6, 16.6.1, 16.6.2 15.19.6 15.19.6 15.11.2, 15.11.3, 15.11.4, 15.11.6, 15.11.7, 15.11.8, 15.19.6 15.19.6 15.12, 15.17, 15.19 15.12.3, 15.12.4, 15.19.6, 16.2.9 16.2.9 15.19.6 15.19, 16.2.9 16.2.9 15.19.6 15.19.6, 16.2.6 15.19.6, 16.2.6 15.19.6, 16.2.6 15.12, 15.17, 15.19, 16.2.6, 16.2.9 16.2.9 15.12, 15.19.6, 16.2.9 15.3, 15.12, 15.19 15.12, 15.17, 15.19.6 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6 15.13, 15.19.6, 16.2.9, 16.6.1, 16.6.2 15.19, 16.2.6 n No No No No No No No No Yes No No No No No No No No No Yes No No No Yes Yes No No No No No l A AC A AD A A A AB ABC ABC A No No A A A ABC AB ABC A A A C No AB ABC No AD A k No F FT FT F FT No No T T No No No No No No No No T No No FT FT T T No No No No j O R R R R R R O C R O R R O O O O O C O O C C C R O O O O i''' Yes No No No No No Yes Yes Yes Yes Yes NF NF Yes Yes Yes Yes Yes Yes Yes Yes Yes No NF Yes Yes NF Yes Yes i'' IIB IIB IIA IIA IIA - - - - - - - IIC - i' T2 T4 T1 T2 T3 - - - - - - - T6 - -

h No Inert Inert No No No No No No No No No No No No No No No No No No No Pad+ine rt No No No No No No g Open Cont Cont Cont Cont Cont Cont Open Cont Cont Open Cont Cont Open Open Open Open Open Cont Open Open Cont Cont Cont Cont Open Open Open Open f 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 1G 2G 2G 2G 2G 2G 2G e 3 3 3 3 3 3 3 3 3 2 3 2 1 3 3 2 2 2 2 3 3 2 2 2 2 2(k) 3 2 1 d P S/P S/P S/P P S/P S/P P S/P S/P P S/P S/P P P P S/P P S/P P P S/P S/P S/P S/P S/P S/P S/P P c Z Y Y Z Y Y Y Y Z Y Z Y X Z Y Y Y Y Y Z Z Y Y Y Y Y Y Y X

a Butylene glycol 1,2-Butylene oxide n-Butyl ether Butyl methacrylate n-Butyl propionate Butyraldehyde (all isomers) Butyric acid gamma-Butyrolactone Calcium alkaryl sulphonate (C11-C50) Calcium alkyl (C10-C28) salicylate Calcium hydroxide slurry Calcium hypochlorite solution (15% or less) Calcium hypochlorite solution (more than 15%) Calcium lignosulphonate solutions Calcium long-chain alkyl(C5-C10) phenate Calcium long-chain alkyl(C11-C40) phenate Calcium long-chain alkyl phenate sulphide (C8-C40) Calcium long-chain alkyl salicylate (C13+) Calcium long-chain alkyl (C18-C28) salicylate Calcium nitrate/Magnesium nitrate/Potassium chloride solution epsilon-Caprolactam (molten or aqueous solutions) Carbolic oil Carbon disulphide Carbon tetrachloride Cashew nut shell oil (untreated) Castor oil Cesium formate solution (*) Cetyl/Eicosyl methacrylate mixture Chlorinated paraffins (C10-C13)

Bilaga

o 15.19 15.11.2, 15.11.4, 15.11.6, 15.11.7, 15.11.8, 15.12.3, 15.19, 16.2.9 15.19.6 15.12, 15.19.6 15.12, 15.19 15.19.6,16.2.9 15.12, 15.17, 15.18, 15.19, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.11.2, 15.11.3, 15.11.4, 15.11.6, 15.11.7, 15.11.8, 16.2.9 15.11.2, 15.11.3, 15.11.4, 15.11.5, 15.11.6, 15.11.7, 15.11.8, 15.12, 15.16.2, 15.19 15.19.6 15.19.6 15.19.6, 16.2.9 15.19.6 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.12.3, 15.12.4, 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.9 15.19.6 n No No No Yes No No No No No Yes No No No No No No No No No No No No No No No No No No No l A No AB No A No ABD ABD A No AB AB AB AB A A BD AD BD ABC ABC ABC A A ABC ABC AD AB AB k No No FT T FT No T No No T FT FT FT FT No No No FT No No No No No No No No T No No j O C R R C O C O O C R R R R O O R R R O O O O O O O R O O i''' Yes NF No NF No NF Yes Yes Yes NF No No No No Yes Yes Yes No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes i'' - IIA IIA IIA IIA IIA IIA IIA IIA IIA - - - - - - - IIA IIA i' - T1 T3 T4 T1 T1 T4 T2 T3 T2 - - - - - - - T2 T1

h No No No No No No No No No No No No No No No No No No No No No No No No No No No No No g Open Cont Cont Cont Cont Open Cont Open Open Cont Cont Cont Cont Cont Open Open Cont Cont Cont Open Open Open Open Open Open Open Cont Open Open f 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 1G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G e 1 2 2 3 2 2 2 2 3 1 2 2 2 2 3 3 2 2 2 2(k) 2(k) 2 2 2 2(k) 2(k) 2 2 2 d P S/P S/P S/P S/P P S/P P S/P S/P S/P S/P S/P S/P P P S/P S/P S/P S/P S/P S/P P P S/P S/P S/P S/P S/P c X Y Y Y Y Y Y Y Z Y Y Y Y Y Z Z X Y X Y Y Y Y Y Y Y X Y Y

a Chlorinated paraffins (C14-C17) (with 50% chlorine or more, and less than 1% C13 or shorter chains) Chloroacetic acid (80% or less) Chlorobenzene Chloroform Chlorohydrins (crude) 4-Chloro-2-methylphenoxyacetic acid, dimethylamine salt solution o-Chloronitrobenzene 1-(4-Chlorophenyl)-4,4- dimethyl-pentan-3-one 2- or 3-Chloropropionic acid Chlorosulphonic acid m-Chlorotoluene o-Chlorotoluene p-Chlorotoluene Chlorotoluenes (mixed isomers) Choline chloride solutions Citric acid (70% or less) Coal tar Coal tar naphtha solvent Coal tar pitch (molten) Cocoa butter Coconut oil Coconut oil fatty acid Coconut oil fatty acid methyl ester Copper salt of long chain (C17+) alkanoic acid Corn Oil Cotton seed oil Creosote (coal tar) Cresols (all isomers) Cresylic acid, dephenolized

Bilaga

o 15.19.6, 16.2.9 15.12, 15.17, 15.19.6 15.13, 15.19, 16.6.1, 16.6.2 15.19.6 15.19.6, 16.2.9 15.19.6, 16.2.9 15.19.6 15.19.6 15.19.6 15.19.6 15.19.6, 16.2.6, 16.2.9 15.19.6 15.19.6 15.19.6 15.19.6 16.2.9 15.19.6 15.13, 15.19, 16.6.1, 16.6.2 15.19.6, 16.2.9(e) 15.12.3, 15.12.4, 15.19.6, 16.2.9 15.19.6, 16.2.9 15.19.6, 16.2.6 15.19.6, 16.2.6 15.12.3, 15.12.4, 15.19.6, 16.2.9 15.12.3, 15.19 15.19.6 15.19.6, 16.2.9 15.19, 16.2.9 n No Yes No No No No No No No No No No No No No No No No No No No No No No No No No No No No l No A A A A AB A A A AC A A A A AB A A ACD A ABC A A AB AB ABC AC No ACD A ABC D k No FT T F F No FT FT F FT F F F F F No F No No T T F No No No T T FT No No j O R R R R O R R R R R R R R R O R O O R R R O O O R R R O O i''' Yes No Yes No No Yes No Yes No No No No No No No Yes No Yes Yes Yes Yes No Yes Yes Yes Yes NF No Yes Yes i'' IIB IIA IIA IIA IIA IIA IIB IIA IIA IIA IIA IIA IIA - IIA - - IIA i' T3 T4 T3 T2 T4 T3 T1 T2 T2 T2 T3 T3 T3 - T1 - - T2 -

h No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No g Open Cont Cont Cont Cont Open Cont Cont Cont Cont Cont Cont Cont Cont Cont Open Cont Open Open Cont Cont Cont Open Open Open Cont Cont Cont Open Open f 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G e 2 2 1 2 2 2 3 3 3 3 2 2 2 2 2 2 2 1 2 2 2 3 3 2 2 2 2 3 3 1 d S/P S/P S/P P P P S/P S/P P S/P P P P P P P P S/P P S/P S/P P P P S/P S/P S/P S/P P P c Y Y X X Y Y Z Y Y Y Y Y Y Y Y X X X Y Y X Z Z X Y Y Y Y Y X

a Cresylic acid, sodium salt solution Crotonaldehyde 1,5,9-Cyclododecatriene Cycloheptane Cyclohexane Cyclohexanol Cyclohexanone Cyclohexanone, Cyclohexanol mixture Cyclohexyl acetate Cyclohexylamine 1,3-Cyclopentadiene dimer (molten) Cyclopentane Cyclopentene p-Cymene Decahydronaphthalene Decanoic acid Decene Decyl acrylate Decyl alcohol (all isomers) Decyl/Dodecyl/Tetradecyl alcohol mixture Decyloxytetrahydrothiophene dioxide Diacetone alcohol Dialkyl (C8-C9) diphenylamines Dialkyl (C7-C13) phthalates Dialkyl (C9 - C10) phthalates Dialkyl thiophosphates sodium salts solution Dibromomethane Dibutylamine Dibutyl hydrogen phosphonate 2,6-Di-tert-butylphenol

Bilaga

o 15.19.6 15.19.6, 16.2.9 15.19.6 15.12.3, 15.17, 15.19.6 15.19.6 15.19.6 15.19.6 15.12, 15.17, 15.19 15.19.6 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.9 15.19.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.12, 15.19.6 15.12, 15.19.6 15.12, 15.17, 15.18, 15.19 15.12, 15.17, 15.18, 15.19 15.11.2, 15.11.4, 15.11.6, 15.11.7, 15.11.8, 15.19.6, 16.2.9 15.12, 15.13, 15.17, 15.19 16.2.6, 16.2.9 15.12, 15.19.6 15.19.6 15.19.6, 16.2.9 15.19.6 15.19.6, 16.2.6 15.19.6 15.4, 15.14, 15.19 n No No No Yes Yes No No No No No No No No No No Yes Yes No Yes No Yes No No No No No No No No Yes l A ABC ABD ABC A A AB ACD No A No No No AB AB AB ABD A ABC A A AC BCD A A A A A A A k No No T FT FT FT T T T T No No No FT FT FT FT No FT No FT FT No F No No No No No FT j O O R C R R R R R R O O O R R C C R C O R R O R O O O O O C i''' Yes Yes Yes No No No Yes Yes Yes Yes NF NF NF No No No No Yes No Yes No No Yes No Yes Yes Yes Yes Yes No i'' - IIA IIA IIA IIA - IIA IIA IIA IIA IIA IIB IIA IIA IIA IIA - - - IIA - IIB i' - T1 T1 T2 T2 - T1 T4 T1 T2 T2 T2 T1 T2 T2 T2 - - - T2 - T4

h No No No No No No No No No Dry No No No No No No No Dry Inert No No No No No No No No No No Inert g Open Open Cont Cont Cont Cont Cont Cont Cont Cont Open Open Open Cont Cont Cont Cont Cont Cont Open Cont Cont Open Cont Open Open Open Open Open Cont f 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 1G e 2 2 2 2 3 2 2 2 3 2 3 3 3 2 2 2 2 3 2 3 3 2 3 2 3 3 3 3 3 2 d P P S/P S/P S/P S/P S/P S/P S/P S/P S/P S/P S/P S/P S/P S/P S/P S/P S/P S/P S/P S/P S/P P S/P P P S/P P S/P c X Y X Y Z Y Y Y Y Y Y Y Y Y Y X X Y Y Y Y Y Y Y Z Z Y Y Z Z

88 a Dibutyl phthalate Dibutyl terephthalate Dichlorobenzene (all isomers) 3,4-Dichloro-1-butene 1,1-Dichloroethane Dichloroethyl ether 1,6-Dichlorohexane 2,2'-Dichloroisopropyl ether Dichloromethane 2,4-Dichlorophenol 2,4-Dichlorophenoxyacetic acid, diethanolamine salt solution 2,4-Dichlorophenoxyacetic acid, dimethylamine salt solution (70% or less) 2,4-Dichlorophenoxyacetic acid, triisopropanolamine salt solution 1,1-Dichloropropane 1,2-Dichloropropane 1,3-Dichloropropene Dichloropropene/Dichloropropane mixtures 2,2-Dichloropropionic acid Dicyclopentadiene, Resin Grade, 81-89% Diethanolamine Diethylamine Diethylaminoethanol 2,6-Diethylaniline Diethylbenzene Diethylene glycol dibutyl ether Diethylene glycol diethyl ether Diethylene glycol phthalate Diethylenetriamine Diethylenetriaminepentaacetic acid, pentasodium salt solution Diethyl ether

Bilaga

o 15.19.6 15.19.6 15.19.6 15.19.6 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6 15.19.6 15.19 15.19.6 15.12.3, 15.19.6 15.19.6 15.19.6 15.19.6 15.19.6 15.19.6, 16.2.6 16.2.9 15.12, 15.19 15.19.6 15.19.6 15.12, 15.17 15.12.1, 15.17 15.19.6, 16.2.9 15.12, 15.19.6 15.12, 15.17, 15.19 15.12, 15.14, 15.17, 15.19 15.12, 15.17, 15.19.6 15.12.3, 15.12.4, 15.19.6 15.19 15.19.6 15.19.6 15.19.6 n No No No No No No No No No No No No No No No No Yes No No No No No No Yes Yes No No No No No No l AB AD A A A A AB A AB ACD A A A A AB A A A A ACD B A ACD ACD ACD AC B B AD AD A k No No No T No No No No No FT F F No No No No FT No No T T No FT FT FT FT FT No FT FT No j O O O C O O O O O R R R O O O O C O O C R O R C C R R O R R O i''' Yes Yes Yes Yes Yes Yes Yes Yes Yes No No No Yes Yes Yes Yes No Yes Yes Yes Yes Yes No No No No No Yes No No Yes i'' IIB IIA IIA - IIA IIA - - IIA IIB IIB IIB IIA IIA IIA i' T4 T2 T2 - T2 T2 - - T2 T2 T2 T3 T3 T3 T2

h No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No g Open Open Open Cont Open Open Open Open Open Cont Cont Cont Open Open Open Open Cont Open Open Cont Cont Open Cont Cont Cont Cont Cont Open Cont Cont Open f 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G e 2 2 2 2 2 2 2 1 2 2 2 3 2 2 2 3 2 2 2 3 3 2 3 2 2 2 2 1 3 3 3 d P S/P P S/P P P P P P S/P P P P P P S/P S/P P P S/P S/P P S/P S/P S/P S/P S/P S/P S/P S/P P c Y Y Y Y X Y Y X Y Y Y Y X Y Y Z Y X Y Z Z X Y Y Y Y Y X Y Y Y

a Di-(2-ethylhexyl) adipate Di-(2-ethylhexyl) phosphoric acid Diethyl phthalate Diethyl sulphate Diglycidyl ether of bisphenol A Diglycidyl ether of bisphenol F Diheptyl phthalate Di-n-hexyl adipate Dihexyl phthalate Diisobutylamine Diisobutylene Diisobutyl ketone Diisobutyl phthalate Diisononyl adipate Diisooctyl phthalate Diisopropanolamine Diisopropylamine Diisopropylbenzene (all isomers) Diisopropylnaphthalene N,N-Dimethylacetamide N,N-Dimethylacetamide solution (40% or less) Dimethyl adipate Dimethylamine solution (45% or less) Dimethylamine solution (greater than 45% but not greater than 55%) Dimethylamine solution (greater than 55% but not greater than 65%) N,N-Dimethylcyclohexylamine Dimethyl disulphide N,N-Dimethyldodecylamine Dimethylethanolamine Dimethylformamide Dimethyl glutarate 89

Bilaga

o 15.12.1, 15.19.6 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.9 15.19.6 16.2.9 16.2.9 15.12, 15.17, 15.19, 15.21, 16.2.6, 16.2.9, 16.6.4 15.19.6 15.19.6 15.12, 15.19, 16.2.9 15.19.6 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19, 16.2.6 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.9 15.19.6, 16.2.9 15.19.6, 16.2.9 15.12, 15.16.2, 15.17, 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.12.3, 15.19.6 15.19.6, 16.2.9 15.19.6, 16.2.6 15.19.6 15.19.6, 16.2.6, 16.2.9 15.19.6 15.12, 15.17, 15.19 15.19.6 15.19.6, 16.2.9 n No No No No No No No No No No No No No No No No No No No No No No No No No No No Yes No No l AD A A AB AB A A A AB A A B BD A A B A A ABC (b)D A A A AD A A AB AB ABD A A k T No No No No No T No No FT F No No No No No No No T(a) No FT No No No No No F T No No j R O O O O O C O O C R O O O O O O O C O R O O O O O R C O O i''' Yes Yes Yes Yes Yes Yes Yes Yes Yes No No Yes Yes Yes Yes Yes Yes Yes Yes (a) Yes No Yes Yes Yes Yes Yes No Yes Yes Yes i'' - - IIB IIA - - IIB - - IIA i' - - T2 T3 - - T3 - - T3 -

h No No No No No No No No No No No No No No No No No No Dry No No No No No No No No No No No g Cont Open Open Open Open Open Cont Open Open Cont Cont Open Open Open Open Open Open Open Cont Open Cont Open Open Open Open Open Cont Cont Open Open f 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G e 3 2 3 3 3 3 2 2 2 2 3 2 2 1 2 2 2 2 2 2 2 3 2 2 2 2 2 1 2 2 d S/P P P P P P S/P P P S/P P P P S/P P P P P S/P P S/P P P S/P S/P P P S/P P P c Y Y Y Y Z Y X Y X Y Y X Y Y Y X X X Y X Y Z X Y Y Y Y X X Y

a Dimethyl hydrogen phosphite Dimethyl octanoic acid Dimethyl phthalate Dimethylpolysiloxane 2,2-Dimethylpropane-1,3-diol (molten or solution) Dimethyl succinate Dinitrotoluene (molten) Dinonyl phthalate Dioctyl phthalate 1,4-Dioxane Dipentene Diphenyl Diphenylamine (molten) Diphenylamine, reaction product with 2,2,4-Trimethylpentene Diphenylamines, alkylated Diphenyl/Diphenyl ether mixtures Diphenyl ether Diphenyl ether/Diphenyl phenyl ether mixture Diphenylmethane diisocyanate Diphenylol propane-epichlorohydrin resins Di-n-propylamine Dipropylene glycol Dithiocarbamate ester (C7-C35) Ditridecyl adipate Ditridecyl phthalate Diundecyl phthalate Dodecane (all isomers) tert-Dodecanethiol Dodecene (all isomers) Dodecyl alcohol

Bilaga

o 15.19.6, 16.2.9 15.19.6, 16.2.6 15.19.6 15.13 15.13, 15.19.6, 16.2.6, 16.6.1, 16.6.2 15.13, 15.19.6, 16.6.1, 16.6.2 15.19.6, 16.2.6 15.19.6, 16.2.6 15.19.6 15.12, 15.17, 15.19 16.2.9 15.19.6 15.19.6, 16.2.9 15.12, 15.17, 15.19, 16.2.6, 16.2.9 15.13, 15.19.6, 16.6.1, 16.6.2 15.12, 15.14, 15.19.6 15.12, 15.14, 15.17, 15.19 15.19.6 15.19.6 15.19.6 15.19.6 15.19.6 15.19.6 16.2.9 15.12, 15.17, 15.19 15.19.6 n No No No No No No No No No No No Yes No No No Yes No No Yes Yes Yes No No No No No No No Yes No l AD AB No A A A AD A AB No A A A A AB ABC AB A A CD AC A A A A A A A AD A k T No No No No No No No No No No FT FT F No T F No FT FT FT F F F F F FT No FT No j R O O O O O O O O O O C O R O C R O R C C R R R R R R O C O i''' Yes Yes NF Yes Yes Yes Yes Yes Yes Yes Yes No Yes No Yes Yes No Yes No No No No No No No No No Yes No Yes i'' - - IIB IIA IIA - - IIA IIB IIA IIA IIA IIA IIB IIA IIA IIB IIA IIB i' - - T2 T2 T2 - - T2 T2 T2 T2 T2 T2 T2 T4 T4 T3 T2

h No No No No No No No No No No No No No No No Inert No No No No No No No No No No No No No No g Cont Open Open Open Open Open Open Open Open Open Open Cont Open Cont Open Cont Cont Open Cont Cont Cont Cont Cont Cont Cont Cont Cont Open Cont Open f 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 1G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G e 2 3 2 2 3 2 2 2 2 2 3 2 3 3 2 2 3 3 2 2 2 3 2 3 3 2 2 2 2 3 d S/P P S/P P S/P S/P S/P P P P P S/P S/P P S/P S/P P P S/P S/P S/P P P P P P S/P P S/P S/P c Y Z X X Z Y Y X Y X Z Y Y Y Y X Z Z Y Y Y Y Y Y Y Y Y Y Y Y

a Dodecylamine/Tetradecylamine mixture Dodecylbenzene Dodecyl diphenyl ether disulphonate solution Dodecyl hydroxypropyl sulphide Dodecyl methacrylate Dodecyl/Octadecyl methacrylate mixture Dodecyl/Pentadecyl methacrylate mixture Dodecyl phenol Dodecyl Xylene Drilling brines (containing zinc salts) Drilling brines, including:calcium bromide solution, calcium chloride solution and sodium chloride solution Epichlorohydrin Ethanolamine 2-Ethoxyethyl acetate Ethoxylated long chain (C16+) alkyloxyalkylamine Ethoxylated tallow amine (> 95%) Ethyl acetate Ethyl acetoacetate Ethyl acrylate Ethylamine Ethylamine solutions (72% or less) Ethyl amyl ketone Ethylbenzene Ethyl tert-butyl ether Ethyl butyrate Ethylcyclohexane N-Ethylcyclohexylamine S-Ethyl dipropylthiocarbamate Ethylene chlorohydrin Ethylene cyanohydrin

Bilaga

o 15.19.6, 16.2.9 15.19.6 15.12, 15.19.6, 16.2.9 15.19 15.19.6 15.19.6 15.19.6 15.19.6 15.19.6 15.19.6, 16.2.9 16.2.9 16.2.9 15.8, 15.12, 15.14, 15.19 15.19.6, 16.2.6, 16.2.9 15.19.6 15.19.6 15.13, 15.19.6, 16.6.1, 16.6.2 15.12, 15.19.6 15.19.6, 16.2.6, 16.2.9 15.12.1, 15.19.6 15.13, 15.19.6, 16.6.1, 16.6.2 15.12.3, 15.17, 15.19 15.19.6 15.19.6, 16.2.9 15.19.6 15.19.6, 16.2.9 15.12.3, 15.12.4, 15.19.6, 16.2.6, 16.2.9 15.12.3, 15.12.4, 15.19, 16.2.6, 16.2.9 15.12.3, 15.12.4, 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6 n No No Yes No No No No No No No No No No No No No No No No No No Yes No No No No No No No No l A A No AB A A A A A A A A AC A A AB A A AB AD AD AC A A A AB ABC ABC ABC ABC k FT No T FT No No No No No F No No FT No No No No FT No FT FT F F FT F No T T T No j R O C R O O O O O R O O C O R O O R O R R C R R R O R R R O i''' No Yes NF No Yes Yes Yes Yes Yes No Yes Yes No Yes No Yes Yes No Yes No No No No No No Yes Yes Yes Yes Yes i'' IIA - IIA - IIB - - IIB - IIA IIB IIA IIB IIA IIB IIA IIA IIA - - - i' T2 - T2 - T2 - - T2 - T2 T3 T3 T3 T2 T2 T1 T3 T4 - - - -

h No No No No No No No No No No No No Inert No No No No No No No No No No No No No No No No No g Cont Open Cont Cont Open Open Open Open Open Cont Open Open Cont Open Cont Open Open Cont Open Cont Cont Cont Open Cont Cont Open Cont Cont Cont Open f 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 1G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G e 2 3 2 2 3 3 3 3 3 3 3 3 2 3 3 3 3 2 2 2 3 2 3 3 2 2 2 2 2 2 d S/P S/P S/P S/P P P P P P S/P P P S/P P P P S/P S/P P S/P S/P S/P P S/P P P S/P S/P S/P P c Y Y Y Y Y Y Y Y Y Y Z Z Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y

92 a Ethylenediamine Ethylenediaminetetraacetic acid, tetrasodium salt solution Ethylene dibromide Ethylene dichloride Ethylene glycol Ethylene glycol acetate Ethylene glycol butyl ether acetate Ethylene glycol diacetate Ethylene glycol methyl ether acetate Ethylene glycol monoalkyl ethers Ethylene glycol phenyl ether Ethylene glycol phenyl ether/Diethylene glycol phenyl ether mixture Ethylene oxide/Propylene oxide mixture with an ethylene oxide content of not more than 30% by mass Ethylene-vinyl acetate copolymer (emulsion) Ethyl-3-ethoxypropionate 2-Ethylhexanoic acid 2-Ethylhexyl acrylate 2-Ethylhexylamine 2-Ethyl-2-(hydroxymethyl) propane-1,3-diol (C8-C10) ester Ethylidene norbornene Ethyl methacrylate N-Ethylmethylallylamine Ethyl propionate 2-Ethyl-3-propylacrolein Ethyl toluene Fatty acid (saturated C13+) Fatty acid methyl esters (m) Fatty acids, (C8-C10) Fatty acids, (C12+) Fatty acids, (C16+)

Bilaga

o 15.19.6 15.11, 15.19.6, 16.2.9 15.11, 15.19 15.19.6, 16.2.6, 16.2.9 15.11, 15.19.6 15.19.6, 16.2.9 15.19.6, 16.2.9 15.11.2, 15.11.3, 15.11.4, 15.11.6, 15.11.7, 15.11.8, 15.12.3, 15.12.4, 15.19.6, 16.2.9 15.11.2, 15.11.3, 15.11.4, 15.11.6, 15.11.7, 15.11.8, 15.12.3, 15.12.4, 15.19.6, 16.2.9 15.11.2, 15.11.3, 15.11.4, 15.11.6, 15.11.7, 15.11.8, 15.12.3, 15.12.4, 15.19.6 15.19.6 15.19.6 15.12.3, 15.12.4, 15.19.6 15.19.6 15.19.6, 16.2.6, 16.2.9 15.12.3, 15.12.4, 15.19.6 15.19.6 15.19.6, 16.2.9 15.19.6, 16.2.9 15.11.2, 15.11.3, 15.11.4, 15.11.6, 15.11.7, 15.11.8, 15.19.6, 16.2.9, 16.6.1, 16.6.2, 16.6.3 15.19.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.9 15.19.6 n No No Yes No Yes Yes No Yes Yes No No No No No No No No No No No No No No No No No No No No l AB No No ABC No A A A A AC A A ABC No A ABC ABC ABC AB A A No A ACD A ABC A AB A k No No T No T FT No T(g) FT (g) T(g) FT No T No No T No No No No No No No No No No F No F j O O R O R R O R R R R O R O O R O O O O O O O O O O R O R i''' Yes NF NF Yes NF No Yes Yes No Yes No Yes Yes NF Yes Yes Yes Yes Yes Yes Yes NF Yes Yes Yes Yes No Yes No i'' - - IIB - IIA - IIB - - - - - - - - IIA IIA i' - - T2 - T1 - T2 - - - - - - - - T3 T3

h No No No No No No No No No No No No No No No No No No No No No No No No No No No No No g Open Open Cont Open Cont Cont Open Cont Cont Cont Cont Open Cont Open Open Cont Open Open Open Open Open Open Open Open Open Open Cont Open Cont f 2G 2G 2G 2G 1G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G e 2 3 2 2(k) 3 3 3 3 3 3 3 3 3 3 2 3 3 3 3 2 3 3 3 3 2 2(k) 2 3 3 d P S/P S/P S/P S/P S/P P S/P S/P S/P S/P P S/P S/P P S/P P P P P P S/P P S/P P P P P P c Y Y Y Y Y Y Y Y Y Z Y Y Z Y Y Z Z Z Z Y Z Z Y Y Y Y X Z Y

a Fatty acids, essentially linear (C6-C18) 2-ethylhexyl ester Ferric chloride solutions Ferric nitrate/Nitric acid solution Fish oil Fluorosilicic acid (20-30%) in water solution Formaldehyde solutions (45% or less) Formamide Formic acid (85% or less acid) Formic acid (over 85%) Formic acid mixture (containing up to 18% propionic acid and up to 25% sodium formate) Furfural Furfuryl alcohol Glucitol/glycerol blend propoxylated (containing less than 10% amines) Glutaraldehyde solutions (50% or less) Glycerol monooleate Glycerol propoxylated Glycerol, propoxylated and ethoxylated Glycerol/sucrose blend propoxylated and ethoxylated Glyceryl triacetate Glycidyl ester of C10 trialkylacetic acid Glycine, sodium salt solution Glycolic acid solution (70% or less) Glyoxal solution (40% or less) Glyoxylic acid solution (50 % or less) Glyphosate solution (not containing surfactant) Groundnut oil Heptane (all isomers) n-Heptanoic acid Heptanol (all isomers) (d) 93

Bilaga

o 15.19.6 15.19.6 15.19.6, 16.2.6 15.12, 15.17, 15.18, 15.19, 16.2.9 15.19.6 15.12, 15.16.2, 15.17, 15.18, 15.19 15.19.6 15.19.6 15.12.3, 15.12.4, 15.19.6, 16.2.9 15.19.6 15.19.6 15.19.6 15.19.6 15.11 15.5.1, 15.19.6 15.5.2, 15.18, 15.19.6 15.12, 15.13, 15.19.6, 16.6.1, 16.6.2 15.19.6 15.19.6, 16.2.6, 16.2.9 15.12, 15.13, 15.17, 16.6.1, 16.6.2 15.19.6 16.2.9 15.12, 15.16.2, 15.17, 15.19.6 15.13, 15.14, 15.19.6, 16.6.1, 16.6.2 n No No No Yes No No Yes No No No No No No No No Yes No No No No No No No No No No No No No No l A A AB AC A A AC (b)D A AC A A AB AB A A No No No A A A ABC AB AB AB A A A ABD B k F No No T No T T No FT F No No No F F T No No T No No No F F F F No T T F j R O O C O R C O R R O O O R R R C C C O O O R R R R R R C R i''' No Yes Yes Yes Yes Yes Yes Yes No No Yes Yes Yes No No NF NF NF Yes Yes Yes Yes No No No No Yes Yes Yes No i'' IIA - IIB IIB IIA - IIA IIA - IIA IIA IIA IIA IIB i' T4 - T1 T4 T3 - T3 T2 - T2 T2 T4 T2 T3

h No No No No No No Dry No No No No No No No No No No No No No No No No No No No No No Dry No g Cont Open Open Cont Open Cont Cont Open Cont Cont Open Open Open Cont Cont Cont Cont Cont Cont Open Open Open Cont Cont Cont Cont Cont Cont Cont Cont f 2G 2G 2G 2G 2G 2G 1G 2G 2G 2G 2G 2G 2G 2G 2G 1G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G e 3 2 2 2 3 3 2 3 2 2 3 3 3 3 2 3 2 3 2 3 3 2(k) 3 3 3 3 3 3 2 3 d P P P S/P P S/P S/P P S/P P P P P P P S/P S/P S/P S/P P P P P P P P S/P S/P S/P S/P c Y Y Y Y Z Y Y Z Y Y Y Y Y Y Y Z Y Y Y Y Z Y Z Z Z Z Y Y X Y

a Heptene (all isomers) Heptyl acetate 1-Hexadecylnaphthalene / 1,4-bis(hexadecyl)naphthalene mixture Hexamethylenediamine (molten) Hexamethylenediamine adipate (50% in water) Hexamethylenediamine solution Hexamethylene diisocyanate Hexamethylene glycol Hexamethyleneimine Hexane (all isomers) 1,6-Hexanediol, distillation overheads Hexanoic acid Hexanol Hexene (all isomers) Hexyl acetate Hydrochloric acid Hydrogen peroxide solutions (over 60% but not over 70% by mass) Hydrogen peroxide solutions (over 8% but not over 60% by mass) 2-Hydroxyethyl acrylate N-(Hydroxyethyl)ethylenediaminetriacetic acid, trisodium salt solution 2-Hydroxy-4-(methylthio)butanoic acid Illipe oil Isoamyl alcohol Isobutyl alcohol Isobutyl formate Isobutyl methacrylate Isophorone Isophoronediamine Isophorone diisocyanate Isoprene

Bilaga

o 15.19.6, 16.2.6, 16.2.9 15.12, 15.14, 15.19 15.12, 15.19.6, 16.2.9 15.19.6, 16.2.9 15.4.6, 15.13.3, 15.19.6 15.19.6, 16.2.6 15.12, 15,13, 15.17, 15.18, 15.19, 16.6.1, 16.6.2, 16.6.3 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 16.2.9 15.19.6, 16.2.6, 16.2.9 16.2.9 15.19.6, 16.2.6, 16.2.9 15.12, 15.19.6, 20.5.1 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.9 15.19.6 15.12, 15.17, 15.19 15.13, 15.19.6, 16.2.9, 16.6.1 n No No Yes Yes No No No No Yes No No No No No No No Yes No No No No No No No No No No No Yes No l A AB CD CD A A ABC A ACD ABC A A A AC A ABC A AB A A A A A AB AC (f) ABC No A No A k FT F FT FT F F No No T No No No No No No No FT No No No No No No No No No No FT T T j O R C C R R O O C O O O O O O O C O O O O O O O R O O R C R i''' Yes No No No No No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No Yes Yes Yes Yes Yes Yes Yes Yes Yes NF No NF Yes i'' IIA IIA IIA IIA IIA IIA - - - - - - - - - - - IIB i' T2 T1 T2 T2 T4 T2 - - - - - - - - - - - T2 -

h No No No No No Inert No No No No No No No No No No No No No No No No No No No No No No No No g Open Cont Cont Cont Cont Cont Open Open Cont Open Open Open Open Open Open Open Cont Open Open Open Open Open Open Open Cont Open Open Cont Cont Cont f 2G 2G 2G 2G 2G 2G 2G 2G 1G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G e 3 3 2 2 2 3 2(k) 3 2 2(k) 3 3 2 3 3 2(k) 2 2 2 2 3 3 2 2 3 2(k) 2 3 2 3 d S/P P S/P S/P P S/P P P S/P S/P S/P P P P P S/P S/P P P P P P P P S/P P S/P S/P S/P S/P c Y Z Y Y Y Y Y Z Y Y Y Z X Z Z Y X Y Y Y Z Z Y Y Y Y X Z X Y

a Isopropanolamine Isopropyl acetate Isopropylamine Isopropylamine (70% or less) solution Isopropylcyclohexane Isopropyl ether Jatropha oil Lactic acid Lactonitrile solution (80% or less) Lard Latex, ammonia (1% or less)- inhibited Latex: Carboxylated styrene-Butadiene copolymer; Styrene-Butadiene rubber Lauric acid Ligninsulphonic acid, magnesium salt solution Ligninsulphonic acid, sodium salt solution Linseed oil Liquid chemical wastes Long-chain alkaryl polyether (C11-C20) Long-chain alkaryl sulphonic acid (C16-C60) Long-chain alkylphenate/Phenol sulphide mixture L-Lysine solution (60% or less) Magnesium chloride solution Magnesium long-chain alkaryl sulphonate (C11-C50) Magnesium long-chain alkyl salicylate (C11+) Maleic anhydride Mango kernel oil Mercaptobenzothiazol, sodium salt solution Mesityl oxide Metam sodium solution Methacrylic acid

Bilaga

o 16.2.9 15.19, 16.2.9 15.12, 15.13, 15.17, 15.19 15.19.6 15.19, 16.2.6 15.13, 15.19.6, 16.6.1, 16.6.2 15.19.6 15.12, 15.17, 15.19 15.19.6 15.19.6 15.19.6 15.12.3, 15.12.4, 15.19.6 15.12, 15.17, 15.19, 16.2.6, 16.2.9 15.19.6, 16.2.9 15.19.6 15.19.6 15.19.6 15.19.6 15.12, 15.18, 15.19, 16.2.9 15.19.6, 16.2.6 15.19.6 15.19.6 15.12, 15.14, 15.19 15.12, 15.17, 15.19 n No No Yes No No No No No Yes No Yes No No No No Yes No No No No No No No Yes No No No No Yes Yes l AC AB A A AB A A A A A ACD A A A ABC ABC A AB AB A A A B ABC D A AD A AD A ABC k No FT FT F No No F No FT F FT F F F T T F F F F F F F T No No F No FT T j O R C R O O R O R R C R R R R C R R R R R R R C O O R O R C i''' NF No No No Yes Yes No Yes No No No No No No Yes Yes No No No No No No No Yes Yes Yes No Yes No Yes i'' - IIA IIA IIA IIA IIB IIA IIA IIA IIA IIA - - IIA IIA IIA IIB IIA IIA IIB - IIA IIA IIA i' - T2 T1 T2 T1 T1 T1 T2 T2 T2 T2 - - T4 T1 T2 T4 T4 T3 T4 - T1 T1 -

h No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No g Open Cont Cont Cont Open Open Cont Open Cont Cont Cont Cont Cont Cont Cont Cont Cont Cont Cont Cont Cont Cont Cont Cont Open Open Cont Open Cont Cont f 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 1G 2G 2G 2G 2G 2G 2G e 3 2 2 3 3 1 3 3 2 3 2 2 3 3 2 2 3 3 3 3 3 2 2 1 3 3 3 3 2 2 d S/P S/P S/P P P P P P S/P P S/P P P P S/P S/P P P P P P P P S/P S/P S/P P S/P S/P S c Z Y Y Z Y X Z Z Y Y Y Y Z Z Y Y Y Z Y Z Y Y Y X Y Y Z Y Z Z

a Methacrylic acid - alkoxypoly (alkylene oxide) methacrylate copolymer, sodium salt aqueous solution (45% or less) Methacrylic resin in ethylene dichloride Methacrylonitrile 3-Methoxy-1-butanol 3-Methoxybutyl acetate N-(2-Methoxy-1-methyl ethyl)-2-ethyl-6-methyl chloroacetanilide Methyl acetate Methyl acetoacetate Methyl acrylate Methyl alcohol Methylamine solutions (42% or less) Methylamyl acetate Methylamyl alcohol Methyl amyl ketone N-Methylaniline alpha-Methylbenzyl alcohol with acetophenone (15% or less) Methylbutenol Methyl tert-butyl ether Methyl butyl ketone Methylbutynol Methyl butyrate Methylcyclohexane Methylcyclopentadiene dimer Methylcyclopentadienyl manganese tricarbonyl Methyl diethanolamine 2-Methyl-6-ethyl aniline Methyl ethyl ketone 2-Methyl-5-ethyl pyridine Methyl formate 2-Methylglutaronitrile with 2-Ethylsuccinonitrile (12% or less)

Bilaga

o 15.19.6, 16.2.9 15.13, 15.19.6, 16.6.1, 16.6.2 15.19.6 15.12.3, 15.19.6 15.12.3, 15.19 15.12.3, 15.19, 16.2.9 15.19.6 15.19.6 15.13, 15.19.6, 16.6.1, 16.6.2 15.12, 15.17, 15.19 15.12, 15.17, 15.19, 16.2.6, 16.2.9 15.19.6 15.6, 15.12, 15.18, 15.19 15.19.6, 16.2.9 15.19.6, 16.2.9 16.2.9 15.19.6 15.11, 15.16.2, 15.17, 15.19 15.11, 15.19 15.11, 15.19 15.19.6 15.12, 15.17, 15.18, 15.19, 16.2.9 15.19.6, 16.6.1, 16.6.2, 16.6.4 15.19.6, 16.6.1, 16.6.2, 16.6.3 15.19.6, 16.2.6, 16.6.1, 16.6.2, 16.6.3 15.12, 15.19.6, 16.2.6, 16.2.9 15.19.6 n No No No No No No No No No No No No Yes Yes No Yes No No No No Yes Yes Yes No No No No No No No l ABD AB A A AD A A AC A A A AD (j) BC ABC A AC A AD A A No No No A AD A(f) A(f) A AD A k FT F FT No No No F F FT No No FT FT T F FT F No No No T T T No T FT FT F T FT j R R R O R O C C C O O R C C R C R R O O C C R O C R R R C R i''' No No No Yes Yes Yes No No No Yes Yes No No Yes No No No Yes Yes Yes NF NF NF Yes Yes No No No Yes No i'' IIA IIA IIA - IIA IIA IIA IIB IIA - IIA IIA IIA IIA - IIA IIB IIB IIB IIB i' T3 T1 T2 - T1 T1 T1 T1 T3 - T2 T4 T3 T1 - T1 T2 T2 T2 T2

h No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No g Cont Cont Cont Open Cont Open Cont Cont Cont Open Open Cont Cont Cont Cont Cont Cont Cont Open Open Cont Cont Cont Open Cont Cont Cont Cont Cont Cont f 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 1G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G e 3 3 2 3 2 3 2 2 2 3 3 2 2 2 3 1 2 2 3 2 2 2 2 3 2 3 3 3 2 3 d S/P P S/P P S/P P S/P S/P S/P P P S/P S/P S/P S/P S/P P S/P P P S/P S/P S/P P S/P S/P S/P S/P S/P S/P c Z Z Y Z X Z Z Z Z Y Y Y Y Y Y X X X Z Y Y Y Y Y Y Y Y Y Y Y

a 2-Methyl-2-hydroxy-3-butyne Methyl isobutyl ketone Methyl methacrylate 3-Methyl-3-methoxybutanol Methyl naphthalene (molten) 2-Methyl-1,3-propanediol 2-Methylpyridine 3-Methylpyridine 4-Methylpyridine N-Methyl-2-pyrrolidone Methyl salicylate alpha-Methylstyrene 3-(methylthio)propionaldehyde Molybdenum polysulfide long chain alkyl dithiocarbamide complex Morpholine Motor fuel anti-knock compound (containing lead alkyls) Myrcene Naphthalene (molten) Naphthalenesulphonic acid-Formaldehyde copolymer, sodium salt solution Neodecanoic acid Nitrating acid (mixture of sulphuric and nitric acids) Nitric acid (70% and over) Nitric acid (less than 70%) Nitrilotriacetic acid, trisodium salt solution Nitrobenzene Nitroethane Nitroethane(80%)/ Nitropropane(20%) Nitroethane, 1-Nitropropane (each 15% or more) mixture o-Nitrophenol (molten) 1- or 2-Nitropropane

Bilaga

o 15.19.6 15.12, 15.17, 15.19.6 15.19.6 15.19.6, 16.2.9 15.12.3, 15.12.4, 15.19.6, 16.2.6, 16.2.9 15.19.6 15.19.6 15.19.6, 16.2.9 15.19, 16.2.6, 16.2.9 15.19.6, 16.2.6 15.19, 16.2.6 15.19, 16.2.6 15.19, 16.2.6 15.19, 16.2.6 15.19, 16.2.6, 16.2.9(l) 15.19, 16.2.6, 16.2.9(l) 15.19, 16.2.6, 16.2.9(l) 15.19, 16.2.6, 16.2.9(l) 15.19.6, 16.2.9 15.19.6 15.19.6 15.19.6 15.19.6, 16.2.9 15.19.6, 16.2.9 15.19.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.13, 15.19.6 15.19.6 n No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No l A(f) AB BC AB ABC A A AB A A A A A A A A A A A A AC A A A A A A A AB ABC A k FT T F No No F No No No No No F No F No F No F No F F F No No F No F No No F F j R C R O R R O O O O O R O R O R O R O R R R O O R O R O O R R i''' No Yes No Yes Yes No Yes Yes Yes Yes Yes No Yes No Yes No Yes No Yes No No No Yes Yes No Yes No Yes Yes No No i'' IIB IIB IIA - IIA - - IIA IIA IIA - IIA IIA IIA IIA - IIA IIB - IIB IIA i' T4 T4 - T3 - - T3 - T3 - T3 - T3 - T3 T2 T3 - T3 T4 - T3 T3

h No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No No g Cont Cont Cont Open Cont Cont Open Open Open Open Open Cont Open Cont Open Cont Open Cont Open Cont Cont Cont Open Open Cont Open Cont Open Open Cont Cont f 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G e 3 2 2 3 2 2 2 2 1 2 1 1 2 2 2 2 3 3 3 3 2 2 3 2 2 3 2 2 2 2 3 d S/P S/P P P S/P P P P P P P P P P P P P P P P P P P P P P P P P S/P P c Y Y X Y Y Y Y Y X Y X X X X Y Y Y Y Z Z Y X Y Y Y Y Y Y Y X Y

, Bilaga

o 15.19.6 15.19.6, 16.2.9 15.19.6, 16.2.9 15.19.6, 16.2.9 15.11.2 to 15.11.8, 15.12.1, 15.16.2, 15.17, 15.19 16.2.6 15.19.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.9 15.12.3, 15.19 15.12, 15.17, 15.19.6 15.13, 15.19.6, 16.6.1, 16.6.2, 16.6.3 15.12, 15.13, 15.17, 15.19 15.19 15.14, 15.19.6 15.19.6 15.11.2, 15.11.3, 15.11.4, 15.11.6, 15.11.7, 15.11.8, 15.12.3, 15.19 n No No No No Yes No No No No No No No No No No No No No No No No No No No No Yes Yes No No No l A AB A AB No A ABC ABC ABC ABC ABC ABC ABC ABC ABC ABC ABC A ABC ABC AB A A No AB ABC B A AB AD k F No F No T T No No No No No T No No No No No No No No No F FT T FT FT No F No No j R O R O C R O O O O O R O O O O O O O O O R C R R C O R O C i''' No Yes No Yes NF Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No No NF No No Yes No Yes Yes i'' IIA IIA - - - - - - - - - - - - - IIB IIB IIA IIB IIA i' T3 T4 - - - - - - - - - - - - - T3 T4 T1 T3 T2 T2

h No No No No No No No No No No No No No No No No No No No No No No No No No Inert No No No No g Cont Open Cont Open Cont Cont Open Open Open Open Open Cont Open Open Open Open Open Open Open Open Open Cont Cont Cont Cont Cont Open Cont Open Open f 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G e 2 2 2 2 2 2 2(k) 3 2 2 2 2 2(k) 2(k) 2(k) 2(k) 2(k) 2 2(k) 2(k) 2 3 2 2 3 2 2 3 3 2 d P P P P S/P S/P S/P S/P S/P S/P S/P S/P S/P P P P S/P P P P P S/P S/P S/P S/P S/P S/P P P S/P c X Y X Y Y X Y Z Y Y Y Y Y Y Y Y Y Y Y Y Y Z Y Y Y Y X Y Y Y

a Olefin mixtures (C5-C15) Olefins (C13+, all isomers) alpha-Olefins (C6-C18) mixtures Oleic acid Oleum Oleylamine Olive oil Oxygenated aliphatic hydrocarbon mixture Palm acid oil Palm fatty acid distillate Palm kernel acid oil Palm kernel fatty acid distillate Palm kernel oil Palm kernel olein Palm kernel stearin Palm mid-fraction Palm oil Palm oil fatty acid methyl ester Palm olein Palm stearin Paraffin wax Paraldehyde Paraldehyde-ammonia reaction product Pentachloroethane 1,3-Pentadiene 1,3-Pentadiene (greater than 50%), cyclopentene and isomers, mixtures Pentaethylenehexamine Pentane (all isomers) Pentanoic acid n-Pentanoic acid (64%)/2-Methyl butyric acid (36%) mixture 99

Bilaga

o 15.14, 15.19.6 15.19.6 15.12.1, 15.12.2, 15.19.6 15.19.6, 16.2.6, 16.2.9 15.12, 15.19, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.11.1, 15.11.2, 15.11.3, 15.11.4, 15.11.6, 15.11.7, 15.11.8, 16.2.9 15.7, 15.19, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6 15.19.6 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6,16.2.9 15.19.6, 16.2.6 15.19.6 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6 15.19.6, 16.2.6, 16.2.9 15.19, 16.2.6, 16.2.9 15.19.6, 16.2.6 16.2.9 15.19.6 15.19.6, 16.2.9 n No No No No No No No No Yes No No No No No No No No No No No No No No No No No No No No l A A No A A AB A No C AD A A A AC AB ABC A A AB AB A A AD A A A AC A A k F F T No T No F No No No F F No No F No No No No No No No No No No No No No No j R R R O C O R O C R R R O O R O O O O O O O R O O O O O O i''' No No NF Yes Yes Yes No NF No (c) Yes No No Yes Yes No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes i'' IIA IIA - IIA IIB IIA IIA IIB - IIB - - - - - - - i' T3 T4 - T1 T4 T1 T3 T4 - T4 - - - - - - - -

h No No No No No No No No Pad+ (vent or inert) No No No No No No No No No No No No No No No No No No No No g Cont Cont Cont Open Cont Open Cont Open Cont Cont Cont Cont Open Open Cont Open Open Open Open Open Open Open Cont Open Open Open Open Open Open f 2G 2G 2G 2G 2G 2G 2G 2G 1G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G e 3 3 2 2 2 3 2 3 1 2 2 2 2 3 2 2 3 2 2 2 2 2 1 2 3 3 3 2 2 d P P S/P P S/P P P S/P S/P S/P P P P S/P P P P P P P P P P P P P P S/P S/P c Y Y Y Y Y Y Y Z X Y X X X Z Y Y Z Y Y Y Y Y X Y Z Z Z Y Y

100 a Pentene (all isomers) n-Pentyl propionate Perchloroethylene Petrolatum Phenol 1-Phenyl-1-xylyl ethane Phosphate esters, alkyl (C12-C14) amine Phosphoric acid Phosphorus, yellow or white Phthalic anhydride (molten) alpha-Pinene beta-Pinene Pine oil Polyacrylic acid solution (40% or less) Polyalkyl (C18-C22) acrylate in xylene Polyalkylalkenaminesuccinimide, molybdenum oxysulphide Poly(2-8)alkylene glycol monoalkyl(C1-C6) ether Poly(2-8)alkylene glycol monoalkyl (C1-C6) ether acetate Polyalkyl (C10-C20) methacrylate Polyalkyl (C10-C18) methacrylate/ethylene-propylene copolymer mixture Polybutene Polybutenyl succinimide Poly(2+)cyclic aromatics Polyether (molecular weight 1350+) Polyethylene glycol Polyethylene glycol dimethyl ether Poly(ethylene glycol) methylbutenyl ether (MW>1000) Polyethylene polyamines Polyethylene polyamines (more than 50% C5 -C20 paraffin oil)

Bilaga

o 15.19.6 16.2.9 15.19.6 15.19.6, 16.2.9 15.12, 15.16.2, 15.19.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.9 15.19.6 15.19.6, 16.2.9 16.2.9 15.19.6 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.9 15.19.6, 16.2.9 15.19.6 15.19.6 15.17, 15.19.6 n No No No No No No No No No No No No No No No No No No No No No No No No No No No No No Yes l No AC A AB AB A A AB AB ABC A A A A AB AB AB AB A A ABC AB A No A No AD No A A k No No No No No T(a) No No No No No F F No No No No No No No No F No No No No No No T FT j O O O O O C O O O O O R R O O O O O O O O R O O O O O O R R i''' NF NF Yes Yes Yes Yes (a) Yes Yes Yes Yes Yes No No Yes Yes Yes Yes Yes Yes Yes Yes No NF NF Yes NF Yes NF Yes No i'' - IIA - - IIB IIB - - IIB - - IIA IIB i' - T3 - - T4 T4 - - T4 - - T4

h No No No No No Dry No No No No No No No No No No No No No No No No No No No No No No No No g Open Open Open Open Open Cont Open Open Open Open Open Cont Cont Open Open Open Open Open Open Open Cont Cont Open Open Open Open Open Open Cont Cont f 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G e 3 3 3 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 2 3 3 3 2 3 d S/P S/P P P P S/P S/P P P P P P P P P P P P P P S/P P S/P S/P P P S/P S/P S/P S/P c Y Z Y Z Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Z Y Z Y Y Y Y Y Y Y

a Polyferric sulphate solution Poly(iminoethylene)-graft-N-poly(ethyleneoxy) solution (90% or less) Polyisobutenamine in aliphatic (C10-C14) solvent Polyisobutenyl anhydride adduct Poly(4+)isobutylene Polymethylene polyphenyl isocyanate Polyolefin (molecular weight 300+) Polyolefin amide alkeneamine (C17+) Polyolefin amide alkeneamine borate (C28-C250) Polyolefin amide alkeneamine polyol Polyolefinamine (C28-C250) Polyolefinamine in alkyl (C2-C4) benzenes Polyolefinamine in aromatic solvent Polyolefin aminoester salts (molecular weight 2000+) Polyolefin anhydride Polyolefin ester (C28-C250) Polyolefin phenolic amine (C28-C250) Polyolefin phosphorosulphide, barium derivative (C28-C250) Poly(20)oxyethylene sorbitan monooleate Poly(5+)propylene Polypropylene glycol Polysiloxane Potassium chloride solution Potassium hydroxide solution Potassium oleate Potassium thiosulphate (50% or less) n-Propanolamine 2-Propene-1-aminium, N,N-dimethyl-N-2-propenyl-, chloride, homopolymer solution beta-Propiolactone Propionaldehyde 101

Bilaga

o 15.11.2, 15.11.3, 15.11.4, 15.11.6, 15.11.7, 15.11.8, 15.19.6 15.19.6 15.12, 15.17, 15.18, 15.19 15.19.6 15.19.6 15.12, 15.19 15.19.6 15.8, 15.12.1, 15.14, 15.19 15.19.6 15.19.6 15.19.6 15.12, 15.17, 15.19.6 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6 15.12,15.17, 15.19.6 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6 15.9, 15.19.6, 16.2.9 n Yes No Yes No No Yes No No No No No No No No No No No No No No No No No No No No No No No No l A A AD AB A AD A A AB AB AC A A A AB ABC ABC A ABC ABC A ABC ABC No AB A No No A No k F T FT F F FT F F F No FT F F F FT No No No FT No No No No No No No No No No No j R R C R R C R R R O C R R R C O O O C O O O O O O O O R O O i''' No Yes No No No No No No No Yes No No No No No Yes Yes Yes No Yes Yes Yes Yes NF Yes Yes NF NF Yes NF i'' IIA IIA IIB IIA IIA IIA IIA IIA IIA IIB IIA IIA IIA IIA - - - IIA - - - i' T1 T2 T1 T1 T2 T2 T2 T2 T3 T2 T3 T3 T1 T3 - - - T1 - - - -

h No No No No No Inert No No No No Inert No No No No No No No No No No No No No No No No No No No g Cont Cont Cont Cont Cont Cont Cont Cont Cont Open Cont Cont Cont Cont Cont Open Open Open Cont Open Open Open Open Open Open Open Open Open Open Open f 2G 2G 1G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G e 3 3 2 3 3 2 3 3 3 3 2 2 2 3 2 2(k) 2(k) 2 2 2(k) 2 2(k) 2(k) 2 3 3 3 3 3 3 d S/P S/P S/P P P S/P P P P P S/P P P S/P S/P S/P S/P P S/P S/P P S/P S/P P P P S/P S/P P S/P c Y Y Y Y Y Z Y Z Z Z Y X Y Y Y Y Y Y Y Y Y Y Y Y Z Z Y Y Z Z

102

a Propionic acid Propionic anhydride Propionitrile n-Propyl acetate n-Propyl alcohol n-Propylamine Propylbenzene (all isomers) Propylene glycol methyl ether acetate Propylene glycol monoalkyl ether Propylene glycol phenyl ether Propylene oxide Propylene tetramer Propylene trimer Pyridine Pyrolysis gasoline (containing benzene) Rapeseed oil Rapeseed oil (low erucic acid containing less than 4% free fatty acids) Rape seed oil fatty acid methyl esters Resin oil, distilled Rice bran oil Rosin Safflower oil Shea butter Sodium alkyl (C14-C17) sulphonates (60-65% solution) Sodium aluminosilicate slurry Sodium benzoate Sodium borohydride (15% or less)/Sodium hydroxide solution Sodium bromide solution (less than 50%) (*) Sodium carbonate solution Sodium chlorate solution (50% or less)

Bilaga

o 15.12.3, 15.19 15.19.6, 16.2.9 16.2.9 15.12, 15.14, 15.17, 15.19, 16.6.1, 16.6.2, 16.6. 15.19.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6 15.12, 15.17, 15.19, 16.2.6(only if >28%), 16.2.9 15.12.3.1, 15.12.3.2, 15.19, 16.2.9 15.19.6, 16.2.6 16.2.9 15.19.6, 16.2.9 15.19.6, 16.2.9 15.19.6, 16.2.9 15.19.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.13, 15.19.6, 16.6.1, 16.6.2 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.9 15.10, 16.2.9 15.11, 15.16.2, 15.19.6 15.11, 15.16.2, 15.19.6 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6 15.19.6, 16.2.6 15.19.6 15.19.6,16.2.6 n No No No Yes No No No Yes No No No No No No No No No No No No No No No No No No No No No l No No No A No No No AC No A A No No No No ABC AB A A No No No AB A ABC ABC ABC ABC ABC k No No No FT T No No FT No No No No T No No No F No No FT No No No No No No No No No j C O O C R O R C O O O O C O O O R O O O O O O O O O O O O i''' NF NF NF No NF NF NF No NF Yes Yes NF NF NF Yes Yes No Yes Yes Yes NF NF Yes Yes Yes Yes Yes Yes Yes i'' IIB - IIA - - IIA - - - - - - i' T4 - T1 - - T1 - T3 - - - - - -

h No No No No Vent or pad (gas) No No No No No No No No No No No No No No Vent or pad (gas) No No No No No No No No No g Open Open Open Cont Cont Open Cont Cont Open Open Open Open Cont Open Open Open Cont Open Open Open Open Open Open Open Open Open Open Open Open f 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 1G 2G 2G 2G 2G 2G 2G 2G 2G 2G e 2 3 3 2 3 3 2 2 2 2 3 3 3 3 3 2(k) 3 2 3 3 3 3 3 3 2(k) 2 2 2 2 d S/P P S/P S/P S/P S/P S/P S/P S/P S/P P P S/P P P S/P S/P P P S S/P S/P P P S/P S/P P S/P S/P c Y Z Z Y Z Y Y Y Y Y Z Y Y Y Y Y Y Y Y Z Y Y Z Z Y Y Y Y Y

103

a Sodium dichromate solution (70% or less) Sodium hydrogen sulphide (6% or less)/Sodium carbonate (3% or less) solution Sodium hydrogen sulphite solution (45% or less) Sodium hydrosulphide/Ammonium sulphide solution Sodium hydrosulphide solution (45% or less) Sodium hydroxide solution Sodium hypochlorite solution (15% or less) Sodium methylate 21-30% in methanol Sodium nitrite solution Sodium petroleum sulphonate Sodium poly(4+)acrylate solutions Sodium silicate solution Sodium sulphide solution (15% or less) Sodium sulphite solution (25% or less) Sodium thiocyanate solution (56% or less) Soyabean oil Styrene monomer Sulphohydrocarbon (C3-C88) Sulpholane Sulphur (molten) Sulphuric acid Sulphuric acid, spent Sulphurized fat (C14-C20) Sulphurized polyolefinamide alkene (C28-C250) amine Sunflower seed oil Tall oil, crude Tall oil, distilled Tall oil fatty acid (resin acids less than 20%) Tall oil pitch

Bilaga

o 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.12, 15.17, 15.19.6 15.19.6 15.19.6 15.19.6 15.19.6, 16.2.9 15.19.6 15.12, 15.17, 15.19, 16.2.6, 16.2.9 15.12, 15.16.2, 15.17, 15.19, 16.2.9 15.12, 15.17, 15.19 15.19.6 15.12.1, 15.17, 15.19, 16.2.6, 16.2.9 15.19, 16.2.9 15.19.6 15.12.1, 15.19.6 15.12, 15.17, 15.19.6 15.12, 15.17, 15.19 15.19.6 15.12.3, 15.19, 16.2.6 15.19.6, 16.2.6 15.19.6 15.19.6, 16.2.6, 16.2.9 15.19.6 16.2.9 15.12, 15.19.6 15.19.6 15.19.6 n No No No No No No No No No No Yes Yes No No Yes No No No No No No No No No No No No Yes No No l ABC A No A A A A A AB A AD AC (b)D A A ACD AB A No No ABD No AB A AB A A A AC A A k No No T No No FT No No No F T FT T No T T No T T T No No No No No No No FT No No j O O R O O R O O O R C C C O C R O R R C O C O O O O O R O O i''' Yes Yes NF Yes Yes No Yes Yes Yes No Yes Yes Yes Yes Yes Yes Yes NF Yes Yes NF Yes Yes Yes Yes Yes Yes No Yes Yes i'' - - IIB IIA IIA IIA IIA - IIA IIA IIA i' - - T3 T1 T1 T2 T2 - T2 T2

h No No No No No No No No No No No Dry No No No No No No No No No No No No No No No No No No g Open Open Cont Open Open Cont Open Open Open Cont Cont Cont Cont Open Cont Cont Open Cont Cont Cont Open Cont Open Open Open Open Open Cont Open Open f 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G e 2(k) 2 2 3 2 3 2 2 3 3 2 2 2 3 1 1 3 3 2 2 2 1 2 2 2 3 3 2 2 2 d P P S/P P S/P S P P P P S/P S/P S/P P S/P S/P P S/P S/P S/P P S/P S/P P P P S/P S/P P S/P c Y Y Y Z Y Z Y X Z Y Y Y Y Y X X Y Y Y Y Y Y Y Y Y Y Z Y X Y

104 a Tallow Tallow fatty acid Tetrachloroethane Tetraethylene glycol Tetraethylene pentamine Tetrahydrofuran Tetrahydronaphthalene Tetramethylbenzene (all isomers) Titanium dioxide slurry Toluene Toluenediamine Toluene diisocyanate o-Toluidine Tributyl phosphate 1,2,3-Trichlorobenzene (molten) 1,2,4-Trichlorobenzene 1,1,1-Trichloroethane 1,1,2-Trichloroethane Trichloroethylene 1,2,3-Trichloropropane 1,1,2-Trichloro-1,2,2-Trifluoroethane Tricresyl phosphate (containing 1% or more ortho-isomer) Tricresyl phosphate (containing less than 1% ortho-isomer) Tridecane Tridecanoic acid Tridecyl acetate Triethanolamine Triethylamine Triethylbenzene Triethylenetetramine

Bilaga

o 15.12.1, 15.19.6, 16.2.9 15.19.6, 16.2.6 15.11.2, 15.11.3, 15.11.4, 15.11.5, 15.11.6, 15.11.7, 15.11.8, 15.19.6, 16.2.6, 16.2.9 15.12, 15.14, 15.19, 16.2.9 15.19.6 15.19.6 15.19.6, 16.2.9 15.19.6, 16.2.6 15.19.6, 16.2.6, 16.2.9 15.19.6 16.2.6, 16.2.9 15.19.6 15.19.6, 16.2.9 16.2.9 15.19.6 15.4.6, 15.19.6 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.13, 15.19.6, 16.6.1, 16.6.2 15.4, 15.13, 15.14, 15.19.6, 16.6.1, 16.6.2 15.13, 15.14, 15.19.6, 16.6.1, 16.6.2 15.13, 15.19.6, 16.6.1, 16.6.2 15.13, 15.19.6, 16.6.1, 16.6.2 n No No No No No Yes No No No No No No No No No No No No No No No No No No No No Yes Yes No No l A AB A A A AC A ABC AB A AD A A ABC A A A A A A A A A ABC ABC A A B AB AB k No FT No No No FT F No No No F No No No F No No No No T No No FT No No F FT FT No F j O R O O R C R O O O R O O O R O O O O R O O R O O R C R O R i''' Yes No Yes Yes Yes No No Yes Yes Yes No Yes Yes Yes No Yes Yes Yes Yes NF Yes Yes No Yes Yes No No No Yes No i'' IIA IIB IIA - IIB - IIA IIB - - IIA IIB IIA IIA i' T3 T3 T1 - T2 - T1 T3 - - T2 T3 T2 T1

h No No No No No No No No No No No No No No No No No No No No No No Inert No No No Inert Inert No No g Open Cont Open Open Cont Cont Cont Open Open Open Cont Open Open Open Cont Open Open Open Open Cont Open Open Cont Open Open Cont Cont Cont Open Cont f 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 2G 1G 2G 2G 2G e 3 3 3 2 2 2 2 3 3 2 3 3 2 2(k) 2 2 2 2 3 3 2 3 3 2 2 3 2 2 2 2 d P S/P P P S/P S/P P S/P P P S/P P P S/P P P P P P S/P P P S/P S/P S/P S/P S/P S/P S/P S/P c Z Z Z X Y Z X Z Z Y Y Z X Y X Y X X Z Z Y Z Y Y Y Y Z Y Y Y

a Triethyl phosphate Triethyl phosphite Triisopropanolamine Triisopropylated phenyl phosphates Trimethylacetic acid Trimethylamine solution (30% or less) Trimethylbenzene (all isomers) Trimethylol propane propoxylated 2,2,4-Trimethyl-1,3-pentanediol diisobutyrate 2,2,4-Trimethyl-1,3-pentanediol-1-isobutyrate 1,3,5-Trioxane Tripropylene glycol Trixylyl phosphate Tung oil Turpentine Undecanoic acid 1-Undecene Undecyl alcohol Urea/Ammonium nitrate solution Urea/Ammonium nitrate solution (containing less than 1% free ammonia) Urea/Ammonium phosphate solution Urea solution Valeraldehyde (all isomers) Vegetable acid oils (m) Vegetable fatty acid distillates (m) Vinyl acetate Vinyl ethyl ether Vinylidene chloride Vinyl neodecanoate Vinyltoluene 105

Bilaga

o 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.9 15.19.6, 16.2.9 (h) 15.19.6 15.19.6, 16.2.9 15.19.6, 16.2.6, 16.2.9 15.19.6, 16.2.6 15.19.6, 16.2.6 n No No No No No No No No No l AB A No A A AB AB AB AB k No F No F F No No No No j O R O R R O O O O i''' Yes No NF No No Yes Yes Yes Yes i'' - IIA - IIA IIA IIA i' - T3 - T1 T2 h No No No No No No No No No g Open Cont Open Cont Cont Open Open Open Open f 2G 2G 2G 2G 2G 2G 2G 2G 2G e 2 2 3 2 2 2 2 2 2 d P P S/P P P S/P P P P c Y Y Z Y Y Y Y Y Y

a Waxes White spirit, low (15-20%) aromatic Wood lignin with sodium acetate/oxalate Xylenes Xylenes/ethylbenzene (10% or more) mixture Xylenol Zinc alkaryl dithiophosphate (C7-C16) Zinc alkenyl carboxamide Zinc alkyl dithiophosphate (C3-C14)

106

Bilaga

Chapter 17

a If the product to be carried contains flammable solvents such that the flashpoint does not exceed 60°C, then special electrical systems and a flammable-vapour detector shall be provided. b Although water is suitable for extinguishing open-air fires involving chemicals to which this footnote applies, water shall not be allowed to contaminate closed tanks containing these chemicals because of the risk of hazardous gas generation. c Phosphorus, yellow or white is carried above its autoignition temperature and therefore flashpoint is not appropriate. Electrical equipment requirements may be similar to those for substances with a flashpoint above 60°C. d Requirements are based on those isomers having a flashpoint of 60°C, or less; some isomers have a flashpoint greater than 60°C, and therefore the requirements based on flammability would not apply to such isomers. e Applies to n-decyl alcohol only. f Dry chemical shall not be used as fire extinguishing media. g Confined spaces shall be tested for both formic acid vapours and carbon monoxide gas, a decomposition product. h Applies to p-xylene only. i For mixtures containing no other components with safety hazards and where the pollution category is Y or less. j Only certain alcohol-resistant foams are effective. k Requirements for Ship Type identified in column e might be subject to regulation 4.1.3 of Annex II of MARPOL 73/78. l Applicable when the melting point is equal to or greater than 0°C. m From vegetable oils, animal fats and fish oils specified in the IBC Code.

* Indicates that with reference to chapter 21 of the IBC Code (paragraph 21.1.3), deviations from the normal assignment criteria used for some carriage requirements have been implemented. ***

107

Bilaga

Chapter 18 List of products to which the Code does not apply

18.1 The following are products, which have been reviewed for their safety and pollution hazards and determined not to present hazards to such an extent as to warrant application of the Code.

18.2 Although the products listed in this chapter fall outside the scope of the Code, the attention of Administrations is drawn to the fact that some safety precautions may be needed for their safe transportation. Accordingly, Administrations shall prescribe appropriate safety requirements.

18.3 Some liquid substances are identified as falling into Pollution Category Z and, therefore, subject to certain requirements of Annex II of MARPOL.

18.4 Liquid mixtures which are assessed or provisionally assessed under regulation 6.3 of MARPOL Annex II as falling into Pollution Category Z or OS, and which do not present safety hazards, may be carried under the appropriate entry in this chapter for "Noxious or Non-Noxious Liquid Substances, not otherwise specified (n.o.s.)".

EXPLANATORY NOTES

Product name The product name shall be used in the shipping document for any cargo offered for bulk shipments. Any additional name may be included in brackets after the product name. In some cases, the product names are not identical with the names given in previous issues of the Code.

Pollution Category The letter Z means the Pollution Category assigned to each product under Annex II of MARPOL. OS means the product was evaluated and found to fall outside Categories X, Y, or Z.

108

Bilaga

Product Name Pollution Category

Acetone Z Alcoholic beverages, n.o.s. Z Apple juice OS n-Butyl alcohol Z sec-Butyl alcohol Z Calcium carbonate slurry OS Calcium nitrate solutions (50% or less) Z Clay slurry OS Coal slurry OS Diethylene glycol Z Ethyl alcohol Z Ethylene carbonate Z Glucose solution OS Glycerine Z Glycerol ethoxylated OS Hexamethylenetetramine solutions Z Hexylene glycol Z Hydrogenated starch hydrolysate OS Isopropyl alcohol Z Kaolin slurry OS Lecithin OS Magnesium hydroxide slurry Z Maltitol solution OS N-Methylglucamine solution (70% or less) Z Methyl propyl ketone Z Microsilica slurry OS Molasses OS

Orange juice (concentrated) OS Orange juice (not concentrated) OS Polyaluminium chloride solution Z Polyglycerin, sodium salt solution (containing less than 3% sodium hydroxide) Z Potassium chloride solution (less than 26%) OS Potassium formate solutions Z Propylene carbonate Z Propylene glycol Z Sodium acetate solutions Z Sodium bicarbonate solution (less than 10%) OS Sodium sulphate solutions Z Sorbitol solution OS Sulphonated polyacrylate solution Z Tetraethyl silicate monomer/oligomer (20% in ethanol) Z Triethylene glycol Z Vegetable protein solution (hydrolysed) OS

109

Bilaga

Product Name Pollution Category

Water OS

110

Bilaga

Chapter 19 Index of Products Carried in Bulk

19.1 The first column of the Index of Products Carried in Bulk (hereafter referred to as "the Index") provides the so-called Index Name. Where the Index Name is in capitals and in bold, the Index Name is identical to the Product Name in either chapter 17 or chapter 18. The second column listing the relevant Product Name is therefore empty. Where the Index Name is non-bold lower case it reflects a synonym for which the Product Name in either chapter 17 or chapter 18 is given in the second column. The relevant chapter of the IBC Code is reflected in the third column.

19.2 Following a review of chapter 19, a column listing UN numbers which was previously included has been removed from the Index. Since UN numbers are only available for a limited number of Index Names and there are inconsistencies between some of the names used in chapter 19 and those linked to UN numbers, it was decided to remove UN number references in order to avoid any confusion.

19.3 The Index has been developed for information purposes only. None of the Index Names indicated in non-bold lower case in the first column shall be used as the Product Name on the shipping document.

19.4 Prefixes forming an integral part of the name are shown in ordinary (roman) type and are taken into account in determining the alphabetical order of entries. These include such prefixes as:

Mono Di Tri Tetra Penta Iso Bis Neo Ortho Cyclo

19.5 Prefixes that are disregarded for purposes of alphabetical order are in italics and include the following:

n- (normal-) sec- (secondary-) tert- (tertiary-) o- (ortho-) m- (meta-) p- (para-) N- O- Ssym- (symmetrical) uns- (unsymmetrical) dl- D- Lcistrans- (E)- (Z)alpha- (α-) beta- (β-) gamma- (γ-) epsilon (ε-) omega (ω-)

111

Bilaga

19.6 The Index utilizes a note after the index name for some entries (shown as (a) or (b)) which indicates that the following qualifications apply:

(a) this Index Name represents a subset of the corresponding Product Name.

(b) The Product Name corresponding to this Index Name contains a carbon chain length qualification. Since the Index Name should always represent a subset or be an exact synonym of the corresponding Product Name, the carbon chain length characteristics should be checked for any product identified by this Index Name.

112

ALKYL BENZENE DISTILLATION BOTTOMS 17 ALKYLBENZENE MIXTURES (CONTAINING AT 17

LEAST 50% OF TOLUENE)

ALKYL (C3-C4) BENZENES 17 ALKYL (C5-C8) BENZENES 17 ALKYL(C9+)BENZENES 17 ALKYL (C11-C17) BENZENE SULPHONIC ACID 17 ALKYLBENZENE SULPHONIC ACID, SODIUM 17

SALT SOLUTION

ALKYL (C12+) DIMETHYLAMINE 17 ALKYL DITHIOCARBAMATE (C19-C35) 17 ALKYLDITHIOTHIADIAZOLE (C6-C24) 17 ALKYL ESTER COPOLYMER (C4-C20) 17

114

Bilaga

Index Name Product Name Chapter

ALKYL (C8-C10)/(C12-C14):(40% OR LESS/60% 17

OR MORE) POLYGLUCOSIDE SOLUTION (55% OR LESS)

ALKYL (C8-C10)/(C12-C14):(60% OR MORE/40% 17

OR LESS) POLYGLUCOSIDE SOLUTION(55% OR LESS)

ALKYL (C7-C9) NITRATES 17 2,2'- [3-(Alkyl(C16-C18)oxy)propylimino]diethanol (a) ETHOXYLATED LONG CHAIN (C16+) 17

ALKYLOXYALKYLAMINE

ALKYL(C7-C11)PHENOL POLY(4-12) 17

ETHOXYLATE

ALKYL (C8-C40) PHENOL SULPHIDE 17 ALKYL (C8-C9) PHENYLAMINE IN AROMATIC 17

SOLVENTS

ALKYL (C9-C15) PHENYL PROPOXYLATE 17 ALKYL (C8-C10) POLYGLUCOSIDE SOLUTION 17

(65% OR LESS)

ALKYL (C8-C10)/(C12-C14):(50%/50%) 17

POLYGLUCOSIDE SOLUTION (55% OR LESS)

ALKYL (C12-C14) POLYGLUCOSIDE SOLUTION 17

(55% OR LESS)

ALKYL(C12-C16) PROPOXYAMINE 17

ETHOXYLATE

ALKYL(C10-C20, SATURATED AND 17

UNSATURATED) PHOSPHITE

ALKYL SULPHONIC ACID ESTER OF PHENOL 17 ALKYL (C18+) TOLUENES 17 ALKYL(C18-C28)TOLUENESULFONIC ACID 17 ALKYL(C18-C28)TOLUENESULFONIC ACID, 17

CALCIUM SALTS, BORATED

Alkyltoluenesulfonic acid, calcium salts, high overbase ALKYL (C18-C28) TOLUENESULPHONIC ACID, 17 (up to 70% in mineral oil) CALCIUM SALTS, HIGH OVERBASE ALKYL (C18-C28) TOLUENESULFONIC ACID, 17

CALCIUM SALTS, LOW OVERBASE

Alkyl(C18-C28)toluenesulfonic acid,calcium salts, low ALKYL (C18-C28) TOLUENESULFONIC ACID, CALCIUM 17 overbase (up to 60% in mineral oil) SALTS, LOW OVERBASE ALKYL (C18-C28) TOLUENESULPHONIC ACID, 17

CALCIUM SALTS, HIGH OVERBASE

3-Alky(C16-C18)oxy-N,N'-bis(2-hydroxyethyl)propan-1- ETHOXYLATED LONG CHAIN (C16+) 17 amine (a) ALKYLOXYALKYLAMINE ALLYL ALCOHOL 17 ALLYL CHLORIDE 17 ALUMINIUM CHLORIDE/HYDROGEN 17

CHLORIDE SOLUTION

Aluminium silicate hydroxide KAOLIN SLURRY 18 ALUMINIUM SULPHATE SOLUTION 17 Aminoacetic acid, sodium salt solution GLYCINE, SODIUM SALT SOLUTION 17 1-Amino-3-aminomethyl-3,5,5-trimethylcyclohexane ISOPHORONEDIAMINE 17 Aminobenzene ANILINE 17 1-Aminobutane (a) BUTYLAMINE (ALL ISOMERS) 17 2-Aminobutane BUTYLAMINE (ALL ISOMERS) 17 Aminocyclohexane CYCLOHEXYLAMINE 17 Aminoethane ETHYLAMINE 17 Aminoethane solutions, 72% or less ETHYLAMINE SOLUTIONS (72% OR LESS) 17

115

Bilaga

Index Name Product Name Chapter

2-Aminoethanol ETHANOLAMINE 17 2-(2-AMINOETHOXY) ETHANOL 17 2-(2-Aminoethylamino)ethanol AMINOETHYL ETHANOLAMINE 17 AMINOETHYLDIETHANOLAMINE/AMINOETHY 17

LETHANOLAMINE SOLUTION

AMINOETHYL ETHANOLAMINE 17 N-(2-aminoethyl)ethylenediamine DIETHYLENETRIAMINE 17 1-(2-Aminoethyl)piperazine N-AMINOETHYLPIPERAZINE 17 N-AMINOETHYLPIPERAZINE 17 2-Aminoisobutane (a) BUTYLAMINE (ALL ISOMERS) 17 Aminomethane solutions, 42% or less METHYLAMINE SOLUTIONS (42% OR LESS) 17 1-Amino-2-methylbenzene O-TOLUIDINE 17 2-Amino-1-methylbenzene O-TOLUIDINE 17 2-AMINO-2-METHYL-1-PROPANOL 17 3-Aminomethyl-3,5,5-trimethylcyclohexylamine ISOPHORONEDIAMINE 17 Aminophen ANILINE 17 1-Aminopropane N-PROPYLAMINE 17 2-Aminopropane ISOPROPYLAMINE 17 2-Aminopropane (70% or less) solution ISOPROPYLAMINE (70% OR LESS) SOLUTION 17 1-Amino-2-propanol ISOPROPANOLAMINE 17 1-Aminopropan-2-ol ISOPROPANOLAMINE 17 3-Aminopropan-1-ol N-PROPANOLAMINE 17 2-Aminotoluene O-TOLUIDINE 17 o-Aminotoluene O-TOLUIDINE 17 5-Amino-1,3,3-trimethylcyclohexylmethylamine ISOPHORONEDIAMINE 17 AMMONIA AQUEOUS (28% OR LESS) 17 Ammonia water, 28% or less AMMONIA AQUEOUS (28% OR LESS) 17 AMMONIUM CHLORIDE SOLUTION (LESS 17

THAN 25%) (*)

AMMONIUM HYDROGEN PHOSPHATE 17

SOLUTION

Ammonium hydroxide, 28% or less AMMONIA AQUEOUS (28% OR LESS) 17 AMMONIUM LIGNOSULPHONATE SOLUTIONS 17 AMMONIUM NITRATE SOLUTION (93% OR 17

LESS)

AMMONIUM POLYPHOSPHATE SOLUTION 17 AMMONIUM SULPHATE SOLUTION 17 AMMONIUM SULPHIDE SOLUTION (45% OR 17

LESS)

AMMONIUM THIOSULPHATE SOLUTION (60% 17

OR LESS)

AMYL ACETATE (ALL ISOMERS) 17 Amyl acetate, commercial (a) AMYL ACETATE (ALL ISOMERS) 17 n-Amyl acetate (a) AMYL ACETATE (ALL ISOMERS) 17 sec-Amyl acetate (a) AMYL ACETATE (ALL ISOMERS) 17 Amylacetic ester (a) AMYL ACETATE (ALL ISOMERS) 17 Amyl alcohol N-AMYL ALCOHOL 17 N-AMYL ALCOHOL 17 AMYL ALCOHOL, PRIMARY 17

116

Bilaga

Index Name Product Name Chapter

SEC-AMYL ALCOHOL 17 TERT-AMYL ALCOHOL 17 Amyl aldehyde VALERALDEHYDE (ALL ISOMERS) 17 Amylcarbinol HEXANOL 17 Amylene hydrate TERT-AMYL ALCOHOL 17 Amyl ethyl ketone ETHYL AMYL KETONE 17 TERT-AMYL METHYL ETHER 17 n-Amyl methyl ketone METHYL AMYL KETONE 17 n-Amyl propionate N-PENTYL PROPIONATE 17 Anaesthetic ether DIETHYL ETHER 17 ANILINE 17 Aniline oil ANILINE 17 Anilinobenzene DIPHENYLAMINE (MOLTEN) 17 Anthracene oil (coal tar fraction) (a) COAL TAR 17 Ant oil, artificial FURFURAL 17 APPLE JUICE 18 Aqua fortis NITRIC ACID (70% AND OVER) 17 Argilla KAOLIN SLURRY 18 ARYL POLYOLEFINS (C11-C50) 17 AVIATION ALKYLATES (C8 PARAFFINS AND 17

ISO-PARAFFINS BPT 95 - 120°C)

Azacycloheptane HEXAMETHYLENEIMINE 17 3-Azapentane-1,5-diamine DIETHYLENETRIAMINE 17 Azepane HEXAMETHYLENEIMINE 17 Azotic acid NITRIC ACID (70% AND OVER) 17 BARIUM LONG CHAIN (C11-C50) ALKARYL 17

SULPHONATE

Basic calcium alkyl salicylate in approximately 30% CALCIUM LONG-CHAIN ALKYL SALICYLATE (C13+) 17 mineral oil (b) Battery acid SULPHURIC ACID 17 Behenyl alcohol (a) ALCOHOLS (C13+) 17 Benzenamine ANILINE 17 1,4-Benzenedicarboxylic acid, butyl ester DIBUTYL TEREPHTHALATE 17 1,2-Benzenedicarboxylic acid, diethyl ester DIETHYL PHTHALATE 17 1,2-Benzenedicarboxylic acid, diundecyl ester DIUNDECYL PHTHALATE 17 BENZENE AND MIXTURES HAVING 10% 17

BENZENE OR MORE (I)

BENZENESULPHONYL CHLORIDE BENZENE SULPHONYL CHLORIDE 17 BENZENE SULPHONYL CHLORIDE 17 BENZENETRICARBOXYLIC ACID, TRIOCTYL 17

ESTER

Benzenol PHENOL 17 Benzol BENZENE AND MIXTURES HAVING 10% BENZENE OR 17

MORE (I)

Benzole BENZENE AND MIXTURES HAVING 10% BENZENE OR 17

MORE (I)

Benzophenol PHENOL 17 2-Benzothiazolethiol, sodium salt solution MERCAPTOBENZOTHIAZOL, SODIUM SALT 17

SOLUTION

117

121

DIMETHYLAMINE SOLUTION (GREATER THAN 17

55% BUT NOT GREATER THAN 65%)

Dimethylaminoethanol DIMETHYLETHANOLAMINE 17 2-(Dimethylamino)ethanol DIMETHYLETHANOLAMINE 17 Dimethylbenzenes XYLENES 17 1,3-Dimethylbutanol METHYLAMYL ALCOHOL 17 1,3-Dimethylbutan-1-ol METHYLAMYL ALCOHOL 17 1,3-Dimethylbutyl acetate (a) METHYLAMYL ACETATE 17 Dimethylcarbinol ISOPROPYL ALCOHOL 18

128

Dodecyl diphenyl oxide disulphonate solution DODECYL DIPHENYL ETHER DISULPHONATE 17

SOLUTION

Dodecylene DODECENE (ALL ISOMERS) 17 DODECYL HYDROXYPROPYL SULPHIDE 17 Dodecylic acid LAURIC ACID 17 tert-Dodecyl mercaptan TERT-DODECANETHIOL 17 DODECYL METHACRYLATE 17 Dodecyl 2-methylprop-2-enoate DODECYL METHACRYLATE 17 Dodecyl-2-methyl-2-propenoate DODECYL METHACRYLATE 17 DODECYL/OCTADECYL METHACRYLATE 17

MIXTURE

DODECYL/PENTADECYL METHACRYLATE 17

MIXTURE

DODECYL PHENOL 17 Dodecyl, Tetradecyl, hexadecyl-dimethylamine mixture ALKYL (C12+) DIMETHYLAMINE 17 2-Dodecylthio-1-methylethanol DODECYL HYDROXYPROPYL SULPHIDE 17 1-(Dodecylthio)propan-2-ol DODECYL HYDROXYPROPYL SULPHIDE 17 DODECYL XYLENE 17 Drilling brine: potassium chloride solution POTASSIUM CHLORIDE SOLUTION 17 DRILLING BRINES (CONTAINING ZINC SALTS) 17 DRILLING BRINES, INCLUDING:CALCIUM 17

BROMIDE SOLUTION, CALCIUM CHLORIDE SOLUTION AND SODIUM CHLORIDE SOLUTION

(E)-But-2-enal CROTONALDEHYDE 17 Enanthic acid N-HEPTANOIC ACID 17 Enanthylic acid N-HEPTANOIC ACID 17

131

Bilaga

Index Name Product Name Chapter

Engravers' acid NITRIC ACID (70% AND OVER) 17 EPICHLOROHYDRIN 17 1,2-Epoxybutane 1,2-BUTYLENE OXIDE 17 1,4-epoxybutane TETRAHYDROFURAN 17 1,2-Epoxypropane PROPYLENE OXIDE 17 2,3-Epoxypropyl ester of mixed C10 trialkylacetic acids GLYCIDYL ESTER OF C10 TRIALKYLACETIC ACID 17 2,3-Epoxypropyl neodecanoate GLYCIDYL ESTER OF C10 TRIALKYLACETIC ACID 17 EPTC S-ETHYL DIPROPYLTHIOCARBAMATE 17 Essence of Mirbane NITROBENZENE 17 Essence of Myrbane NITROBENZENE 17 Ethanamine solutions, 72% or less ETHYLAMINE SOLUTIONS (72% OR LESS) 17 Ethanecarbonitrile PROPIONITRILE 17 Ethanedial GLYOXAL SOLUTION (40% OR LESS) 17 1,2-Ethanediol ETHYLENE GLYCOL 17 Ethanoic acid ACETIC ACID 17 Ethanoic anhydride ACETIC ANHYDRIDE 17 Ethanol ETHYL ALCOHOL 18 ETHANOLAMINE 17 ethenyl acetate VINYL ACETATE 17 ethenyl ethanoate VINYL ACETATE 17 Ether DIETHYL ETHER 17 Ethinyl trichloride TRICHLOROETHYLENE 17 2-Ethoxyethanol (a) ETHYLENE GLYCOL MONOALKYL ETHERS 17 2-(2-Ethoxyethoxy)ethanol (a) POLY(2-8)ALKYLENE GLYCOL MONOALKYL(C1-C6) 17

ETHER

2-(2-Ethoxyethoxy)ethyl acetate (a) POLY(2-8)ALKYLENE GLYCOL MONOALKYL (C1-C6) 17

ETHER ACETATE

2-ETHOXYETHYL ACETATE 17 ETHOXYLATED LONG CHAIN (C16+) 17

ALKYLOXYALKYLAMINE

ETHOXYLATED TALLOW AMINE (> 95%) 17 2-Ethoxy-2-methylpropane ETHYL TERT-BUTYL ETHER 17 1-Ethoxypropan-2-ol (a) PROPYLENE GLYCOL MONOALKYL ETHER 17 ETHYL ACETATE 17 ETHYL ACETOACETATE 17 Ethyl acetone METHYL PROPYL KETONE 18 ETHYL ACRYLATE 17 ETHYL ALCOHOL 18 ETHYLAMINE 17 ETHYLAMINE SOLUTIONS (72% OR LESS) 17 Ethylaminocyclohexane N-ETHYLCYCLOHEXYLAMINE 17 ETHYL AMYL KETONE 17 ETHYLBENZENE 17 Ethyl benzol ETHYLBENZENE 17 Ethyl butanoate ETHYL BUTYRATE 17 ETHYL TERT-BUTYL ETHER 17 ETHYL BUTYRATE 17 2-Ethylcaproic acid 2-ETHYLHEXANOIC ACID 17

132

Bilaga

Index Name Product Name Chapter

Ethyl carbinol N-PROPYL ALCOHOL 17 Ethyl cyanide PROPIONITRILE 17 ETHYLCYCLOHEXANE 17 N-ETHYLCYCLOHEXYLAMINE 17 Ethyldimethylmethane (a) PENTANE (ALL ISOMERS) 17 S-Ethyl dipropylcarbamothioate S-ETHYL DIPROPYLTHIOCARBAMATE 17 S-ETHYL DIPROPYLTHIOCARBAMATE 17 Ethylene alcohol ETHYLENE GLYCOL 17 Ethylene bis(iminodiacetic acid) tetrasodium salt solution ETHYLENEDIAMINETETRAACETIC ACID, 17

TETRASODIUM SALT SOLUTION

Ethylene bromide ETHYLENE DIBROMIDE 17 ETHYLENE CARBONATE 18 Ethylenecarboxylic acid ACRYLIC ACID 17 Ethylene chloride ETHYLENE DICHLORIDE 17 ETHYLENE CHLOROHYDRIN 17 ETHYLENE CYANOHYDRIN 17 Ethylene diacetate ETHYLENE GLYCOL DIACETATE 17 ETHYLENEDIAMINE 17 ETHYLENEDIAMINETETRAACETIC ACID, 17

TETRASODIUM SALT SOLUTION

ETHYLENE DIBROMIDE 17 ETHYLENE DICHLORIDE 17 Ethylenedinitrilotetraacetic acid tetrasodium salt solution ETHYLENEDIAMINETETRAACETIC ACID, 17

TETRASODIUM SALT SOLUTION

2,2'-Ethylenedioxydiethanol TRIETHYLENE GLYCOL 18 ETHYLENE GLYCOL 17 ETHYLENE GLYCOL ACETATE 17 Ethylene glycol acrylate 2-HYDROXYETHYL ACRYLATE 17 Ethylene glycol butyl ether (a) ETHYLENE GLYCOL MONOALKYL ETHERS 17 ETHYLENE GLYCOL BUTYL ETHER ACETATE 17 Ethylene glycol tert-butyl ether (a) ETHYLENE GLYCOL MONOALKYL ETHERS 17 ETHYLENE GLYCOL DIACETATE 17 Ethylene glycol ethyl ether (a) ETHYLENE GLYCOL MONOALKYL ETHERS 17 Ethylene glycol ethyl ether acetate 2-ETHOXYETHYL ACETATE 17 Ethylene glycol isopropyl ether (a) ETHYLENE GLYCOL MONOALKYL ETHERS 17 Ethylene glycol methyl ether (a) ETHYLENE GLYCOL MONOALKYL ETHERS 17 ETHYLENE GLYCOL METHYL ETHER 17

ACETATE

ETHYLENE GLYCOL MONOALKYL ETHERS 17 Ethylene glycol monobutyl ether (a) ETHYLENE GLYCOL MONOALKYL ETHERS 17 Ethylene glycol mono-tert-butyl ether (a) ETHYLENE GLYCOL MONOALKYL ETHERS 17 Ethylene glycol monoethyl ether (a) ETHYLENE GLYCOL MONOALKYL ETHERS 17 Ethylene glycol monoethyl ether acetate 2-ETHOXYETHYL ACETATE 17 Ethylene glycol monomethyl ether (a) ETHYLENE GLYCOL MONOALKYL ETHERS 17 Ethylene glycol monomethyl ether acetate ETHYLENE GLYCOL METHYL ETHER ACETATE 17 Ethylene glycol monophenyl ether ETHYLENE GLYCOL PHENYL ETHER 17 ETHYLENE GLYCOL PHENYL ETHER 17

133

HYDROGEN PEROXIDE SOLUTIONS (OVER 8% 17

BUT NOT OVER 60% BY MASS)

Hydrogen sulphate SULPHURIC ACID 17 alpha-Hydro-omega-hydroxypoly[oxy(methyl-1,2- POLYPROPYLENE GLYCOL 17 ethanediyl)] Hydroxyacetic acid GLYCOLIC ACID SOLUTION (70% OR LESS) 17 Hydroxybenzene PHENOL 17 4-Hydroxybutanoic acid lactone GAMMA-BUTYROLACTONE 17 4-Hydroxybutyric acid lactone GAMMA-BUTYROLACTONE 17 gamma-Hydroxybutyric acid lactone GAMMA-BUTYROLACTONE 17 Hydroxydimethylbenzenes XYLENOL 17 Hydroxyethanoic acid GLYCOLIC ACID SOLUTION (70% OR LESS) 17 2-Hydroxyethyl acetate ETHYLENE GLYCOL ACETATE 17 2-HYDROXYETHYL ACRYLATE 17 beta-Hydroxyethyl acrylate 2-HYDROXYETHYL ACRYLATE 17 2-Hydroxyethylamine ETHANOLAMINE 17 N-beta-Hydroxyethylethylenediamine AMINOETHYL ETHANOLAMINE 17 N-(HYDROXYETHYL) 17

ETHYLENEDIAMINETRIACETIC ACID, TRISODIUM SALT SOLUTION

138

Bilaga

Index Name Product Name Chapter

beta-Hydroxyethyl phenyl ether ETHYLENE GLYCOL PHENYL ETHER 17 2-Hydroxyethyl propenoate 2-HYDROXYETHYL ACRYLATE 17 2-Hydroxyethyl 2-propenoate 2-HYDROXYETHYL ACRYLATE 17 alpha-Hydroxyisobutyronitrile ACETONE CYANOHYDRIN 17 4-Hydroxy-2-keto-4-methylpentane DIACETONE ALCOHOL 17 4-Hydroxy-4-methylpentanone-2 DIACETONE ALCOHOL 17 4-Hydroxy-4-methylpentan-2-one DIACETONE ALCOHOL 17 2-Hydroxy-2-methylpropiononitrile ACETONE CYANOHYDRIN 17 2-HYDROXY-4-(METHYLTHIO)BUTANOIC ACID 17 2-Hydroxy-4-(methylthio)butyric acid 2-HYDROXY-4-(METHYLTHIO)BUTANOIC ACID 17 2-Hydroxynitrobenzene (molten) O-NITROPHENOL (MOLTEN) 17 1-Hydroxy-2-phenoxyethane ETHYLENE GLYCOL PHENYL ETHER 17 2-Hydroxypropanoic acid LACTIC ACID 17 2-Hydroxypropionic acid LACTIC ACID 17 alpha-Hydroxypropionic acid LACTIC ACID 17 3-Hydroxypropionic acid, lactone. BETA-PROPIOLACTONE 17 beta-Hydroxypropionitrile ETHYLENE CYANOHYDRIN 17 2-Hydroxypropionitrile solution (80% or less) LACTONITRILE SOLUTION (80% OR LESS) 17 alpha-Hydroxypropionitrile solution (80% or less) LACTONITRILE SOLUTION (80% OR LESS) 17 3-Hydroxypropiononitrile ETHYLENE CYANOHYDRIN 17 2-Hydroxypropiononitrile solution (80% or less) LACTONITRILE SOLUTION (80% OR LESS) 17 2-[2-(2-hydroxypropoxy)propoxy]propan-1-ol TRIPROPYLENE GLYCOL 17 2-Hydroxypropylamine ISOPROPANOLAMINE 17 3-Hydroxypropylamine N-PROPANOLAMINE 17 alpha-Hydroxytoluene BENZYL ALCOHOL 17 3-Hydroxy-2,2,4-trimethylpentyl isobutyrate 2,2,4-TRIMETHYL-1,3-PENTANEDIOL-1-ISOBUTYRATE 17 ILLIPE OIL 17 2,2'-Iminodi(ethylamine) DIETHYLENETRIAMINE 17 2,2'-Iminodiethanol DIETHANOLAMINE 17 1,1'-Iminodipropan-2-ol DIISOPROPANOLAMINE 17 Iron (III) chloride solutions FERRIC CHLORIDE SOLUTIONS 17 Iron (III) nitrate / nitric acid solution FERRIC NITRATE/NITRIC ACID SOLUTION 17 Isoacetophenone ISOPHORONE 17 Isoamyl acetate (a) AMYL ACETATE (ALL ISOMERS) 17 ISOAMYL ALCOHOL 17 Isobutaldehyde (a) BUTYRALDEHYDE (ALL ISOMERS) 17 Isobutanal (a) BUTYRALDEHYDE (ALL ISOMERS) 17 Isobutanol ISOBUTYL ALCOHOL 17 Isobutanolamine 2-AMINO-2-METHYL-1-PROPANOL 17 Isobutyl acetate BUTYL ACETATE (ALL ISOMERS) 17 Isobutyl acrylate (a) BUTYL ACRYLATE (ALL ISOMERS) 17 ISOBUTYL ALCOHOL 17 Isobutyl aldehyde (a) BUTYRALDEHYDE (ALL ISOMERS) 17 Isobutylamine (a) BUTYLAMINE (ALL ISOMERS) 17 Isobutylcarbinol ISOAMYL ALCOHOL 17 ISOBUTYL FORMATE 17

139

Bilaga

Index Name Product Name Chapter

Isobutyl ketone DIISOBUTYL KETONE 17 ISOBUTYL METHACRYLATE 17 Isobutylmethylcarbinol METHYLAMYL ALCOHOL 17 Isobutyl methyl ketone METHYL ISOBUTYL KETONE 17 Isobutylmethylmethanol METHYLAMYL ALCOHOL 17 Isobutyraldehyde (a) BUTYRALDEHYDE (ALL ISOMERS) 17 Isobutyric aldehyde (a) BUTYRALDEHYDE (ALL ISOMERS) 17 alpha-Isocyanatobenzyl-omega-isocyanatophenylpoly POLYMETHYLENE POLYPHENYL ISOCYANATE 17 [(phenyl isocyanate)-alt-formaldehyde] 3-Isocyanatomethyl-3,5,5-trimethylcyclohexyl isocyanate ISOPHORONE DIISOCYANATE 17 Isodecanol DECYL ALCOHOL (ALL ISOMERS) 17 Isodecyl alcohol DECYL ALCOHOL (ALL ISOMERS) 17 Isododecane (a) DODECANE (ALL ISOMERS) 17 Isodurene (a) TETRAMETHYLBENZENE (ALL ISOMERS) 17 Isononanoic acid NONANOIC ACID (ALL ISOMERS) 17 Isononanol NONYL ALCOHOL (ALL ISOMERS) 17 Isooctane (a) OCTANE (ALL ISOMERS) 17 Isooctanol OCTANOL (ALL ISOMERS) 17 Isopentane (a) PENTANE (ALL ISOMERS) 17 Isopentanol ISOAMYL ALCOHOL 17 Isopentanol AMYL ALCOHOL, PRIMARY 17 Isopentyl acetate (a) AMYL ACETATE (ALL ISOMERS) 17 Isopentyl alcohol ISOAMYL ALCOHOL 17 ISOPHORONE 17 ISOPHORONEDIAMINE 17 ISOPHORONE DIISOCYANATE 17 ISOPRENE 17 Isopropanol ISOPROPYL ALCOHOL 18 ISOPROPANOLAMINE 17 Isopropenylbenzene ALPHA-METHYLSTYRENE 17 2-Isopropoxyethanol (a) ETHYLENE GLYCOL MONOALKYL ETHERS 17 2-Isopropoxypropane ISOPROPYL ETHER 17 ISOPROPYL ACETATE 17 Isopropylacetone METHYL ISOBUTYL KETONE 17 ISOPROPYL ALCOHOL 18 ISOPROPYLAMINE 17 ISOPROPYLAMINE (70% OR LESS) SOLUTION 17 Isopropylammonium N-(phosphonomethyl)glycine GLYPHOSATE SOLUTION (NOT CONTAINING 17

SURFACTANT)

Isopropylcarbinol ISOBUTYL ALCOHOL 17 Isopropyl carbinol ISOBUTYL ALCOHOL 17 ISOPROPYLCYCLOHEXANE 17 1-Isopropyl-2,2-dimethyltrimethylene diisobutyrate 2,2,4-TRIMETHYL-1,3-PENTANEDIOL DIISOBUTYRATE 17 ISOPROPYL ETHER 17 Isopropylideneacetone MESITYL OXIDE 17 Isopropyl oxide ISOPROPYL ETHER 17 4-Isopropyltoluene P-CYMENE 17

140

Methyl glycol PROPYLENE GLYCOL 18 5-Methylheptan-3-one ETHYL AMYL KETONE 17 5-Methyl-3-heptanone ETHYL AMYL KETONE 17 5-Methylhexan-2-one METHYL AMYL KETONE 17 Methylhexylcarbinol OCTANOL (ALL ISOMERS) 17 Methyl 2-hydroxybenzoate METHYL SALICYLATE 17 Methyl o-hydroxybenzoate METHYL SALICYLATE 17 2-Methyl-2-hydroxy-3-butyne METHYLBUTYNOL 17 2-METHYL-2-HYDROXY-3-BUTYNE 17 2,2'-(Methylimino)diethanol METHYL DIETHANOLAMINE 17 N-Methyl-2,2'-iminodiethanol METHYL DIETHANOLAMINE 17 Methyl isoamyl ketone METHYL AMYL KETONE 17 Methyl isobutenyl ketone MESITYL OXIDE 17 Methylisobutylcarbinol METHYLAMYL ALCOHOL 17 Methylisobutylcarbinol acetate METHYLAMYL ACETATE 17 METHYL ISOBUTYL KETONE 17 p-Methylisopropyl benzene P-CYMENE 17 2-Methyllactonitrile ACETONE CYANOHYDRIN 17 methyl mercaptopropionaldehyde 3-(METHYLTHIO)PROPIONALDEHYDE 17 METHYL METHACRYLATE 17 Methyl methanoate METHYL FORMATE 17 3-METHYL-3-METHOXYBUTANOL 17 Methyl alpha-methylacrylate METHYL METHACRYLATE 17 7-Methyl-3-methylene-1,6-octadiene MYRCENE 17 Methyl 2-methylprop-2-enoate METHYL METHACRYLATE 17 METHYL NAPHTHALENE (MOLTEN) 17 alpha-Methylnaphthalene (molten) (a) METHYL NAPHTHALENE (MOLTEN) 17 beta-Methylnaphthalene (molten) (a) METHYL NAPHTHALENE (MOLTEN) 17 (o- and p-) Methylnitrobenzene O- OR P-NITROTOLUENES 17 8-Methylnonan-1-ol DECYL ALCOHOL (ALL ISOMERS) 17 Methylolpropane N-BUTYL ALCOHOL 18 alpha-Methyl-omega-methoxypoly(ethylene oxide) POLYETHYLENE GLYCOL DIMETHYL ETHER 17 alpha-Methyl-omega-methoxypoly(oxy-1,2-ethanediyl) POLYETHYLENE GLYCOL DIMETHYL ETHER 17

145

Bilaga

Index Name Product Name Chapter

alpha-Methyl-omega-methoxypoly(oxyethylene) POLYETHYLENE GLYCOL DIMETHYL ETHER 17 Methyloxirane PROPYLENE OXIDE 17 2-Methyl-2,4-pentanediol HEXYLENE GLYCOL 18 2-Methylpentane-2,4-diol HEXYLENE GLYCOL 18 4-Methylpentanol-2 METHYLAMYL ALCOHOL 17 4-Methylpentan-2-ol METHYLAMYL ALCOHOL 17 4-Methyl-2-pentanol acetate METHYLAMYL ACETATE 17 4-Methyl-2-pentanone METHYL ISOBUTYL KETONE 17 4-Methylpentan-2-one METHYL ISOBUTYL KETONE 17 2-Methylpentene (a) HEXENE (ALL ISOMERS) 17 2-Methylpent-1-ene (a) HEXENE (ALL ISOMERS) 17 2-Methyl-1-pentene (a) HEXENE (ALL ISOMERS) 17 4-Methyl-1-pentene (a) HEXENE (ALL ISOMERS) 17 4-Methyl-3-penten-2-one MESITYL OXIDE 17 4-Methylpent-3-en-2-one MESITYL OXIDE 17 4-Methyl-2-pentyl acetate METHYLAMYL ACETATE 17 Methylpentyl acetates METHYLAMYL ACETATE 17 Methyl tert-pentyl ether TERT-AMYL METHYL ETHER 17 Methyl pentyl ketone METHYL AMYL KETONE 17 2-Methyl-m-phenylenediamine (a) TOLUENEDIAMINE 17 4-Methyl-m-phenylenediamine (a) TOLUENEDIAMINE 17 Methylphenylene diisocyanate TOLUENE DIISOCYANATE 17 4-methyl-1,3-phenylene diisocyanate TOLUENE DIISOCYANATE 17 4-Methyl-m-phenylene diisocyanate TOLUENE DIISOCYANATE 17 2-Methyl-2-phenylpropane (a) BUTYLBENZENE (ALL ISOMERS) 17 2-Methylpropanal (a) BUTYRALDEHYDE (ALL ISOMERS) 17 2-METHYL-1,3-PROPANEDIOL 17 2-Methyl-1-propanol ISOBUTYL ALCOHOL 17 2-Methylpropan-1-ol ISOBUTYL ALCOHOL 17 2-Methyl-2-propanol TERT-BUTYL ALCOHOL 17 2-Methylpropan-2-ol TERT-BUTYL ALCOHOL 17 2-Methylprop-2-enenitrile METHACRYLONITRILE 17 2-Methylpropenoic acid METHACRYLIC ACID 17 alpha-Methylpropenoic acid METHACRYLIC ACID 17 2-Methylprop-1-enyl methyl ketone MESITYL OXIDE 17 2-Methylpropyl acrylate (a) BUTYL ACRYLATE (ALL ISOMERS) 17 2-Methyl-1-propyl alcohol ISOBUTYL ALCOHOL 17 2-Methyl-2-propyl alcohol TERT-BUTYL ALCOHOL 17 Methylpropylcarbinol SEC-AMYL ALCOHOL 17 2-Methylpropyl formate ISOBUTYL FORMATE 17 METHYL PROPYL KETONE 18 2-METHYLPYRIDINE 17 3-METHYLPYRIDINE 17 4-METHYLPYRIDINE 17 alpha-Methylpyridine 2-METHYLPYRIDINE 17 1-Methylpyrrolidin-2-one N-METHYL-2-PYRROLIDONE 17

146

Oxymethylene FORMALDEHYDE SOLUTIONS (45% OR LESS) 17 PALM ACID OIL 17 PALM FATTY ACID DISTILLATE 17 PALM KERNEL ACID OIL 17 PALM KERNEL FATTY ACID DISTILLATE 17 PALM KERNEL OIL 17 PALM KERNEL OLEIN 17 PALM KERNEL STEARIN 17 PALM MID-FRACTION 17 PALM OIL 17

150

Bilaga

Index Name Product Name Chapter

PALM OIL FATTY ACID METHYL ESTER 17 PALM OLEIN 17 PALM STEARIN 17 Paraffin PARAFFIN WAX 17 Paraffin jelly PETROLATUM 17 Paraffin scale PARAFFIN WAX 17 n-Paraffins (C10-C20) (a) N-ALKANES (C10+) 17 PARAFFIN WAX 17 PARALDEHYDE 17 PARALDEHYDE-AMMONIA REACTION 17

PRODUCT

Pelargonic acid NONANOIC ACID (ALL ISOMERS) 17 Pelargonic alcohol NONYL ALCOHOL (ALL ISOMERS) 17 PENTACHLOROETHANE 17 Pentadecanol (a) ALCOHOLS (C13+) 17 1-Pentadecene OLEFINS (C13+, ALL ISOMERS) 17 Pentadec-1-ene (a) OLEFINS (C13+, ALL ISOMERS) 17 1,3-PENTADIENE 17 Penta-1,3-diene 1,3-PENTADIENE 17 1,3-PENTADIENE (GREATER THAN 50%), 17

CYCLOPENTENE AND ISOMERS, MIXTURES

Pentaethylene glycol (a) POLYETHYLENE GLYCOL 17 PENTAETHYLENEHEXAMINE 17 Pentalin PENTACHLOROETHANE 17 Pentamethylene CYCLOPENTANE 17 2,2,4,6,6-Pentamethyl-4-heptanethiol (a) TERT-DODECANETHIOL 17 Pentanal VALERALDEHYDE (ALL ISOMERS) 17 Pentane (a) PENTANE (ALL ISOMERS) 17 PENTANE (ALL ISOMERS) 17 Pentanedial solutions, 50% or less GLUTARALDEHYDE SOLUTIONS (50% OR LESS) 17 n-Pentane (a) PENTANE (ALL ISOMERS) 17 PENTANOIC ACID 17 N-PENTANOIC ACID (64%)/2-METHYL BUTYRIC 17

ACID (36%) MIXTURE

tert-Pentanoic acid TRIMETHYLACETIC ACID 17 1-Pentanol N-AMYL ALCOHOL 17 Pentan-1-ol N-AMYL ALCOHOL 17 2-Pentanol SEC-AMYL ALCOHOL 17 Pentan-2-ol SEC-AMYL ALCOHOL 17 3-Pentanol SEC-AMYL ALCOHOL 17 Pentan-3-ol SEC-AMYL ALCOHOL 17 1-Pentanol acetate (a) AMYL ACETATE (ALL ISOMERS) 17 n-Pentanol N-AMYL ALCOHOL 17 sec-Pentanol SEC-AMYL ALCOHOL 17 tert-Pentanol TERT-AMYL ALCOHOL 17 2-Pentanone METHYL PROPYL KETONE 18 Pentan-2-one METHYL PROPYL KETONE 18

151

Bilaga

Index Name Product Name Chapter

Pentasodium diethylenetriaminepentaacetate solution DIETHYLENETRIAMINEPENTAACETIC ACID, 17

PENTASODIUM SALT SOLUTION

PENTENE (ALL ISOMERS) 17 Pent-1-ene (a) PENTENE (ALL ISOMERS) 17 n-Pentene (a) PENTENE (ALL ISOMERS) 17 Pentenes PENTENE (ALL ISOMERS) 17 Pentyl acetate (a) AMYL ACETATE (ALL ISOMERS) 17 sec-Pentyl acetate (a) AMYL ACETATE (ALL ISOMERS) 17 Pentyl alcohol N-AMYL ALCOHOL 17 sec-Pentyl alcohol SEC-AMYL ALCOHOL 17 tert-Pentyl alcohol TERT-AMYL ALCOHOL 17 Pentyl propanoate N-PENTYL PROPIONATE 17 N-PENTYL PROPIONATE 17 PERCHLOROETHYLENE 17 Perchloromethane CARBON TETRACHLORIDE 17 Perhydroazepine HEXAMETHYLENEIMINE 17 PETROLATUM 17 Petroleum jelly PETROLATUM 17 Phene BENZENE AND MIXTURES HAVING 10% BENZENE OR 17

MORE (I)

Phenic acid PHENOL 17 PHENOL 17 2-Phenoxyethanol ETHYLENE GLYCOL PHENYL ETHER 17 Phenyl alkane(C10-C21)sulphonate (a) ALKYL SULPHONIC ACID ESTER OF PHENOL 17 Phenylamine ANILINE 17 N-Phenylaniline DIPHENYLAMINE (MOLTEN) 17 N-Phenylbenzenamine DIPHENYLAMINE (MOLTEN) 17 1-Phenylbutane (a) BUTYLBENZENE (ALL ISOMERS) 17 2-Phenylbutane (a) BUTYLBENZENE (ALL ISOMERS) 17 Phenyl carbinol BENZYL ALCOHOL 17 Phenyl 'cellosolve' ETHYLENE GLYCOL PHENYL ETHER 17 Phenyl chloride CHLOROBENZENE 17 1-Phenyldecane (b) ALKYL(C9+)BENZENES 17 1-Phenyldodecane ALKYL(C9+)BENZENES 17 Phenylethane ETHYLBENZENE 17 Phenyl ether DIPHENYL ETHER 17 Phenylethylene STYRENE MONOMER 17 1-(Phenylethyl)xylene 1-PHENYL-1-XYLYL ETHANE 17 Phenyl hydride BENZENE AND MIXTURES HAVING 10% BENZENE OR 17

MORE (I)

Phenyl hydroxide PHENOL 17 Phenylic acid PHENOL 17 Phenylmethane TOLUENE 17 Phenylmethanol BENZYL ALCOHOL 17 Phenylmethyl acetate BENZYL ACETATE 17 1-Phenylpropane (a) PROPYLBENZENE (ALL ISOMERS) 17 2-Phenylpropane (a) PROPYLBENZENE (ALL ISOMERS) 17 2-Phenylpropene ALPHA-METHYLSTYRENE 17

152

Bilaga

Index Name Product Name Chapter

1-Phenyltetradecane ALKYL(C9+)BENZENES 17 1-Phenyltridecane ALKYL(C9+)BENZENES 17 1-Phenylundecane ALKYL(C9+)BENZENES 17 Phenylxylylethane 1-PHENYL-1-XYLYL ETHANE 17 1-PHENYL-1-XYLYL ETHANE 17 1-Phenyl-1-(2,5-xylyl)ethane (a) 1-PHENYL-1-XYLYL ETHANE 17 1-Phenyl-1-(3,4-xylyl)ethane (a) 1-PHENYL-1-XYLYL ETHANE 17 PHOSPHATE ESTERS, ALKYL (C12-C14) AMINE 17 L-alpha-Phosphatidyl choline LECITHIN 18 N-(phosphonomethyl)glycine GLYPHOSATE SOLUTION (NOT CONTAINING 17

SURFACTANT)

PHOSPHORIC ACID 17 PHOSPHORUS, YELLOW OR WHITE 17 Phthalandione (molten) PHTHALIC ANHYDRIDE (MOLTEN) 17 Phthalic acid anhydride (molten) PHTHALIC ANHYDRIDE (MOLTEN) 17 Phthalic acid, diundecyl ester DIUNDECYL PHTHALATE 17 PHTHALIC ANHYDRIDE (MOLTEN) 17 2-Picoline 2-METHYLPYRIDINE 17 3-Picoline 3-METHYLPYRIDINE 17 4-Picoline 4-METHYLPYRIDINE 17 alpha-Picoline 2-METHYLPYRIDINE 17 beta-Picoline 3-METHYLPYRIDINE 17 gamma-Picoline 4-METHYLPYRIDINE 17 Pimelic ketone CYCLOHEXANONE 17 2-Pinene ALPHA-PINENE 17 2(10)-Pinene BETA-PINENE 17 ALPHA-PINENE 17 BETA-PINENE 17 PINE OIL 17 2-Piperazin-1-ylethylamine N-AMINOETHYLPIPERAZINE 17 Piperylene 1,3-PENTADIENE 17 Piperylene concentrates (Mixed) 1,3-PENTADIENE (GREATER THAN 50%), 17

CYCLOPENTENE AND ISOMERS, MIXTURES

Pivalic acid TRIMETHYLACETIC ACID 17 Poly(oxyethylene) POLYETHER (MOLECULAR WEIGHT 1350+) 17 Poly(oxyethyleneoxyethyleneoxyphthaloyl) DIETHYLENE GLYCOL PHTHALATE 17 Poly(sodium carboxylatoethylene) SODIUM POLY(4+)ACRYLATE SOLUTIONS 17 POLYACRYLIC ACID SOLUTION (40% OR LESS) 17 POLYALKYL (C18-C22) ACRYLATE IN XYLENE 17 POLYALKYLALKENAMINESUCCINIMIDE, 17

MOLYBDENUM OXYSULPHIDE

POLY(2-8)ALKYLENE GLYCOL MONOALKYL 17

(C1-C6) ETHER

POLY(2-8)ALKYLENE GLYCOL MONOALKYL 17

(C1-C6) ETHER ACETATE

Poly (2-8) alkylene (C2-C3) glycols / Polyalkylene (C2- BRAKE FLUID BASE MIX: POLY(2-8)ALKYLENE (C2-C3) 17 C10) glycol monoalkyl (C1-C4) ethers and their borate GLYCOLS/POLYALKYLENE (C2-C10) GLYCOLS esters (a) MONOALKYL (C1-C4) ETHERS AND THEIR BORATE

ESTERS

POLYALKYL (C10-C20) METHACRYLATE 17

153

Bilaga

Index Name Product Name Chapter

POLYALKYL (C10-C18) 17

METHACRYLATE/ETHYLENE-PROPYLENE COPOLYMER MIXTURE

POLYALUMINIUM CHLORIDE SOLUTION 18 POLYBUTENE 17 POLYBUTENYL SUCCINIMIDE 17 POLY(2+)CYCLIC AROMATICS 17 POLYETHER (MOLECULAR WEIGHT 1350+) 17 POLYETHYLENE GLYCOL 17 Poly(4-12)ethylene glycol alkyl(C7-C11)phenyl ether NONYLPHENOL POLY(4+)ETHOXYLATE 17 POLYETHYLENE GLYCOL DIMETHYL ETHER 17 POLY(ETHYLENE GLYCOL) METHYLBUTENYL 17

ETHER (MW>1000)

Polyethylene glycols, mono(p-nonylphenyl) ether (b) ALKARYL POLYETHERS (C9-C20) 17 Poly(ethylene oxide) (molecular weight 1350+) (a) POLYETHER (MOLECULAR WEIGHT 1350+) 17 POLYETHYLENE POLYAMINES 17 POLYETHYLENE POLYAMINES (MORE THAN 17

50% C5 -C20 PARAFFIN OIL)

POLYFERRIC SULPHATE SOLUTION 17 Polyglucitol HYDROGENATED STARCH HYDROLYSATE 18 POLYGLYCERIN, SODIUM SALT SOLUTION 18

(CONTAINING LESS THAN 3% SODIUM HYDROXIDE)

Polyglycitol syrup HYDROGENATED STARCH HYDROLYSATE 18 POLY(IMINOETHYLENE)-GRAFT-N-POLY 17

(ETHYLENEOXY) SOLUTION (90% OR LESS)

POLYISOBUTENAMINE IN ALIPHATIC (C10-C14) 17

SOLVENT

POLYISOBUTENYL ANHYDRIDE ADDUCT 17 Polyisobutylene POLY(4+)ISOBUTYLENE 17 POLY(4+)ISOBUTYLENE 17 POLYMETHYLENE POLYPHENYL ISOCYANATE 17 POLYOLEFIN (MOLECULAR WEIGHT 300+) 17 POLYOLEFIN AMIDE ALKENEAMINE (C17+) 17 POLYOLEFIN AMIDE ALKENEAMINE BORATE 17

(C28-C250)

POLYOLEFIN AMIDE ALKENEAMINE POLYOL 17 POLYOLEFINAMINE (C28-C250) 17 POLYOLEFINAMINE IN ALKYL (C2-C4) 17

BENZENES

POLYOLEFINAMINE IN AROMATIC SOLVENT 17 POLYOLEFIN AMINOESTER SALTS 17

(MOLECULAR WEIGHT 2000+)

POLYOLEFIN ANHYDRIDE 17 POLYOLEFIN ESTER (C28-C250) 17 POLYOLEFIN PHENOLIC AMINE (C28-C250) 17 POLYOLEFIN PHOSPHOROSULPHIDE, BARIUM 17

DERIVATIVE (C28-C250)

Poly(oxyalkylene)alkenyl ether (MW>1000) POLY(ETHYLENE GLYCOL) METHYLBUTENYL ETHER 17

(MW>1000)

Poly(oxy-1,2-ethanediyl), alpha-(3-methyl-3-butenyl)-, POLY(ETHYLENE GLYCOL) METHYLBUTENYL ETHER 17 omega-hydroxy- (MW>1000)

154

Bilaga

Index Name Product Name Chapter

POLY(20)OXYETHYLENE SORBITAN 17

MONOOLEATE

Poly(oxypropylene) (molecular weight 1350+) (a) POLYETHER (MOLECULAR WEIGHT 1350+) 17 poly[(phenyl isocyanate)-alt-formaldehyde] (a) POLYMETHYLENE POLYPHENYL ISOCYANATE 17 Poly[(phenyl isocyanate)-co-formaldehyde] (a) POLYMETHYLENE POLYPHENYL ISOCYANATE 17 Poly[propene oxide] POLYETHER (MOLECULAR WEIGHT 1350+) 17 Polypropylene POLY(5+)PROPYLENE 17 POLY(5+)PROPYLENE 17 POLYPROPYLENE GLYCOL 17 POLYSILOXANE 17 Potash lye solution POTASSIUM HYDROXIDE SOLUTION 17 Potassium chloride brine (<26%) POTASSIUM CHLORIDE SOLUTION (LESS THAN 26%) 18 Potassium chloride drilling brine POTASSIUM CHLORIDE SOLUTION 17 POTASSIUM CHLORIDE SOLUTION 17 POTASSIUM CHLORIDE SOLUTION (LESS THAN 18

26%)

POTASSIUM FORMATE SOLUTIONS 18 POTASSIUM HYDROXIDE SOLUTION 17 POTASSIUM OLEATE 17 POTASSIUM THIOSULPHATE (50% OR LESS) 17 Propanal PROPIONALDEHYDE 17 Propan-1-amine N-PROPYLAMINE 17 2-Propanamine ISOPROPYLAMINE 17 1,2-Propanediol PROPYLENE GLYCOL 18 Propane-1,2-diol PROPYLENE GLYCOL 18 1,2-Propanediol cyclic carbonate PROPYLENE CARBONATE 18 Propanenitrile PROPIONITRILE 17 1,2,3-Propanetriol GLYCERINE 18 Propane-1,2,3-triol GLYCERINE 18 1,2,3-Propanetriol triacetate GLYCERYL TRIACETATE 17 Propanoic acid PROPIONIC ACID 17 Propanoic anhydride PROPIONIC ANHYDRIDE 17 Propanol N-PROPYL ALCOHOL 17 1-Propanol N-PROPYL ALCOHOL 17 Propan-1-ol N-PROPYL ALCOHOL 17 2-Propanol ISOPROPYL ALCOHOL 18 Propan-2-ol ISOPROPYL ALCOHOL 18 N-PROPANOLAMINE 17 3-Propanolide BETA-PROPIOLACTONE 17 n-Propanol N-PROPYL ALCOHOL 17 Propanone ACETONE 18 2-Propanone ACETONE 18 Propan-2-one ACETONE 18 Propenamide solution, 50% or less ACRYLAMIDE SOLUTION (50% OR LESS) 17 2-PROPENE-1-AMINIUM, N,N-DIMETHYL-N-2- 17

PROPENYL-, CHLORIDE, HOMOPOLYMER SOLUTION

Propenenitrile ACRYLONITRILE 17

155

Bilaga

Index Name Product Name Chapter

Propene oxide PROPYLENE OXIDE 17 Propenoic acid ACRYLIC ACID 17 2-Propenoic acid, homopolymer solution (40% or less) POLYACRYLIC ACID SOLUTION (40% OR LESS) 17 1-Propenol-3 ALLYL ALCOHOL 17 2-Propen-1-ol ALLYL ALCOHOL 17 Prop-2-en-1-ol ALLYL ALCOHOL 17 Propenyl alcohol ALLYL ALCOHOL 17 Propiolactone BETA-PROPIOLACTONE 17 BETA-PROPIOLACTONE 17 PROPIONALDEHYDE 17 PROPIONIC ACID 17 Propionic aldehyde PROPIONALDEHYDE 17 PROPIONIC ANHYDRIDE 17 PROPIONITRILE 17 beta-Propionolactone BETA-PROPIOLACTONE 17 Propiononitrile PROPIONITRILE 17 Propionyl oxide PROPIONIC ANHYDRIDE 17 1-Propoxypropan-2-ol (a) PROPYLENE GLYCOL MONOALKYL ETHER 17 Propyl acetate N-PROPYL ACETATE 17 N-PROPYL ACETATE 17 Propyl acetone METHYL BUTYL KETONE 17 Propyl alcohol N-PROPYL ALCOHOL 17 2-Propyl alcohol ISOPROPYL ALCOHOL 18 N-PROPYL ALCOHOL 17 sec-Propyl alcohol ISOPROPYL ALCOHOL 18 Propyl aldehyde PROPIONALDEHYDE 17 Propylamine N-PROPYLAMINE 17 N-PROPYLAMINE 17 PROPYLBENZENE (ALL ISOMERS) 17 n-Propylbenzene (a) PROPYLBENZENE (ALL ISOMERS) 17 Propylcarbinol N-BUTYL ALCOHOL 18 Propylene aldehyde CROTONALDEHYDE 17 2,2'-[Propylenebis(nitrilomethylene)]diphenol in aromatic ALKYL (C8-C9) PHENYLAMINE IN AROMATIC 17 solvent SOLVENTS PROPYLENE CARBONATE 18 Propylene chloride 1,2-DICHLOROPROPANE 17 Propylene dichloride 1,2-DICHLOROPROPANE 17 alpha,alpha'- (Propylenedinitrilo)di-o-cresol in aromatic ALKYL (C8-C9) PHENYLAMINE IN AROMATIC 17 solvent SOLVENTS Propylene epoxide PROPYLENE OXIDE 17 PROPYLENE GLYCOL 18 1,2-Propylene glycol PROPYLENE GLYCOL 18 Propylene glycol n-butyl ether (a) PROPYLENE GLYCOL MONOALKYL ETHER 17 Propylene glycol ethyl ether (a) PROPYLENE GLYCOL MONOALKYL ETHER 17 Propylene glycol methyl ether (a) PROPYLENE GLYCOL MONOALKYL ETHER 17 PROPYLENE GLYCOL METHYL ETHER 17

ACETATE

PROPYLENE GLYCOL MONOALKYL ETHER 17

156

Bilaga

Index Name Product Name Chapter

Propylene glycol monobutyl ether (a) PROPYLENE GLYCOL MONOALKYL ETHER 17 Propylene glycol beta-monoethyl ether PROPYLENE GLYCOL MONOALKYL ETHER 17 Propylene glycol monomethyl ether (a) PROPYLENE GLYCOL MONOALKYL ETHER 17 PROPYLENE GLYCOL PHENYL ETHER 17 Propylene glycol propyl ether (a) PROPYLENE GLYCOL MONOALKYL ETHER 17 Propylene glycol trimer TRIPROPYLENE GLYCOL 17 1,2-Propylene glycol trimer TRIPROPYLENE GLYCOL 17 PROPYLENE OXIDE 17 PROPYLENE TETRAMER 17 PROPYLENE TRIMER 17 Propylethylene (a) PENTENE (ALL ISOMERS) 17 Propyl methyl ketone METHYL PROPYL KETONE 18 N-Propyl-1-propanamine DI-N-PROPYLAMINE 17 Pseudobutylene glycol BUTYLENE GLYCOL 17 Pseudocumene TRIMETHYLBENZENE (ALL ISOMERS) 17 Pseudopinen BETA-PINENE 17 Psuedopinene BETA-PINENE 17 Pygas PYROLYSIS GASOLINE (CONTAINING BENZENE) 17 PYRIDINE 17 Pyroacetic acid ACETONE 18 Pyroacetic ether ACETONE 18 PYROLYSIS GASOLINE (CONTAINING 17

BENZENE)

Pyrolysis gasoline (steam-cracked naphtha) BENZENE AND MIXTURES HAVING 10% BENZENE OR 17

MORE (I)

Pyrolysis gasoline, containing 10% or more benzene BENZENE AND MIXTURES HAVING 10% BENZENE OR 17

MORE (I)

Pyromucic aldehyde FURFURAL 17 RAPESEED OIL 17 RAPESEED OIL (LOW ERUCIC ACID 17

CONTAINING LESS THAN 4% FREE FATTY ACIDS)

RAPE SEED OIL FATTY ACID METHYL ESTERS 17 RESIN OIL, DISTILLED 17 RICE BRAN OIL 17 ROSIN 17 SAFFLOWER OIL 17 Saturated fatty acid (C13 and above) (a) FATTY ACID (SATURATED C13+) 17 SHEA BUTTER 17 Sludge acid SULPHURIC ACID, SPENT 17 Soda ash solution SODIUM CARBONATE SOLUTION 17 Soda lye solution SODIUM HYDROXIDE SOLUTION 17 SODIUM ACETATE SOLUTIONS 18 Sodium acid sulphite solution (45% or less) SODIUM HYDROGEN SULPHITE SOLUTION (45% OR 17

LESS)

Sodium alkylbenzene sulphonate solution ALKYLBENZENE SULPHONIC ACID, SODIUM SALT 17

SOLUTION

SODIUM ALKYL (C14-C17) SULPHONATES (60- 17

65% SOLUTION)

SODIUM ALUMINOSILICATE SLURRY 17

157

Bilaga

Index Name Product Name Chapter

Sodium aminoacetate solution GLYCINE, SODIUM SALT SOLUTION 17 SODIUM BENZOATE 17 Sodium 1,3-benzothiazole-2-thiolate solution MERCAPTOBENZOTHIAZOL, SODIUM SALT 17

SOLUTION

Sodium 1,3-benzothiazol-2-yl sulphide solution MERCAPTOBENZOTHIAZOL, SODIUM SALT 17

SOLUTION

SODIUM BICARBONATE SOLUTION (LESS 18

THAN 10%)

Sodium bichromate solution (70% or less) SODIUM DICHROMATE SOLUTION (70% OR LESS) 17 Sodium bisulphide solution (45% or less) SODIUM HYDROSULPHIDE SOLUTION (45% OR LESS) 17 SODIUM BOROHYDRIDE (15% OR 17

LESS)/SODIUM HYDROXIDE SOLUTION

SODIUM BROMIDE SOLUTION (LESS THAN 17

50%) (*)

SODIUM CARBONATE SOLUTION 17 SODIUM CHLORATE SOLUTION (50% OR LESS) 17 Sodium cresylate solution CRESYLIC ACID, SODIUM SALT SOLUTION 17 SODIUM DICHROMATE SOLUTION (70% OR 17

LESS)

Sodium glycinate solution GLYCINE, SODIUM SALT SOLUTION 17 Sodium hydrate solution SODIUM HYDROXIDE SOLUTION 17 SODIUM HYDROGEN SULPHIDE (6% OR 17

LESS)/SODIUM CARBONATE (3% OR LESS) SOLUTION

Sodium hydrogensulphide solution (45% or less) SODIUM HYDROSULPHIDE SOLUTION (45% OR LESS) 17 SODIUM HYDROGEN SULPHITE SOLUTION 17

(45% OR LESS)

SODIUM HYDROSULPHIDE/AMMONIUM 17

SULPHIDE SOLUTION

SODIUM HYDROSULPHIDE SOLUTION (45% OR 17

LESS)

SODIUM HYDROXIDE SOLUTION 17 SODIUM HYPOCHLORITE SOLUTION (15% OR 17

LESS)

Sodium lignosulphonate LIGNINSULPHONIC ACID, SODIUM SALT SOLUTION 17 Sodium methanolate SODIUM METHYLATE 21-30% IN METHANOL 17 Sodium methoxide SODIUM METHYLATE 21-30% IN METHANOL 17 SODIUM METHYLATE 21-30% IN METHANOL 17 Sodium methylcarbamodithioate METAM SODIUM SOLUTION 17 Sodium N-methyldithiocarbamate METAM SODIUM SOLUTION 17 Sodium methyldithiocarbamate solution METAM SODIUM SOLUTION 17 SODIUM NITRITE SOLUTION 17 SODIUM PETROLEUM SULPHONATE 17 SODIUM POLY(4+)ACRYLATE SOLUTIONS 17 Sodium rhodanate solution (56% or less) SODIUM THIOCYANATE SOLUTION (56% OR LESS) 17 Sodium rhodanide solution (56% or less) SODIUM THIOCYANATE SOLUTION (56% OR LESS) 17 Sodium salt of sulphonated naphthalene - formaldehyde NAPHTHALENESULPHONIC ACID-FORMALDEHYDE 17 condensate COPOLYMER, SODIUM SALT SOLUTION SODIUM SILICATE SOLUTION 17 SODIUM SULPHATE SOLUTIONS 18 SODIUM SULPHIDE SOLUTION (15% OR LESS) 17 SODIUM SULPHITE SOLUTION (25% OR LESS) 17

158

Bilaga

Index Name Product Name Chapter

Sodium sulphocyanate solution (56% or less) SODIUM THIOCYANATE SOLUTION (56% OR LESS) 17 Sodium sulphocyanide solution (56% or less) SODIUM THIOCYANATE SOLUTION (56% OR LESS) 17 Sodium tetrahydroborate (15% or less) / sodium SODIUM BOROHYDRIDE (15% OR LESS)/SODIUM 17 hydroxide solution HYDROXIDE SOLUTION SODIUM THIOCYANATE SOLUTION (56% OR 17

LESS)

Sodium tolyl oxides solution CRESYLIC ACID, SODIUM SALT SOLUTION 17 'D-D Soil fumigant' DICHLOROPROPENE/DICHLOROPROPANE MIXTURES 17 d-Sorbite solution SORBITOL SOLUTION 18 SORBITOL SOLUTION 18 d-Sorbitol solution SORBITOL SOLUTION 18 SOYABEAN OIL 17 Spirit of turpentine TURPENTINE 17 Spirits of wine ETHYL ALCOHOL 18 Stoddard solvent WHITE SPIRIT, LOW (15-20%) AROMATIC 17 STYRENE MONOMER 17 Styrol STYRENE MONOMER 17 Suberane CYCLOHEPTANE 17 Sulfonic acid, alkane(C10-C21) phenyl ester (a) ALKYL SULPHONIC ACID ESTER OF PHENOL 17 SULPHOHYDROCARBON (C3-C88) 17 SULPHOLANE 17 SULPHONATED POLYACRYLATE SOLUTION 18 SULPHUR (MOLTEN) 17 SULPHURIC ACID 17 Sulphuric acid, fuming OLEUM 17 SULPHURIC ACID, SPENT 17 Sulphuric chlorohydrin CHLOROSULPHONIC ACID 17 Sulphuric ether DIETHYL ETHER 17 SULPHURIZED FAT (C14-C20) 17 SULPHURIZED POLYOLEFINAMIDE ALKENE 17

(C28-C250) AMINE

SUNFLOWER SEED OIL 17 Sweet-birch oil METHYL SALICYLATE 17 sym-Dichloroethane ETHYLENE DICHLORIDE 17 sym-Dichloroethyl ether DICHLOROETHYL ETHER 17 sym-Diisopropylacetone DIISOBUTYL KETONE 17 sym-Dimethylethylene glycol BUTYLENE GLYCOL 17 sym-Tetrachloroethane TETRACHLOROETHANE 17 sym-Trioxane 1,3,5-TRIOXANE 17 TALL OIL, CRUDE 17 TALL OIL, DISTILLED 17 TALL OIL FATTY ACID (RESIN ACIDS LESS 17

THAN 20%)

TALL OIL PITCH 17 TALLOW 17 TALLOW FATTY ACID 17 Tar acids (cresols) CRESOLS (ALL ISOMERS) 17 Tar camphor NAPHTHALENE (MOLTEN) 17

159

Bilaga

Index Name Product Name Chapter

Terephthalic acid, dibutyl ester DIBUTYL TEREPHTHALATE 17 3,6,9,12-Tetraazatetradecamethylenediamine PENTAETHYLENEHEXAMINE 17 3,6,9,12-Tetraazatetradecane-1,14-diamine PENTAETHYLENEHEXAMINE 17 1,3,5,7-Tetraazatricyclo[3.3.1.13,7]decane HEXAMETHYLENETETRAMINE SOLUTIONS 18 TETRACHLOROETHANE 17 1,1,2,2-Tetrachloroethane TETRACHLOROETHANE 17 Tetrachloroethylene PERCHLOROETHYLENE 17 1,1,2,2-tetrachloroethylene PERCHLOROETHYLENE 17 Tetrachloromethane CARBON TETRACHLORIDE 17 Tetradecan-1-o1 ALCOHOLS (C14-C18), PRIMARY, LINEAR AND 17

ESSENTIALLY LINEAR

1-Tetradecanol ALCOHOLS (C14-C18), PRIMARY, LINEAR AND 17

ESSENTIALLY LINEAR

Tetradecene (a) OLEFINS (C13+, ALL ISOMERS) 17 Tetradecylbenzene ALKYL(C9+)BENZENES 17 TETRAETHYLENE GLYCOL 17 TETRAETHYLENE PENTAMINE 17 Tetraethyllead MOTOR FUEL ANTI-KNOCK COMPOUND 17

(CONTAINING LEAD ALKYLS)

Tetraethylplumbane MOTOR FUEL ANTI-KNOCK COMPOUND 17

(CONTAINING LEAD ALKYLS)

TETRAETHYL SILICATE 18

MONOMER/OLIGOMER (20% IN ETHANOL)

3a,4,7,7a-Tetrahydro-3,5-dimethyl-4,7-methano-1H- METHYLCYCLOPENTADIENE DIMER 17 indene TETRAHYDROFURAN 17 TETRAHYDRONAPHTHALENE 17 1,2,3,4-Tetrahydronapthalene TETRAHYDRONAPHTHALENE 17 Tetrahydro-1,4-oxazine MORPHOLINE 17 2H-Tetrahydro-1,4-oxazine MORPHOLINE 17 Tetrahydro-2H-1,4-oxazine MORPHOLINE 17 Tetrahydrothiophene-1-dioxide SULPHOLANE 17 Tetrahydrothiophene 1,1-dioxide SULPHOLANE 17 Tetralin TETRAHYDRONAPHTHALENE 17 TETRAMETHYLBENZENE (ALL ISOMERS) 17 1,2,3,4-Tetramethylbenzene (a) TETRAMETHYLBENZENE (ALL ISOMERS) 17 1,2,3,5-Tetramethylbenzene (a) TETRAMETHYLBENZENE (ALL ISOMERS) 17 1,2,4,5-Tetramethylbenzene (a) TETRAMETHYLBENZENE (ALL ISOMERS) 17 Tetramethylene cyanide ADIPONITRILE 17 Tetramethylene dicyanide ADIPONITRILE 17 Tetramethylene glycol (a) BUTYLENE GLYCOL 17 Tetramethylene oxide TETRAHYDROFURAN 17 Tetramethylenesulphone SULPHOLANE 17 Tetramethyllead MOTOR FUEL ANTI-KNOCK COMPOUND 17

(CONTAINING LEAD ALKYLS)

Tetrapropylbenzene ALKYL(C9+)BENZENES 17 Tetrapropylenebenzene DODECYLBENZENE 17 Tetryl formate ISOBUTYL FORMATE 17 4-thiapentanal 3-(METHYLTHIO)PROPIONALDEHYDE 17

160

Bilaga

Index Name Product Name Chapter

Thiophan sulphone SULPHOLANE 17 Thiosulphuric acid, dipotassium salt (50% or less) POTASSIUM THIOSULPHATE (50% OR LESS) 17 Titaniuim(IV) oxide slurry TITANIUM DIOXIDE SLURRY 17 TITANIUM DIOXIDE SLURRY 17 TOLUENE 17 TOLUENEDIAMINE 17 2,4-Toluenediamine (a) TOLUENEDIAMINE 17 2,6-Toluenediamine (a) TOLUENEDIAMINE 17 TOLUENE DIISOCYANATE 17 2-Toluidine O-TOLUIDINE 17 O-TOLUIDINE 17 Toluol TOLUENE 17 o-Tolylamine O-TOLUIDINE 17 2,4-Tolylenediamine (a) TOLUENEDIAMINE 17 2,6-Tolylenediamine (a) TOLUENEDIAMINE 17 Tolylenediisocyanate TOLUENE DIISOCYANATE 17 2,4-Tolylene diisocyanate TOLUENE DIISOCYANATE 17 m-Tolylene diisocyanate TOLUENE DIISOCYANATE 17 Toxilic anhydride MALEIC ANHYDRIDE 17 Treacle (a) MOLASSES 18 Triacetin GLYOXAL SOLUTION (40% OR LESS) 17 3,6,9-Triazaundecamethylenediamine TETRAETHYLENE PENTAMINE 17 3,6,9-Triazaundecane-1,11-diamine TETRAETHYLENE PENTAMINE 17 TRIBUTYL PHOSPHATE 17 1,2,3-TRICHLOROBENZENE (MOLTEN) 17 1,2,4-TRICHLOROBENZENE 17 1,1,1-TRICHLOROETHANE 17 1,1,2-TRICHLOROETHANE 17 beta-Trichloroethane 1,1,2-TRICHLOROETHANE 17 Trichloroethene TRICHLOROETHYLENE 17 TRICHLOROETHYLENE 17 Trichloromethane CHLOROFORM 17 1,2,3-TRICHLOROPROPANE 17 1,1,2-TRICHLORO-1,2,2-TRIFLUOROETHANE 17 TRICRESYL PHOSPHATE (CONTAINING 1% OR 17

MORE ORTHO-ISOMER)

TRICRESYL PHOSPHATE (CONTAINING LESS 17

THAN 1% ORTHO-ISOMER)

TRIDECANE 17 TRIDECANOIC ACID 17 Tridecanol (a) ALCOHOLS (C13+) 17 Tridecene (a) OLEFINS (C13+, ALL ISOMERS) 17 Tridecoic acid TRIDECANOIC ACID 17 TRIDECYL ACETATE 17 Tridecyl alcohol (a) ALCOHOLS (C13+) 17 Tridecylbenzene ALKYL(C9+)BENZENES 17 Tridecylic acid TRIDECANOIC ACID 17

161

Bilaga

Index Name Product Name Chapter

Tridecylic acid (a) FATTY ACID (SATURATED C13+) 17 Tri(dimethylphenyl) phosphate (all isomers) TRIXYLYL PHOSPHATE 17 TRIETHANOLAMINE 17 TRIETHYLAMINE 17 TRIETHYLBENZENE 17 TRIETHYLENE GLYCOL 18 Triethylene glycol butyl ether (a) POLY(2-8)ALKYLENE GLYCOL MONOALKYL(C1-C6) 17

ETHER

Triethylene glycol ethyl ether (a) POLY(2-8)ALKYLENE GLYCOL MONOALKYL(C1-C6) 17

ETHER

Triethylene glycol methyl ether (a) POLY(2-8)ALKYLENE GLYCOL MONOALKYL(C1-C6) 17

ETHER

Triethylene glycol monobutyl ether (a) POLY(2-8)ALKYLENE GLYCOL MONOALKYL(C1-C6) 17

ETHER

TRIETHYLENETETRAMINE 17 TRIETHYL PHOSPHATE 17 TRIETHYL PHOSPHITE 17 Triformol 1,3,5-TRIOXANE 17 Triglycol TRIETHYLENE GLYCOL 18 Trihydroxypropane GLYCERINE 18 Trihydroxytriethylamine TRIETHANOLAMINE 17 TRIISOPROPANOLAMINE 17 TRIISOPROPYLATED PHENYL PHOSPHATES 17 TRIMETHYLACETIC ACID 17 TRIMETHYLAMINE SOLUTION (30% OR LESS) 17 TRIMETHYLBENZENE (ALL ISOMERS) 17 1,2,3-Trimethylbenzene (a) TRIMETHYLBENZENE (ALL ISOMERS) 17 1,2,4-Trimethylbenzene (a) TRIMETHYLBENZENE (ALL ISOMERS) 17 1,3,5-Trimethylbenzene (a) TRIMETHYLBENZENE (ALL ISOMERS) 17 2,6,6-Trimethylbicyclo[3.1.1]hept-2-ene ALPHA-PINENE 17 Trimethylcarbinol TERT-BUTYL ALCOHOL 17 1,1,3-Trimethyl-3-cyclohexene-5-one ISOPHORONE 17 3,5,5-Trimethylcyclohex-2-enone ISOPHORONE 17 3,5,5-Trimethylcyclohex-2-en-one ISOPHORONE 17 TRIMETHYLOL PROPANE PROPOXYLATED 17 2,2,4-Trimethylpentane (a) OCTANE (ALL ISOMERS) 17 2,2,4-TRIMETHYL-1,3-PENTANEDIOL 17

DIISOBUTYRATE

2,2,4-Trimethylpentane-1,3-diol diisobutyrate 2,2,4-TRIMETHYL-1,3-PENTANEDIOL DIISOBUTYRATE 17 2,2,4-TRIMETHYL-1,3-PENTANEDIOL-1- 17

ISOBUTYRATE

2,4,4-Trimethylpentene-1 DIISOBUTYLENE 17 2,4,4-Trimethylpent-1-ene DIISOBUTYLENE 17 2,4,4-Trimethylpentene-2 DIISOBUTYLENE 17 2,4,4-Trimethylpent-2-ene DIISOBUTYLENE 17 2,4,6-Trimethyl-1,3,5-trioxane PARALDEHYDE 17 2,4,6-Trimethyl-s-trioxane PARALDEHYDE 17 Trioxan 1,3,5-TRIOXANE 17 1,3,5-TRIOXANE 17

162

Bilaga

Index Name Product Name Chapter

5,8,11-Trioxapentadecane DIETHYLENE GLYCOL DIBUTYL ETHER 17 3,6,9-Trioxaundecane DIETHYLENE GLYCOL DIETHYL ETHER 17 Trioxymethylene 1,3,5-TRIOXANE 17 Tripropylene PROPYLENE TRIMER 17 TRIPROPYLENE GLYCOL 17 Tripropylene glycol methyl ether (a) POLY(2-8)ALKYLENE GLYCOL MONOALKYL(C1-C6) 17

ETHER

Tris(dimethylphenyl) phosphate (all isomers) TRIXYLYL PHOSPHATE 17 Tris(2-hydroxyethyl)amine TRIETHANOLAMINE 17 2,4-D-tris(2-hydroxy-2-methylethyl)ammonium 2,4-DICHLOROPHENOXYACETIC ACID, 17

TRIISOPROPANOLAMINE SALT SOLUTION

Tris(2-hydroxypropyl)amine TRIISOPROPANOLAMINE 17 Tris(2-hydroxy-1-propyl)amine TRIISOPROPANOLAMINE 17 Tris(2-hydroxypropyl)ammonium 2,4- 2,4-DICHLOROPHENOXYACETIC ACID, 17 dichlorophenoxyacetate solution TRIISOPROPANOLAMINE SALT SOLUTION Trisodium 2-[carboxylatomethyl(2-hydroxyethyl)amino] N-(HYDROXYETHYL)ETHYLENEDIAMINETRIACETIC 17 ethyliminodi(acetate) solution ACID, TRISODIUM SALT SOLUTION Trisodium N-(carboxymethyl)-N'-(2-hydroxyethyl)-N,N'- N-(HYDROXYETHYL)ETHYLENEDIAMINETRIACETIC 17 ethylenediglycine solution ACID, TRISODIUM SALT SOLUTION Trisodium N-(2-hydroxyethyl)ethylenediamine-N,N',N'- N-(HYDROXYETHYL)ETHYLENEDIAMINETRIACETIC 17 triacetate solution ACID, TRISODIUM SALT SOLUTION Trisodium nitrilotriacetate solution NITRILOTRIACETIC ACID, TRISODIUM SALT 17

SOLUTION

Tritolyl phosphate, containing less than 1% ortho- isomer TRICRESYL PHOSPHATE (CONTAINING LESS THAN 17

1% ORTHO-ISOMER)

Tritolyl phosphate, containing 1% or more ortho- isomer TRICRESYL PHOSPHATE (CONTAINING 1% OR MORE 17

ORTHO-ISOMER)

Trixylenyl phosphate TRIXYLYL PHOSPHATE 17 TRIXYLYL PHOSPHATE 17 TUNG OIL 17 TURPENTINE 17 Turpentine oil TURPENTINE 17 Turps TURPENTINE 17 Type A Zeolite slurry (a) SODIUM ALUMINOSILICATE SLURRY 17 1-Undecanecarboxylic acid LAURIC ACID 17 N-Undecane (a) N-ALKANES (C10+) 17 UNDECANOIC ACID 17 Undecan-1-ol UNDECYL ALCOHOL 17 1-UNDECENE 17 Undec-1-ene 1-UNDECENE 17 UNDECYL ALCOHOL 17 Undecylbenzene ALKYL(C9+)BENZENES 17 Undecylic acid UNDECANOIC ACID 17 n-Undecylic acid UNDECANOIC ACID 17 uns-Trimethylbenzene (a) TRIMETHYLBENZENE (ALL ISOMERS) 17 unsym-Trichlorobenzene 1,2,4-TRICHLOROBENZENE 17 UREA/AMMONIUM NITRATE SOLUTION 17 UREA/AMMONIUM NITRATE SOLUTION 17

(CONTAINING LESS THAN 1% FREE AMMONIA)

UREA/AMMONIUM PHOSPHATE SOLUTION 17 UREA SOLUTION 17

163

Bilaga

Index Name Product Name Chapter

Valeral VALERALDEHYDE (ALL ISOMERS) 17 VALERALDEHYDE (ALL ISOMERS) 17 n-Valeraldehyde VALERALDEHYDE (ALL ISOMERS) 17 Valerianic acid PENTANOIC ACID 17 Valeric acid PENTANOIC ACID 17 n-Valeric acid PENTANOIC ACID 17 Valeric aldehyde VALERALDEHYDE (ALL ISOMERS) 17 Valerone DIISOBUTYL KETONE 17 VEGETABLE ACID OILS (M) 17 VEGETABLE FATTY ACID DISTILLATES (M) 17 VEGETABLE PROTEIN SOLUTION 18

(HYDROLYSED)

Vinegar acid ACETIC ACID 17 Vinegar naphtha ETHYL ACETATE 17 VINYL ACETATE 17 Vinylbenzene STYRENE MONOMER 17 Vinylcarbinol ALLYL ALCOHOL 17 Vinyl cyanide ACRYLONITRILE 17 vinyl ethanoate VINYL ACETATE 17 VINYL ETHYL ETHER 17 Vinylformic acid ACRYLIC ACID 17 VINYLIDENE CHLORIDE 17 VINYL NEODECANOATE 17 VINYLTOLUENE 17 Vinyltoluene (all isomers) VINYLTOLUENE 17 Vinyl trichloride 1,1,2-TRICHLOROETHANE 17 Vitriol brown oil SULPHURIC ACID 17 WATER 18 Water glass solutions SODIUM SILICATE SOLUTION 17 WAXES 17 White bole KAOLIN SLURRY 18 White caustic solution SODIUM HYDROXIDE SOLUTION 17 WHITE SPIRIT, LOW (15-20%) AROMATIC 17 White tar NAPHTHALENE (MOLTEN) 17 Wine (a) ALCOHOLIC BEVERAGES, N.O.S. 18 Wintergreen oil METHYL SALICYLATE 17 Wood alcohol METHYL ALCOHOL 17 WOOD LIGNIN WITH SODIUM 17

ACETATE/OXALATE

Wood naphtha METHYL ALCOHOL 17 Wood spirit METHYL ALCOHOL 17 XYLENES 17 XYLENES/ETHYLBENZENE (10% OR MORE) 17

MIXTURE

XYLENOL 17 Xylenol (all isomers) XYLENOL 17 2,3-Xylenol (a) XYLENOL 17 2,4-Xylenol (a) XYLENOL 17

164

Bilaga

Index Name Product Name Chapter

2,5-Xylenol (a) XYLENOL 17 2,6-Xylenol (a) XYLENOL 17 3,4-Xylenol (a) XYLENOL 17 3,5-Xylenol (a) XYLENOL 17 Xylols XYLENES 17 ZINC ALKARYL DITHIOPHOSPHATE (C7-C16) 17 ZINC ALKENYL CARBOXAMIDE 17 ZINC ALKYL DITHIOPHOSPHATE (C3-C14) 17 Zinc bromide drilling brine DRILLING BRINES (CONTAINING ZINC SALTS) 17 z-Octadec-9-enamine OLEYLAMINE 17 (Z)-Octadec-9-enoic acid OLEIC ACID 17 Z-Octadec-9-enoic acid OLEIC ACID 17 (Z)-Octadec-9-enylamine OLEYLAMINE 17

165

Bilaga

166