31986R4129

31 . 12.86 Official Journal of the European Communities NoL381 / l

I

(Acts whose publication is obligatory)

COMMISSION REGULATION (EEC) No 4129/86

of 23 December 1986

on the definition of the concept of 'originating products' and methods of administrative cooperation applicable to imports into the Community of products originating in the Occupied Territories

THE COMMISSION OF THE EUROPEAN (b) products obtained in these territories in the manu­ COMMUNITIES , facture of which products other than those referred to in (a) are used, provided that the said products Having regard to the Treaty establishing the European have undergone sufficient working or processing Economic Community, within the meaning of Article 3 .

Having regard to Council Regulation (EEC) No 2 . The provisions of paragraph 1 and of Articles 2 to 3363 / 86 of 27 October 1986 on the tariff arrangements 4 shall not apply to the products in List C in Annex IV. applicable to imports into the Community of products originating in the Occupied Territories (') and in particular Article 3 thereof, Article 2

The following shall be considered as wholly obtained in Whereas, as regards the products referred to in the the Occupied Territories within the meaning of Article abovementioned Regulation, rules should be established 1(a): to define the conditions in which they acquire the character of originating products , the mode of proof and (a) mineral products extracted from its soil or from its the terms as to verification thereof, following the seabed ; procedure laid down in Article 14 of Council Regulation (EEC) No 802 /68 of 27 June 1968 concerning the (b) vegetable products harvested there ; common definition on the concept of the origin of goods (2); (c) live animals born and raised there ;

Whereas the measures provided for in this Regulation (d) products obtained there from live animals ; are in accordance with the opinion of the Committee on Origin, (e) products obtained by hunting or fishing conducted there ;

HAS ADOPTED THIS REGULATION : (f) used articles collected there fit only for the recovery of raw materials ; TITLE 1 (g) waste and scrap resulting from manufacturing Definition of the concept of 'originating products' operations conducted there ;

(h) products produced there exclusively from products Article 1 specified in (a) to (g).

1 . For the purpose of implementing the provisions concerning tariff preferences granted by the Community Article 3 to certain products originating in the Occupied Territories, the following shall be considered as products 1 . For the purposes of implementing the provisions for originating in these territories , provided that these Article 1 (b), the following shall be considered as products have been transported directly, within the sufficient working or processing : meaning of Article 5 , to the Community : (a) working or processing as a result of which the (a) products wholly obtained in these territories ; products obtained receive a classification under a tariff heading other than covering each of the products worked or processed, except, however, O OJ No L 306 , 1 . 11 . 1986 , p. 103 . working the processing specified in List A in Annex O OJ No L 148 , 28 . 6 . 1968 , p. 1 . II, where the special provisions of that list apply ;

No L 381 / 2 Official Journal of the European Communities 31 . 12.86

(b) working or processing specified in List B in Annex (h) slaughter of animals . III . Article 4 The expressions 'section', 'chapter' and 'tariff heading' Where Lists A and B referred to in Article 3 provide that shall mean respectively sections, chapters and tariff products obtained in the Occupied Territories shall be headings in the Customs Cooperation Council considered as originating therein only if the value of the nomenclature for the classification of goods in customs products used does not exceed a given percentage of the tariffs . value of the products obtained, the values to be taken into consideration for determining such percentage shall be ; 2 . When, for a given product obtained, a percentage rule limits in List A and in List B the value of the — on the one hand , materials and parts which can be used, the total value of these materials and parts , whether or not they have as regards products whose importation can be changed tariff heading in the course of the working, proved, their customs value at the time of impor­ processing or assembly within the limits and under the tation ; conditions laid down in each of those two lists, may not as regards products of undetermined origin, the exceed, in relation to the value of the product obtained, earliest ascertainable price paid for such products in the value corresponding either to the common rate, if the the Occupied Territories ; rates are identical in both lists , or to the higher of the two if they are different. — and on the other hand ,

the ex-works price of the products obtained, less 3 . For the purpose of implementing Article 1 (b), the internal taxes refunded or refundable on exportation. following shall in any event be considered as insufficient working or processing to confer the status of originating Article 5 products , irrespective of whether or not there is a change of tariff heading : 1 . The following shall be considered as transported direct from the Occupied Territories to the Community : (a) operations to ensure the preservation of products in (a) products transported without passing through good condition during transport and storage another territory; (ventilation, spreading out, drying, chilling, placing in salt, sulphur dioxide or other aqueous solutions , (b) products transported through the territories other removal of damaged parts , and like operations); than the Occupied Territories, with or without transhipment or temporary warehousing provided (b) simple operations consisting of removal of dust, that transport through those territories is justified for sifting or screening, sorting, classifying, matching geographical reasons or exclusively on account of (including the making-up of sets of articles), transport requirements and that the products have washing, painting, cutting up ; not been delivered for home use there, and have not undergone operations other than unloading, reloading and any operation intended to keep them (c) (i) changes of packing and breaking up and in good condition ; assembly of consignments , (ii) simple placing in bottles , flasks, bags , cases, 2 . Evidence that the conditions specified in paragraph boxes , fixing on cards or boards , etc., and all 1 (b) have been fulfilled shall be supplied to the customs other simple packing operations ; authorities in the Community by the production of :

(a) a through bill of lading drawn up in the Occupied (d) the affixing of marks, labels or other like Territories covering the passage through the country distinguishing signs on products or their packaging ; of transit ; or

(e) simple mixing of products , whether or not of (b) a certification by the customs authorities of the different kinds, where one or more components of country of transit : the mixture do not meet the conditions laid down in — giving an exact description of the products, this Regulation to enable them to be considered as originating products ; — stating the dates of unloading and reloading of the products or of their embarkation or disembarkation, identifying the ships used, (f) simple assembly of parts of products to constitute a complete product ; — certifying the condition under which the products remained in the transit country ; or (g) a combination of two or more operations specified in (a) to (f); (c) failing these, any substantiating documents .

31 . 12.86 Official Journal of the European Communities No L381 / 3

TITLE II Article 7

Arrangements for administrative cooperation 1 . A movement certificate EUR.l shall be issued by the Chambers of Commerce of the Occupied Territories when the goods to which it relates are exported. It shall be made available to the exporter as soon as actual Article 6 exportation has been effected or ensured.

1 . Originating products within the meaning of this 2 . In exceptional circumstances a movement certificate Regulation shall be eligible, on importation into the EUR. 1 may also be issued after exportation of the goods Community, to benefit from the tariff preferences to which it relates if it was not issued at the time of specified in Article 1 on production of a movement certi­ exportation because of errors or involuntary omissions or ficate EUR.l issued by the Chambers of Commerce of special circumstances . In this case, the certificate shall the Occupied Territories provided that they assist the bear a special reference to the conditions under which it Community by allowing the customs authorities of was issued . Member States to verify the authenticity of the document or the accuracy of the information regarding the true 3 . A movement certificate EUR.l shall be issued only origin of the products in question . upon a written request by the exporter. Such application shall be made on a form, a specimen of which is given in Annex V, which shall be completed in accordance with 2 . The Commission shall forward the list of the this Regulation . Chambers of Commerce mentioned in paragraph 1 and the specimens of stamps used by these bodies to the 4 . A movement certificate EUR.l may be issued only Customs authorities of the Member States . where it can serve as the documentary evidence required for the purpose of implementing the provisions of the present regulation. 3 . However, originating products within the meaning of this Regulation which are sent by post (including 5 . Applications for movement certificates must be kept those sent by parcel post) shall, provided that the for at least two years by the Chambers of Commerce of consignments contain only originating products and that the Occupied Territories . their value does not exceed 2 355 ECU (*) per consignment, qualify on entry into the Community for Article 8 the tariff preferences specified in Article 1 on production of a Form EUR.2 , on condition that the assistance 1 . The movement certificate EUR.l shall be issued by specified in the preceding paragraph is forthcoming in the Chambers of Commerce if the goods can be considered originating products within the meaning of respect of the said form . this Regulation .

2 . For the purpose of verifying whether the conditions 4 . Without prejudice to Article 3 (3), where, at the stated in paragraph 1 have been met, the Chambers of request of the person declaring the goods at the customs , Commerce shall have the right to call for any a dismantled or non-assembled article falling within documentary evidence or to carry out any check which Chapter 84 or 85 of the Common Customs Tariff (CCT) they consider appropriate . is imported by instalments on the conditions laid down by the appropriate authorities , it shall be considered to 3 . It shall be the responsibility of the Chambers of be a single article and a certificate of origin Form A may Commerce to ensure that the forms referred to in Article be submitted for the whole article upon importation of 9 are duly completed. In particular, they shall check the first instalment. whether the space reserved for the description of the goods has been completed in such a manner as to exclude all possibility of fraudulent additions . To this 5 . Accessories , spare parts and tools dispatched With a end, the description of the goods must be indicated piece of equipment, machine, apparatus or vehicle which without leaving any blank lines . Where the space is not are part of the normal equipment and included in the completely filled a horizontal line must be drawn below price thereof or are not separately invoiced shall be the last line of the description, the empty space being regarded as one with the piece of equipment, machine, crossed through . apparatus or vehicle in question . 4 . For the purposes of the present Regulation the box 1 1 of the movement certificate EUR. 1 is endorsed by the 6 . Sets in the sense of the General Rule 3 of the CCC competent Chamber of Commerce . The date of issue of nomenclature shall be regarded as originating when all the certificate must be indicated in this box. component articles are originating products . Nevertheless, when a set is composed of originating and Article 9 non-originating articles, the set as a whole shall be regarded as originating provided that the value of the Movement certificates EUR.l shall be made out on the non-originating articles does not exceed 15 % of the form of which a specimen is given in Annex V. This total value of the set. form shall be printed in one or more of the official

No L 381 / 4 Official Journal of the European Communities 31 . 12 . 86

languages of the Community. Certificates shall be made 2 . In other cases of belated presentation, the customs out in one of these languages . If they are handwritten authorities of the Community may accept the certificates they shall be completed in ink and in capital letters . where the goods have been submitted to them before the said final date .

Each certificate shall measure 210 x 297 mm . A tolerance of up to plus 8 or minus 5 mm in the length may be allowed. The paper used must be white writing Article 14 paper, sized, not containing mechanical pulp and weighing not less than 25 g/m\ It shall have a printed The discovery of slight discrepancies between the statements made in the movement certificate EUR.l and green guilloche pattern background making any fal­ those made in the documents submitted to the customs sification by mechanical or chemical means apparent to the eye. office for the purpose of carrying out the formalities for importing the goods shall not ipso facto render the certi­ ficate null and void if it is duly established that the certi­ The certificate shall also bear a serial number, either ficate does correspond to the goods submitted . printed or not, by which it can be identified .

Article 10 Article 15 1 . Under the responsibility of the exporter, he or his It shall always be possible to replace one or more authorized representative shall request the issue of a movement certificates by one or more certificates movement certificate EUR. 1 . provided that this is done at the customs office of the Community where the goods are located . 2 . The exporter or his representative shall submit with his request any appropriate supporting document proving that the goods to be exported are such as to qualify for Article 16 the issue of a movement certificate EUR. 1 .

Form EUR.2, a specimen of which is given in Annex VI, Article 11 shall be completed by the exporter or, under his responsibility, by his authorized representative. It shall be A movement certificate EUR.l must be submitted , within made out in one of the official languages of the five months of the date of issue by the Chambers of Community. If it is handwritten it must be completed in Commerce, to the customs authorities of the importing ink and in capital letters . State where the goods are entered.

Article 12 Form EUR.2 shall measure 210 x 148 mm . A tolerance of up to plus 8 or minus 5 mm in the length may be Movement certificates EUR.l shall be submitted to allowed . The paper used must be white writing paper, customs authorities in the importing State, in accordance sized, not containing mechanical pulp and weighing not with the procedures laid down in Commission Directive less than 64 g/m2 . 82 / 57 /EEC (') laying down certain provisions for implementing Council Directive 79/695 /EEC (2) on the harmonization of procedures for the release of goods for A form EUR.2 shall be completed for each postal free circulation ('). The said authorities may require a consignment. translation of a certificate. They may also require the entry form for release for free circulation to be accompanied by a statement from the importer to the These provisions do not exempt exporters from effect that the products meet the conditions required for complying with any other formalities required by the tariff preferences specified in Article 1 . customs or postal regulations .

Article 13

1 . A movement certificate EUR.l which is submitted Article 17 to the customs authorities of the importing Member 1 . Goods sent as small packages from private persons State after the final date for presentation specified in to private persons or forming part of travellers' personal Article 11 may be accepted for the purpose of applying luggage shall be admitted as originating products preferential treatment, where the failure to submit the without requiring the production of a movement certi­ certificate by the final date set is due to reasons of force ficate EUR.l or the completion of a form EUR.2 , majeure or exceptional circumstances . provided that such goods are not imported by way of trade and have been declared as meeting the conditions required for the application of these provisions, and o OJ No L 28 , 5 . 2 . 1982 , p. 38 . where there is no doubt as to the veracity of such (2) OJ No L 205 , 13 . 8 . 1979, p. 19 . declaration .

31 . 12.86 Official Journal of the European Communities No L 381 / 5

2 . Importations which are occasional and consist — certify that no movement certificate EUR. 1 was solely of goods for the personal use of the recipients or issued at the time of exportation of the goods in travellers or their families shall not be considered as question, and state the reasons . importations by way of trade if it is evident from the nature and quantity of the goods that no commercial 2 . The Chambers of Commerce of the Occupied purpose is in view. Furthermore, the total value of these Territories may issue a movement certificate EUR. 1 goods must not exceed 165 ECU in the case of small retrospectively only after verifying that the information packages or 470 ECU in the case of the contents of supplied in the exporter's application agrees with that in travellers' personal luggage . the corresponding file .

Certificates issued retrospectively must be endorsed with Article 18 one of the following phrases :

1 . Goods sent from the Occupied Territories for — EXPEDIDO A POSTERIORI exhibition in another country and sold after the exhibition for importation into the Community shall — UDSTEDT EFTERFØLGENDE benefit on importation from the tariff preferences specified in Article 1 on condition that the goods meet — NACHTRÄGLICH AUSGESTELLT the requirements of this Regulation entitling them to be — ΕΚΔΟΘΕΝ ΕΚ ΤΩΝ ΥΣΤΕΡΩΝ recognized as originating and provided that it is shown to the satisfaction of the customs authorities that : — ISSUED RETROSPECTIVELY

(a) an exporter has consigned these goods from the — DÉLIVRÉ À POSTERIORI Occupied Territories to the country in which the exhibition is held and has exhibited them there ; — RILASCIATO A POSTERIORI

— AFGEGEVEN A POSTERIORI (b) the goods have been sold or otherwise disposed of by that exporter to a consignee in the Community; — EMITIDO A POSTERIORI

(b) the goods have been consigned during the exhibition Article 20 or immediately thereafter to the Community in the In the event of the theft, loss or destruction of a state in which they were sent for exhibition ; movement certificate EUR. 1 , the exporter may apply to the Chambers of Commerce which issued it for a (d) the goods have not, since they were consigned for duplicate made out on the basis of the export documents exhibition, been used for any purpose other than in their possession . The duplicate issued in this way must demonstration at the exhibition . be endorsed with one of the following words :

— DUPLICADO 2 . A movement certificate EUR.l must be submitted to the customs authorities in the normal manner. The — DUPLIKAT name and address of the exhibition must be indicated — DUPLIKAT thereon . Where necessary, additional documentary evidence of the nature of the goods and the conditions — ΑΝΤΙΓΡΑΦΟ under which they have been exhibited may be required .

— DUPLICATE 3 . Paragraph 1 shall apply to any trade, industrial, — DUPLICATA agricultural or crafts exhibition, fair or similar public show or display which is not organized for private — DUPLICATO purposes in shops or business premises with a view to the sale of foreign goods , and during which the goods — DUPLICAAT remain under customs control . — SEGUNDA VIA

Article 19 Article 21 1 . When a certificate is issued in accordance with 1 . Subsequent verification of movement certificates Article 7 (2), after the goods to which it relates have EUR. 1 and of forms EUR.2 shall be carried out at actually been exported, the exporter must in the random or whenever the customs authorities of the application referred to in Article 7 (3) : importing Member State have reasonable doubt as to the authenticity of the document or the accuracy of the — indicate the place and date of consignment of the information regarding the true origin of the goods in goods to which the certificate relates, question .

No L 381 / 6 Official Journal of the European Communities 31 . 12.86

2 . For the purpose of implementing paragraph 1 , the 2 . If in cases of reasonable doubt there is no reply in customs authorities of the importing Member State shall the six months set out in the paragraph above or if the return the movement certificate EUR.l or the form reply does not contain sufficient information to EUR.2 , or a photocopy thereof, to the Chambers of determine the authenticity of the document in question Commerce giving, where appropriate, the reasons of or the real origin of the products, a second communi­ form or substance for an inquiry. The invoice, if it has cation shall be sent to the Chambers of Commerce been submitted, or a copy thereof shall be attached to concerned . If after the second communication, the the form EUR.2 and the customs authorities shall results of the verification are not communicated as soon forward any information that has been obtained as possible or at the latest within four months to the suggesting that the particulars given on the said certi­ requesting authorities , or if these results do not permit ficate or the said form are inaccurate . the determination of the authenticity of the document in question or the real origin of the products, the If the customs authorities of the importing Member State requesting authorities shall refuse, except in the case of decide to suspend execution of the preferential force majeure or in exceptional circumstances, any benefit treatment, pending the results of the verification, they from the preferential treatment. shall offer to release the goods to the importer subject to 3 . For the purpose of subsequent verification of certi­ any precautionary measures judged necessary. ficates of origin Form A, copies of the certificates as well as any export documents referring to them shall be kept for at least two years by the appropriate Chamber of Article 22 Commerce .

1 . When an application for subsequent verification has Article 23 been made in accordance with the provisions of Article The endorsements referred to in Articles 19 and 20 shall 21 , such verification shall be carried out, and its results be inserted in the ' Remarks' box of the certificate . communicated to the customs authorities in the Community within a maximum of six months . The Article 24 results must be such as to establish whether the movement certificate EUR.l or the Form EUR.2 in This Regulation shall enter into force on the third day following its publication in the Official Journal of the question applies to the products actually exported and whether these products were in fact eligible to benefit European Communities. from the tariff preferences specified in Article 1 . It shall apply from 16 November 1986 .

This Regulation shall be binding in its entirety and directly applicable in all Member States .

Done at Brussels , 23 December 1986 .

For the Commission

COCKFIELD

Vice-President

31 . 12.86 Official Journal of the European Communities No L 381 / 7

ANNEX I

EXPLANATORY NOTES

Note 1

The term 'Occupied Territories' shall cover the west bank of the river Jordan and the Gaza strip both occupied by Israel .

Note 2 — Article 1

In order to determine whether goods originate in the Occupied Territories , it shall not be necessary to establish whether the electrical power, fuel, plant and equipment and machines and tools used to obtain finished goods or whether any products used in the course of production which do not enter ^nd which were not intended to enter into the final composition of the goods originate in third countries or not.

Note 3 — Article 1

Where a percentage rule is applied in determining originating status of a product obtained in the Occupied Territories, the value added by the working or processing referred to in Article 1 shall correspond to the ex-works price of the product obtained less the . customs value of third products imported into these territories .

Note 4 — Article 3(1 ) and ( 2) and Article 4

The percentage rule constitutes , where the product obtained appears in List A, a criterion additional to that of change of heading for any non-originating product used .

Note 5 — Article 1

Packaging shall be deemed to form a whole with the goods contained therein . This provision , however, shall not apply to packaging which is not of the normal type for the article packed and which has intrinsic utilization value and is of a durable nature , apart from its function as packaging .

Note 6 — Article 4

' Ex-works price' shall mean the price paid to the manufacturer in whose undertaking the last working or processing is carried out, provided the price includes the value of all the products used in manufacture.

' Customs value' shall be understood as meaning the customs value as determined in accordance with the Agreement on implementation of Article VII of the General Agreement of Tariffs and Trade done at Geneva on 12 April 1979 .

Notes to Lists A and B

1 . The lists contain some products which do not benefit from tariff preferences but which may be used in the manufacture of products which do benefit.

2 . The description of the products in column 2 in the lists corresponds to that of the same heading number of the Customs Cooperation Council nomenclature .

3 . When a Customs Cooperation Council nomenclature heading number in column 1 of the lists is prefixed by 'ex', the corresponding rule applies only to the products stated in column 2 .

No L 381 / 8 Official Journal of the European Communities 31 . 12 . 86

ANNEX II

LIST A

List of working or processing operations which result in a change of tariff heading without conferring the status of originating products on the products undergoing such operations, or conferring this status only subject to certain conditions

Products obtained Working or processing that Working or processing that does confers the status of CCT not confer the status of originating products when the heading Description originating products No following conditions are met

02.06 Meat and edible meat offals (except Salting, placing in brine, drying or poultry liver), salted, in brine, dried smoking of meat and edible meat or smoked and edible meat offals of heading Nos 02.01 and 02.04

04.02 Milk and cream, preserved, con­ Preserving, concentrating, or centrated or sweetened adding sugar to milk or cream of heading No 04.01

04.03 Butter Manufacture from milk or cream

04.04 Cheese and curd Manufacture from products of heading Nos 04.01 , 04.03

07.02 Vegetables (whether or not Freezing of vegetables cooked), preserved by freezing

07.03 Vegetables provisionally preserved Placing in brine or in other in brine, in sulphur water or in solutions of vegetables of heading other preservative solutions , but not No 07.01 specially prepared for immediate consumption

07.04 Dried, dehydrated or evaporated Drying, dehydration, evaporation, vegetables, whole, cut, sliced, cutting, grinding, powdering of broken or in powder, but not vegetables of heading Nos 07.01 to further prepared 07.03

08.10 Fruit (whether or not cooked), Freezing of fruit preserved by freezing, not containing added sugar

08.11 Fruit provisionally preserved (for Placing in brine or in other example, by sulphur dioxide gas, in solutions of fruit of heading Nos brine , in sulphur water or in other 08.01 to 08.09 preservative solutions), but unsuit­ able in that state for immediate consumption

31 . 12 . 86 Official Journal of the European Communities No L 381 / 9

Products obtained Working or processing that Working or processing that does confers the status of CCT not confer the status of originating products when the heading Description originating products No following conditions are met

08.12 Fruit, dried, other than that falling Drying of fruit within heading Nos 08.01 , 08.02 , 08.03 , 08.04 or 08.05

11.01 Cereal flours Manufacture from cereals

11.02 Cereal groats and cereal meal ; other Manufacture from cereals worked cereal grains (for example , rolled, flaked, polished, pearled or kibbled, but not further prepared), except rice falling within heading No 10.06 ; germ of cereals , whole , rolled, flaked or ground

11.04 Flour of the dried leguminous Manufacture from dried leguminous vegetables falling within heading vegetables of heading No 07.05 , No 07.05 or of the fruits falling products of heading No 07.06 or of within any heading in Chapter 8 ; fruit of Chapter 8 flour and meal of sago and of roots and tubers falling within heading No 07.06

11.05 Flour, meal and flakes of potato Manufacture from potatoes

11.07 Malt, roasted or not Manufacture from cereals

11.08 Starches ; inulin Manufacture from cereals of Chapter 10 , or from potatoes or other products of Chapter 7

11.09 Wheat gluten , whether or not dried Manufacture from wheat or wheat flours

15.01 Lard , other pig fat and poultry fat, Manufacture from products of rendered or solvent-extracted heading No 02.05

15.02 Fats of bovine cattle, sheep or Manufacture from products of goats , unrendered ; rendered or heading Nos 02.01 and 02.06 solvent-extracted fats (including 'premier jus') obtained from those unrendered fats

15.04 Fats and oils , of fish and marine Manufacture from fish or marine mammals , whether or not refined mammals

15.06 Other animal oils and fats Manufacture from products of (including neat's-foot oil and fats Chapter 2 from bones or waste)

No L 381 / 10 Official Journal of the European Communities 31 . 12 . 86

Products obtained Working or processing that does Working or processing that CCT not confer the status of confers the status of heading Description originating products when the originating products No following conditions are met

ex 15.07 Fixed vegetable oils , fluid or solid , Manufacture from products of crude, refined or purified, but not Chapters 7 and 12 including chinawood oil, myrtle­ wax, japan wax or oil of tung nuts , oleococca seeds or oiticia seeds ; also not including oils of a kind used in machinery or mechanical appliances or for industrial purposes other than the manufacture of edible products

16.01 Sausages and the like , of meat, Manufacture from products of meat offal or animal blood Chapter 2

16.02 Other prepared or preserved meat Manufacture from products of or meat offal Chapter 2

ex 17.01 Beet sugar and cane sugar, in solid Manufacture from other products form , flavoured or coloured of Chapter 17 the value of which exceeds 30 % of the value of the finished product

ex 17.02 Other sugars , in solid form , Manufacture from other products flavoured or coloured of Chapter 17 the value of which exceeds 30 % of the value of the finished product

ex 17.02 Other sugars , in solid form , not Manufacture from any product flavoured or coloured ; sugar syrups, not flavoured or coloured ; artificial honey, whether or not mixed with natural honey ; caramel

ex 17.03 Molasses , flavoured or coloured Manufacture from other products of Chapter 17 the value of which exceeds 30 % of the value of the finished product

17.04 Sugar confectionery, not containing Manufacture from other products cocoa of Chapter 17 the value of which exceeds 30 % of the value of the finished product

18.06 Chocolate and other food Manufacture from products of preparations containing cocoa Chapter 17 the value of which exceeds 30 % of the value of the finished product

ex 19.02 Malt extract Manufacture from products of heading No 1 1.07

31 - 12 . 86 Official Journal of the European Communities No L 381 / 11

Products obtained Working or processing that Working or processing that does confers the status of CCT not confer the status of heading Description originating products originating products when the No following conditions are met

ex 19.02 Preparations of flour, meal, starch Manufacture from cereals and de­ or malt extract, of a kind used as rivatives thereof, meat and milk, or infant food or for dietetic or culi­ in which the value of products of nary purposes , containing less than Chapter 17 used exceeds 30 % of 50 % by weight of cocoa the value of the finished product

19.03 Macaroni, spaghetti and similar Manufacture from durum wheat products

19.04 Tapioca and sago ; tapioca and sago Manufacture from potato starch substitutes obtained from potato or other starches

19.05 Prepared foods obtained by the Manufacture from any product (') swelling or roasting of cereals or or in which the value of the prod­ cereal products (puffed rice, ucts of Chapter 17 used exceeds cornflakes and similar products) 30 % of the value of the finished products

19.07 Bread , ships' biscuits and other Manufacture from products of ordinary bakers' wares, not con­ Chapter 11 taining added sugar, honey, eggs , fats , cheese or fruit ; communion wafers , cachets of a kind suitable for pharmaceutical use, sealing wa­ fers, rice paper and similar products

19.08 Pastry, biscuits , cakes and other fine Manufacture from products of bakers' wares , whether or not Chapter 11 containing cocoa in any proportion

20.01 Vegetables and fruit, prepared or Preserving vegetables, fresh or preserved by vinegar or acetic acid frozen or preserved temporarily or with or without sugar, whether or preserved in vinegar not containing salt, spices or mustard

20.02 Vegetables prepared or preserved Preserving vegetables, fresh or otherwise than by vinegar or acetic frozen acid

20.03 Fruit preserved by freezing, Manufacture from products of containing added sugar Chapter 17 of which the value exceeds 30 % of the value of the finished product

20.04 Fruit, fruit-peel and parts of plants , Manufacture from products of preserved by sugar (drained , glace Chapter 17 of which the value or crystallized) exceeds 30 % of the value of the finished product

ex 20.05 Jams , fruit jellies , marmalades , fruit Manufacture from products of purées and fruit pastes, being Chapter 17 of which the value cooked preparations , containing exceeds 30 % of the value of the added sugar finished product

20.06 Fruit otherwise prepared or preserved, whether or not containing added sugar or spirit :

(') This rule does not apply where the use of maize of the 'Zea indurata' type or durum wheat it concerned .

No L 381 / 12 Official Journal of the European Communities 31 . 12 . 86

Products obtained Working or processing that Working or processing of that does confers the status of CCT not confer the status of originating products when the heading Description originating products No following conditions are met

20.06 A. Nuts Manufacture, without added sugar or (cont 'd) spirit, in which the value of the constituent originating products of heading Nos 08.01 , 08.05 and 12.01 , represents at least 60 % of the value of the finished product

B. Other fruits Manufacture from products of Chapter 17 of which the value exceeds 30 % of the value of the finished product

ex 20.07 Fruit juices (including grape must), Manufacture from products of whether or not containing added Chapter 17 of which the value sugar, but unfermented and not exceeds 30 % of the value of the containing spirit finished product

ex 21.02 Roasted chicory and extracts Manufacture from chicory roots , thereof fresh or dried

21.05 Soups and broths in liquid , solid or Manufacture from products of powder form ; homogenized food heading No 20.02 preparations

ex 21.07 Sugar syrups , flavoured or coloured Manufacture from products of Chapter 17 of which the value exceeds 30 % of the value of the finished product

22.02 Lemonade , flavoured spa waters Manufacture from fruit juices (') or and flavoured aerated waters , and in which the value of products of other non-alcoholic beverages , not Chapter 17 used exceeds 30 % of including fruit and vegetable juices the value of the finished product falling within heading No 20.07

22.06 Vermouths , and other wines of Manufacture from products of fresh grapes flavoured with heading No 08.04 , 20.07, 22.04 or aromatic extracts 22.05

22.08 Ethyl alcohol or neutral spirits , Manufacture from products of undenatured, of a strength of 80° heading No 08.04 , 20.07, 22.04 or or higher ; denatured spirits 22.05 (including ethyl alcohol and neutral spirits) or any strength

22.09 Spirits (other than those of heading Manufacture from products of No 2.2.08 ); liqueurs and other heading No 08.04 , 20.07 , 22.04 or spirituous beverages ; compound 22.05 alcoholic preparations (known as 'concentrated extracts') for the manufacture of beverages

22.10 Vinegar and substitutes for vinegar Manufacture from products of heading No 08.04 , 20.07 , 22.04 or 22.05

(') This rule does not apply where fruit juices of pineapple, lime and grapefruit are concerned .

31 . 12 . 86 Official Journal of the European Communities No L 381 / 13

Products obtained Working or processing that Working or processing that does confers the status of CCT not confer the status of heading originating products when the Description originating products No following conditions are met

ex 23.03 Residues from the manufacture Manufacture from maize or maize of maize starch (excluding flour concentrated steeping liquors), of a protein content, calculated on the dry product, exceeding 40 % by weight

23.04 Oil-cake and other residues (except Manufacture from various products dregs) resulting from the extraction of vegetable oils

23.07 Sweetened forage ; other Manufacture from cereals and preparations of a kind used in derived products, meat, milk, sugar animal feeding and molasses

ex 24.02 Cigarettes, cigars , smoking tobacco Manufacture from products of heading No 24.01 of which at least 70 % by quantity are originating products

ex 28.38 Aluminium sulphate Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product

30.03 Medicaments (including veterinary Manufacture in which the value of the medicaments) products used does not exceed 50 % of the value of the finished product

31.05 Other fertilizers ; goods of the Manufacture in which the value of the present Chapter in tablets, lozenges products used does not exceed 50 % and similar prepared forms or in of the value of the finished product packings of a gross weight not exceeding 10 kg

32.06 Colour lakes Manufacture from materials of heading No 32.04 or 32.05 (') . I

32.07 Other colouring matter ; inorganic Mixing of oxides or salts of Chapter products of a kind used as 28 with extenders such as barium luminophores sulphate , chalk barium carbonate and satin white (')

ex 33.06 Aqueous distillates and aqueous Manufacture from essential oils solutions of essential oils , including (terpeneless or not), concretes , such products suitable for medicinal absolutes or resinoids (') uses l

35.05 Dextrins and dextrin glues ; soluble Manufacture from maize or potatoes or roasted starches ; starch glues

ex 35.07 Prepared enzymes not elsewhere Manufacture in which the value of the specified or included products used does not exceed 50 % of the value of the finished product

37.01 Photographic plates and film in the Manufacture from products of flat, sensitized, unexposed, of any heading No 37.02 (') material other than paper, paper­ board or cloth

(') These provisions do not apply where the products are obtained from products which have acquired the status of originating products in accordance with the conditions laid down in List B.

No L 381 / 14 Official Journal of the European Communities 31 . 12 . 86

Products obtained Working or processing that Working or processing that does confers tne status of CCT not confer the status of originating products when the heading Description originating products following conditions are met No

37.02 Film in rolls, sensitized, unexposed, Manufacture from products of perforated or not heading No 37.01 (')

37.04 Sensitized plates and film , exposed Manufacture from products of but not developed, negative or heading No 37.01 or 37.02 (') positive

38.11 Disinfectants , insecticides, fungi­ Manufacture in which the value of the cides, rat poisons , herbicides , anti­ products used does not exceed 50 % sprouting products, plant growth of the value of the finished product regulators and similar products , put up in forms or packings for sale by retail or as preparations or as articles (for example, sulphur­ treated bands , wicks and candles, fly-papers)

38.12 Prepared glazings , prepared dress­ Manufacture in which the value of the ings and prepared mordants, of a products used does not exceed 50 % kind used in the textile, paper, of the value of the finished product leather or like industries

38.13 Pickling preparations for metal sur­ Manufacture in which the value of the faces ; fluxes and other auxiliary products used does not exceed 50 % preparations for soldering, brazing of the value of the finished product or welding ; soldering, brazing or welding powders and pastes con­ sisting of metal and other materials ; preparations of a kind used as cores or coatings for welding rods and electrodes

ex 38.14 Anti-knock preparations , oxidation Manufacture in which the value of the inhibitors , gum inhibitors, viscosity products used does not exceed 50 % improvers , anti-corrosive prep­ of the value of the finished product arations and similar prepared ad­ ditives for mineral oils , excluding prepared additives for lubricants

38.15 Prepared rubber accelerators Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product

38.17 Preparations and charges for fire­ Manufacture in which the value of the extinguishers ; charged fire-ex­ , products used does not exceed 50 % tinguishing grenades of the value of the finished product

38.18 Composite solvents and thinners for Manufacture in which the value of the varnishes and similar products products used does not exceed 50 % of the value of the finished product

(l) These provisions do not apply where the products are obtained from products which have acquired the status of originating products in accordance with the conditions laid down in List B.

31 . 12 . 86 Official Journal of the European Communities No L 381 / 15

Products obtained Working or processing that does Working or processing that CCT not confer the status of confers tne status of heading Description originating products originating products when the No following conditions are met

ex 38.19 Chemical products and preparations Manufacture in which the value of the of the chemical or allied industries products used does not exceed 50 % (including those consisting of of the value of the finished product mixtures of natural products), not elsewhere specified or included ; residual products of the chemical or allied industries not elsewhere specified or included, excluding :

— Fusel oil and dippel's oil

— Naphthenic acids and their water-insoluble salts ; esters of naphthenic acids

— Sulphonaphthenic acids and their water- insoluble salts ; esters of sulphonaphthenic acids

— Petroleum sulphonates , ex­ cluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines , thiophen­ ated sulphonic acids of oils obtained from bituminous minerals, and their salts

— Mixed alkylbenzenes and mixed alkylnaphthalenes

— Ion exchangers

— Catalysts

— Getters for vacuum tubes

— Refractory cements or mortars and similar compositions

— Alkaline iron oxide for the purification of gas

— Carbon (excluding that in artificial graphite of heading No 38.01 ) in metal-graphite or other compounds, in the form of small plates, bars or other semi­ manufactures

— Sorbitol other than that of heading No 29.04

— Ammoniacal gas liquors and spent oxide produced in coal gas purification

ex 39.02 Polymerization products Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product

No L 381 / 16 Official Journal of the European Communities 31 . 12 . 86

Products obtained Working or processing that Working or processing that does confers the status of CCT not confer the status of originating products when the heading Description originating products following conditions are met No

ex 39.07 Articles of materials of the kinds Manufacture in which the value of the described in headings Nos 39.01 to products used does not exceed 50 % 39.06 with the exception of fans and of the value of the finished product hand screens , non-mechanical ; frames and handles therefor and parts of such frames and handles , and corset busks and similar supports for articles of apparel or clothing accessories

40.05 Plates , sheets and strip, of unvul­ Manufacture in which the value of the canized natural or synthetic rubber, products used, except that of natural other than smoked sheets and crepe rubber, does not exceed 50 % of the sheets of heading No 40.01 or value of the finished product 40.02 ; granules of unvulcanized natural or synthetic rubber compounded ready for vulcan­ ization ; unvulcanized natural or synthetic rubber, compounded before or after coagulation either with carbon black (with or without the addition of mineral oil), or with silica (with or without the addition of mineral oil), in any form, of a kind known as masterbatch

41.08 Patent leather and imitation patent Varnishing or metallizing of leather of leather ; metallized leather headings Nos 41.02 to 41.06 (other than skin leather of crossed Indian sheep and Indian goat or kid , not further prepared than vegetable tanned, or if otherwise prepared obviously unsuitable for immediate use in the manufacture of leather articles) in which the value of the skin leather used does not exceed 50 % of the value of the finished product

43.03 Articles of furskin Making up from furskin in plates , crosses and similar forms (heading No ex 43.02) (')

ex 44.21 Complete wooden packing cases , Manufacture from boards not cut to boxes , crates , drums and similar size packings excepting those made of fibreboard

ex 44.28 Match splints ; wooden pegs or pins Manufacture from drawn wood for footwear

45.03 Articles of natural cork Manufacture from products of heading No 45.01

ex 48.07 Paper and paperboard, ruled, lined, Manufacture from paper pulp or squared, but not otherwise printed , in rolls or sheets

(l) These provisions do not apply where the products are obtained from products which have acquired the status of originating products in accordance with the conditions laid down in List B.

31 . 12 . 86 No L 381 / 17 Official Journal of the European Communities

Products obtained Working or processing that . Working or processing that does confers the status of CCT not confer the status of heading originating products when the Description originating products No following conditions are met

48.14 Writing blocks , envelopes , letter Manufacture in which the value of the cards , plain postcards , corres­ products used does not exceed 50 % pondence cards ; boxes , pouches , of the value of the finished products wallets and writing compendiums , of paper or paperboard , containing only an assortment of paper stat­ ionery

48.15 Other paper and paperboard , cut to Manufacture from paper pulp size or shape

ex 48.16 Boxes, bags and other packing Manufacture in which the value of the containers , of paper or paperboard products used does not exceed 50 % of the value of the finished product

49.09 Picture postcards , Christmas and Manufacture from products of other picture greeting cards , printed heading No 49.1 1 by any process , with or without trimmings

49.10 Calendars of any kind, of paper Manufacture from products of or paperboard, including calendar heading No 49.1 1 blocks

50.04 (») Silk yarn, other than yarn of noil or Manufacture from products other than other waste silk, not put up for those of heading No 50.04 retail sale

50.05 C ) Yarn spun from noil or other waste Manufacture from products of silk, not put up for retail sale heading No 50.03

50.07 (') Silk yarn and yarn spun from noil Manufacture from products of or other waste silk, put up for retail headings Nos 50.01 to 50.03 sale

;x 50.07 (') Imitation catgut of silk Manufacture from products of heading No 50.01 or of heading No 50.03 neither carded nor combed

50.09 O Woven fabrics of silk, of noil or of Manufacture from products of other waste silk heading No 50.02 or 50.03

51.01 O Yarn of man-made fibres (conti­ Manufacture from chemical products nuous), not put up for retail sale or textile pulp

(') For yarn composed of two or more textile materials, the conditions shown in this list must also be met in respect of each of the headings under which yarns of the other textile materials of which the mixed yarn is composed would be classified. This rule, however, does not apply to any one or more mixed textile materials whose weight does not exceed 10 % of the total weight of textile materials incorporated . (2) For fabrics composed of two or more textile materials, the conditions shown in this list must also be met in respect of each of the headings under which fabric of the other textile materials of which the mixed fabric is composed would be classified. This rule, however, does not apply to any one or more mixed textile materials whose weight does not exceed 10 % of the total weight of textile materials incorporated. This percentage shall be increased : — to 20 °/o where the material in question is yarn made of polyurethane segmented with flexible segments of polyether, whether or not gimped, falling within headings Nos ex 51.01 and ex 58.07 , — to 30 % where the material in question is yarn of a width not exceeding 5 mm formed of a core consisting either of a thin strip of aluminium or of a film of artificial plastic material whether or not covered with aluminium powder, this core having been inserted and glued by means of a transparent or coloured glue between two films of artificial plastic material .

No L 381 / 18 Official Journal of the European Communities 31 . 12 . 86

Products obtained Working or processing that Working or processing that does confers the status of CCT not confer the status of originating products when the heading Description originating products No following conditions are met

51.02 (') Monofil , strip (artificial straw and Manufacture from chemical products the like) and imitation catgut, of or textile pulp man-made fibre materials

51.03 0) Yarn of man-made fibres (continu­ Manufacture from chemical products ous), put up for retail sale or textile pulp

51.04 (2) Woven fabrics of man-made fibres Manufacture from chemical products (continuous), including woven or textile pulp fabrics of monofil or strip of heading No 51.01 or 51.02

52.01 0) Metallized yarn, being textile yarn Manufacture from chemical products , spun with metal or covered with from textile pulp or from natural metal by any process textile fibres, or their waste, neither carded nor combed

52.02 (2) Woven fabrics of metal thread or of Manufacture from chemical products, metallized yarn, of a kind used in from textile pulp or from natural articles of apparel , as furnishing textile fibres, discontinuous man-made fabrics or the like fibres or their waste

53.06 C) Yarn of carded sheep's or lambs' Manufacture from products of wool (woollen yarn), not put up for heading No 53.01 or 53.03 retail sale

53.07 O Yarn of combed sheep's or lambs' Manufacture from products of wool (worsted yarn), not put up for heading No 53.01 or 53.03 retail sale

53.08 O Yarn of fine animal hair (carded or Manufacture from raw fine animal combed), not put up for retail sale hair of heading No 53.02

53.09 O Yarn of horsehair or of other coarse Manufacture from raw coarse animal animal hair, not put up for retail hair of heading No 53.02 or from raw sale horsehair of heading No 05.03

53.10 (') Yarn of sheep's or lambs' wool, of Manufacture from materials of horsehair or of other animal hair heading Nos 05.03 and 53.01 to 53.04 (fine or coarse), put up for retail sale

(') For yarn composed of two or more textile materials, the conditions shown in the list must also be met in respect of each of the headings under which yarns of the other textile materials of which the mixed yarn is composed would be classified. This rule, however, does not apply to any one or more mixed textile materials whose weight does not exceed 10 °/o of the total weight of textile materials incorporated . (2) For fabrics composed of two or more textile materials, the conditions shown in this list must also be met in respect of each of the headings under which fabric of the other textile materials of which the mixed fabric is composed would be classified. This rule, however, does not apply to any one or more mixed textile materials whose weight does not exceed 10 °/o of the total weight of textile materials incorporated . This percentage shall be increased : — to 20 % where the material in question is yarn made of polyurethane segmented with flexible segments of polyether, whether or not gimped, falling within headings Nos ex 51.01 and ex 58.07, — to 30 % where the material in question is yarn of a width not exceeding 5 mm formed of a core consisting either of a thin strip of aluminium or of a film of artificial plastic material whether or not covered with aluminium powder, this core having been inserted and glued by means of a transparent or coloured glue between two films of artificial plastic material.

31 . 12 . 86 Official Journal of the European Communities No L 381 / 19

Products obtained Working or processing that does Working or processing that CCT confers the status of not confer the status of heading Description originating products originating products when the No following conditions are met

53.11 O Woven fabrics of sheep's or lambs' Manufacture from materials of wool or of fine animal hair headings Nos 53.01 to 53.05

53.12 O Woven fabrics of horsehair or of Manufacture from products of other coarse animal hair headings Nos 53.02 to 53.05 or from horsehair of heading No 05.03

54.03 (2) Flax or ramie yarn, not put up for Manufacture either from products of retail sale heading No 54.01 neither carded nor combed or from products of heading No 54.02

54.04 O Flax or ramie yarn, put up for retail Manufacture from materials of sale heading No 54.01 or 54.02

54.05 C) Woven fabrics of flax or of ramie Manufacture from materials of heading No 54.01 or 54.02

55.05 (2) Cotton yarn, not put up for retail Manufacture from materials of sale heading No 55.01 or 55.03

55.06 (2) Cotton yarn, put up for retail sale Manufacture from materials of heading No 55.01 or 55.03

55.07 (') Cotton gauze Manufacture from materials of heading No 55.01 , 55.03 or 55.04

55.08 (') Terry towelling and similar terry Manufacture from materials of fabrics, of cotton heading No 55.01 , 55.03 or 55.04

55.09 (') Other woven fabrics of cotton Manufacture from materials of heading No 55.01 , 55.03 or 55.04

56.01 Man-made fibres (discontinuous), Manufacture from chemical products not carded, combed or otherwise or textile pulp prepared for spinning

56.02 Continuous filament tow for the Manufacture from chemical products manufacture of man-made fibres or textile pulp (discontinuous)

56.03 Waste (including yarn waste and Manufacture from chemical products pulled or garnetted rags) of man­ or textile pulp made fibres (continuous or dis­ continuous), not carded , combed or otherwise prepared for spinning

(') For fabrics composed of two or more textile materials, the conditions shown in this list must also be met in respect of each of the headings under which fabric of the other textile materials of which the mixed fabric is composed would be classified. This rule, however, does not apply to any one or more mixed textile materials whose weight does not exceed 10 % of the total weight of textile materials incorporated. This percentage shall be increased : — to 20 % where the material in question is yarn made of polyurethane segmented with flexible segments of polyether, whether or not gimped, falling within headings Nos ex 51.01 and ex 58.07, — to 30 °/o where the material in question is yarn of a width not exceeding 5 mm formed of a core consisting either of a thin strip of aluminium or of a film of artificial plastic material whether or not covered with aluminium powder, this core having been inserted and glued by means of a transparent or coloured glue between two films of artificial plastic material . (2) For yarn composed of two or more textile materials, the conditions shown in the list must also be met in respect of each of the headings under which yarns of the other textile materials of which the mixed yarn is composed would be classified. This rule, however, does not apply to any one or more mixed textile materials whose weight does not exceed 10 % of the total weight of textile materials incorporated.

No L 381 / 20 Official Journal of the European Communities 31 . 12 . 86

Products obtained Working or processing that Working or processing that does confers the status of CCT not confer the status of originating products when the heading Description originating products following conditions are met No

56.04 Man-made fibres (discontinuous or Manufacture from chemical products waste), carded , combed or other­ or textile pulp wise prepared for spinning

56.05 (') Yarn of man-made fibres (discon­ Manufacture from chemical products tinuous or waste), not put up for or textile pulp retail sale

56.06 (') Yarn of man-made fibres (discon­ Manufacture from chemical products tinuous or waste), put up for retail or textile pulp sale

56.07 O Woven fabrics of man-made fibres Manufacture from products of (discontinuous or waste) headings Nos 56.01 to 56.03

57.06 O Yarn of jute or of other textile Manufacture from raw jute or from based fibres of heading No 57.03 other raw textile bast fibres of heading No 57.03

ex 57.07 O Yarn of true hemp Manufacture from true hemp, raw

ex 57.07 O Yarn of other vegetable textile Manufacture from raw vegetable fibres , excluding yarn of true hemp textile fibres of heading Nos 57.02 to 57.04

ex 57.07 Paper yarn Manufacture from products of Chap­ ter 47 , from chemical products , textile pulp or from natural textile fibres, discontinuous man-made fibres or their waste , neither carded nor combed

57.10 O Woven fabrics of jute or of other Manufacture from raw jute or from textile bast fabrics of heading No other raw textile bast fibres of heading 57.03 No 57.03

Manufacture from materials of ex 57.11 O Woven fabrics of other vegetable textile fibres heading No 57.01 , 57.02 , 57.04 or from coir yarn of heading No 57.07

(') For yarn composed of two or more textile materials, the conditions shown in the list must also be met in respect of each of the headings under which yarns of the other textile materials of which the mixed yarn is composed would be classified. This rule, however, does not apply to any one or more mixed textile materials whose weight does not exceed 10 % of the total weight of textile materials incorporated . (2) For fabrics composed of two or more textile materials, the conditions shown in this list must also be met in respect of each of the headings under which fabric of the other textile materials of which the mixed fabric is composed would be classified . This rule, however, does not apply to any one or more mixed textile materials whose weight does not exceed 10 % of the total weight of textile materials incorporated. This percentage shall be increased : — to 20 % where the material in question is yarn made of polyurethane segmented with flexible segments of polyether, whether or not gimped, falling within headings Nos ex 51.01 and ex 58.07, — to 30 % where the material in question is yarn of a width not exceeding 5 mm formed of a core consisting either of a thin strip of aluminium or of a film of artificial plastic material whether or not covered with aluminium powder, this core having been inserted and glued by means of a transparent or coloured glue between two films of artificial plastic material .

31 . 12 . 86 Official Journal of the European Communities No L 381 / 21

Products obtained Working or processing that Working or processing that does confers the status of CCT not confer the status of originating products when the heading Description originating products following conditions are met No

ex 57.11 Woven fabrics of paper yarn Manufacture from paper, from chemical products , textile pulp or from natural textile fibres , discon­ tinuous man-made fibres or their waste

Manufacture from materials of 58.01 0) Carpets , carpeting and rugs, knotted (made up or not) headings Nos 50.01 to 50.03 , 51.01 , 53.01 to 53.05 , 54.01 , 55.01 to 55.04 , 56.01 to 56.03 or 57.01 to 57.04

Manufacture from materials of 58.02 0) Other carpets , carpeting, rugs , mats and matting, and 'Kelem', ' Schu­ headings Nos 50.01 to 50.03 , 51.01 , macks ' and ' Karamanie' rugs and 53.01 to 53.05 , 54.01 , 55.01 to 55.04 , the like (made up or not) 56.01 to 56.03 , 57.01 to 57.04 or from coir yarn of heading No 57.07

Manufacture from materials of 58.04 O Woven pile fabrics and chenille fabrics (other than terry towelling headings Nos 50.01 to 50.03 , 53.01 to or similar terry fabrics of cotton 53.05 , 54.01 , 55.01 to 55.04 , 56.01 to falling within heading No 55.08 and 56.03 , 57.01 to 57.04 or from chemical fabrics falling within heading No products or textile pulp 58.05 )

Narrow woven fabrics , and narrow Manufacture from materials of 58,05 (') fabrics (bolduc) consisting of warp, headings Nos 50.01 to 50.03 , 53.01 to without weft assembled by means 53.05 , 54.01 , 55.01 to 55.04 , 56.01 to of an adhesive , other than goods 56.03 or 57.01 to 57.04 or from falling within heading No 58.06 chemical products or textile pulp

Woven labels , badges and the like, Manufacture from materials of 58.06 (') not embroidered, in the piece , in headings Nos 50.01 to 50.03 , 53.01 to strips or cut to shape or size 53.05 , 54.01 , 55.01 to 55.04 , 56.01 to 56.03 or from chemical products or textile pulp

Chenille yarn (including flock Manufacture from materials of 58.07 0) chenille yarn), gimped yarn (other headings Nos 50.01 to 50.03 , 53.01 to than metallized yarn of heading No 53.05 , 54.01 , 55.01 to 55.04 , 56.01 to 52.01 and gimped horsehair yarn); 56.03 or from chemical products or braids and ornamental trimmings in textile pulp the piece ; tassels , pompons and the like

58.08 0 ) Tulle and other net fabrics (but Manufacture from materials of not including woven , knitted or headings Nos 50.01 to 50.03 , 53.01 to crocheted fabrics), plain 53.05 , 54.01 , 55.01 to 55.04 , 56.01 to 56.03 or from chemical products or textile pulp

58.09 O Tulle and other net fabrics (but Manufacture from materials of not including woven , knitted or headings Nos 50.01 to 50.03 , 53.01 to crocheted fabrics), figured ; hand or 53.05 , 54.01 , 55.01 to 55.04 , 56.01 to mechanically made lace , in the 56.03 or from chemical products or piece , in strips or in motifs textile pulp

(') For products composed of two or more textile materials, the conditions shown in column 4 must be met in respect of each of the textile materials of which the mixed product is composed. This rule, however, does not apply to any one or more mixed textile materials whose weight does not exceed 10 % of the total weight of textile materials incorporated . This percentage shall be increased : — to 20 % where the material in question is yarn made of polyurethane segmented with flexible segments of polyether, whether or not gimped, falling within headings Nos ex 51.01 and ex 58.07 , — to 30 % where the material in question is yarn of a width not exceeding 5 mm formed of a core consisting either of a thin strip of aluminium or of a film of artificial plastic material whether or not covered with aluminium powder, this core having been inserted and glued by means of a transparent or coloured glue between two films of artificial plastic material .

No L 381 / 22 Official Journal of the European Communities 31 . 12 . 86

Products obtained Working or processing that Working or processing that does confers tne status of CCT not confer the status of originating products when the heading Description originating products following conditions are met No

58.10 Manufacture in which the value of the Embroidery, in the piece, in strips or in motifs product used does not exceed 50 % of the value of the finished product

Manufacture either from natural fibres 59.01 O Wadding and articles of wadding ; textile flock and dust and mill neps or from chemical products or textile pulp

Felt and articles of felt, with the Manufacture either from natural fibres ex 59.02 O exception of needled felt, whether or from chemical products or textile or not impregnated or coated pulp

ex 59.02 O Needled felt, whether or not Manufacture either from natural fibres impregnated or coated or from chemical products or textile pulp or from fibre or continuous polypropylene filament of which the denomination of the filaments is less than 8 denier and of which the value does not exceed 40 % of the value of the finished product

Bonded fibre fabrics , similar bonded Manufacture either from natural fibres 59.03 O yarn fabrics, and articles of such or from chemical products or textile fabrics, whether or not impregnated pulp or coated

Twine, cordage , ropes and cables , Manufacture either from natural fibres 59.04 O plaited or not or from chemical products or textile pulp or from coir yarn of heading No 57.07

Nets and netting made of twine, Manufacture either from natural fibres 59.05 O cordage or rope, and made up or from chemical products or textile fishing nets of yarn, twine, cordage pulp or from coir yarn of heading No 57.07 or rope Other articles made from yarn, Manufacture either from natural fibres 59.06 (•) twine, cordage, rope or cables, or from chemical products or textile other than textile fabrics and pulp or from coir yarn of heading articles made from such fabrics No 57.07

59.07 Textile fabrics coated with gum or Manufacture from yarn amylaceous substances, of a kind used for the outer covers of books and the like ; tracing cloth ; prepared painting canvas ; buckram and similar fabrics for hat foundations and similar uses

59.08 Textile fabrics impregnated , coated , Manufacture from yarn covered or laminated with prep­ arations of cellulose derivatives or of other artificial plastic materials

59.10 (') Linoleum and materials prepared on Manufacture either from yarn or from a textile base in a similar manner to textile fibres linoleum , whether or not cut to shape or of a kind used as floor coverings ; floor coverings consisting of a coating applied on a textile base , cut to shape or not

(') For products composed of two or more textile materials, the conditions shown in column 4 must be met in respect of each of the textile materials of which the mixed product is composed. This rule, however, does not apply to any one or more mixed textile materials whose weight does not exceed 10 % of the total weight of textile materials incorporated . This percentage shall be increased : — to 20 % where the material in question is yarn made of polyurethane segmented with flexible segments of polyether, whether or not gimped, falling within headings Nos ex 51.01 and ex 58.07 , — to 30 °/o where the material in question is yarn of a width not exceeding 5 mm formed of a core consisting either of a thin strip of aluminium or of a film of artificial plastic material whether or not covered with aluminium powder, this core having been inserted and glued by means of a transparent or coloured glue between two films of artificial plastic material .

31 . 12 . 86 No L 381 / 23 Official Journal of the European Communities

Products obtained Working or processing that Working or processing that does confers the status of CCT not confer the status of originating products when the heading Description originating products following conditions are met No

ex 59.11 Rubberized textile fabrics , other Manufacture from yarn than rubberized, knitted or crocheted goods, with the exception of those consisting of fabric of continuous synthetic textile fibres, or of fabric composed of parallel yarns of continuous synthetic textile fibres, impregnated or covered with rubber latex, containing at least 90 % by weight of textile materials and used for the manufacture of tyres or for other technical uses

ex 59.11 Rubberized textile fabrics, other Manufacture from chemical products than rubberized knitted or crocheted goods, consisting of fabric of continuous synthetic textile fibres, or of fabric composed of parallel yarns of continuous synthetic textile fibres, impregnated or covered with rubber latex, containing at least 90 % by weight of textile materials and used for the manufacture of tyres or for other technical uses

59.12 Textile fabrics otherwise impreg­ Manufacture from yarn nated or coated ; painted canvas being theatrical scenery, studio back-cloths or the like

59.13 (l) Elastic fabrics and trimmings (other Manufacture from single yarn than knitted or crocheted goods) consisting of textile materials combined with rubber threads

Manufacture from materials of 59.15 C) Textile hosepiping and similar tubing, with or without lining headings Nos 50.01 to 50.03 , 53.01 to armour or accessories of other 53.05 , 54.01 , 55.01 to 55.04 , 56.01 to materials 56.03 or 57.01 to 57.04 or from chemical products or textile pulp

Manufacture from materials of 59.16 O Transmission , conveyor or elevator belts or belting, of textile material, headings Nos 50.01 to 50.03 , 53.01 to whether or not strengthened with 53.05 , 54.01 , 55.01 to 55.04 , 56.01 to metal or other material 56.03 or 57.01 to 57.04 or from chemical products or textile pulp

59.17 O Textile fabrics and textile articles , Manufacture from materials of of a kind commonly used in headings Nos 50.01 to 50.03 , 53.01 to machinery or plant, excluding 53.05 , 54.01 , 55.01 to 55.04, 56.01 to polishing discs or rings, other than 56.03 or 57.01 to 57.04 or from of felt chemical products or textile pulp

ex 59.17 Polishing discs or rings , other than Manufacture from yarn or from waste of felt fabrics or rags of heading No 63.02

(') For products composed of two or more textile materials, the conditions shown in column 4 must be met in respect of each of the textile materials of which the mixed product is composed . This rule, however, does not apply to any one or more mixed textile materials whose weight does not exceed 10 o/o of the total weight of textile materials incorporated. This percentage shall be increased : — to 20 % where the material in question is yarn made of polyurethane segmented with flexible segments of polyether, whether or not gimped, falling within headings Nos ex 51.01 and ex 58.07 , — to 30 % where the material in question is yarn of a width not exceeding 5 mm formed of a core consisting either of a thin strip of aluminium or of a film of artificial plastic material whether or not covered with aluminium powder, this core having been inserted and glued by means of a transparent or coloured glue between two films of artificial plastic material .

No L 381 / 24 31 . 12 . 86 Official Journal of the European Communities

Products obtained Working or processing that does Working or processing that CCT confers the status of not confer the status of originating products when the heading Description originating products No following conditions are met

ex Knitted and crocheted goods, Manufacture from natural fibres, Chapter excluding knitted or crocheted carded or combed, from materials of 60 O goods obtained by sewing or by the heading Nos 56.01 to 56.03 from assembly of pieces of knitted or chemical products or textile pulp crocheted goods (cut or obtained directly to shape)

ex 60.02 Gloves, mittens and mitts , knitted Manufacture from yarn (2) or crocheted , not elastic or rubber­ ized , obtained by sewing or by the assembly of pieces of knitted or crocheted goods (cut or obtained directly to shape)

ex 60.03 Stockings , understockings , socks , Manufacture from yarn (2) ankle-socks, sockettes and the like , knitted or crocheted, not elastic or rubberized , obtained by sewing or by the assembly of pieces of knitted or crocheted goods (cut or obtained directly to shape)

ex 60.04 Under garments , knitted or cro­ Manufacture from yarn (2) cheted , not elastic nor rubberized , obtained by sewing or by the assembly of pieces of knitted or crocheted goods (cut or obtained directly to shape)

ex 60.05 Outer garments and other articles, Manufacture from yarn (2) knitted or crocheted, not elastic or rubberized, obtained by sewing or by the assembly of pieces of knitted or crocheted goods (cut or obtained directly to shape)

ex 60.06 Other articles , knitted or crocheted, Manufacture from yarn (2) elastic or rubberized (including elastic knee-caps and elastic stockings), obtained by sewing or by the assembly of pieces of knitted or crocheted goods (cut or obtained directly to shape)

ex 61.01 Men's and boys' outer garments , Manufacture from yarn (2) (3) excluding fire-resistant equipment of cloth covered by foil of alumi­ nized polyester

ex 61.01 Fire-resistant equipment of cloth Manufacture from uncoated cloth of covered by foil of aluminized which the value does not exceed polyester 40 % of the value of the finished product (2) (3)

(') For products composed of two or more textile materials , the conditions shown in column 4 must be met in respect of each of the textile materials of which the mixed product is composed . This rule , however, does not apply to any one or more mixed textile materials whose weight does not exceed 10 % of the total weight of textile materials incorporated . This percentage shall be increased : — to 20 % where the material in question is yarn made of polyurethane segmented with flexible segments of polyether, whether or not gimped, falling within heading Nos ex 51.01 and ex 58.07 , — to 30 % where the material in question is yarn of a width not exceeding 5 mm formed of a core consisting either of a thin strip of aluminium or of a film of artificial plastic material whether or not covered with aluminium powder, this core having been inserted and glued by means of a transparent or coloured glue between two films of artificial plastic material. (2) Trimmings and accessories (excluding linings and interlining) which change tariff heading do not remove the originating status of the product obtained if their weight does not exceed 10 % of the total weight of all the textile materials incorporated . (3) These provisions do not apply where the products are obtained from printed fabric in accordance with the conditions shown in List B.

31 . 12 . 86 Official Journal of the European Communities No L 381 / 25

Products obtained Working or processing that Working or processing that does confers tne status of CCT not confer the status of originating products when the heading Description originating products following conditions are met No

ex 61.02 Women's , girls' and infants' outer Manufacture from yarn ( l) (2) garments , not embroidered , ex­ cluding fire-resistant equipment of cloth covered by foil of aluminized polyester

ex 61.02 Fire-resistant equipment of cloth Manufacture from uncoated cloth of covered by foil of aluminized which the value does not exceed polyester 40 % of the value of the finished product (') (2)

ex 61.02 Women's, girls' and infants' outer Manufacture from fabrics , not garments , embroidered embroidered , the value of which does not exceed 40 % of the value of the finished product (')

61.03 Men's and boys' under garments , Manufacture from yarn (') (2) including collars , shirt fronts and cuffs

61.04 Women's , girls' and infants' under Manufacture from yarn (') garments

ex 61.05 Handkerchiefs , not embroidered Manufacture from unbleached single yarn O (2) (5)

ex 61.05 Handkerchiefs, embroidered Manufacture from fabrics , not em­ broidered, the value of which does not exceed 40 % of the value of the finished product (')

ex 61.06 Shawls , scarves , mufflers, mantillas , Manufacture from unbleached single veils and the like , not embroidered yarn of natural textile fibres or discontinuous man-made fibres or their waste or from chemical products or textile pulp (') (2)

ex 61.06 Shawls, scarves , mufflers , mantillas , Manufacture from fabrics, not em­ veils and the like, embroidered broidered, the value of which does not exceed 40 % of the value of the finished product (')

61.07 Ties , bow ties and cravats Manufacture from yarn (') (2)

61.09 Corsets , corset-belts , suspender­ Manufacture from yarn (') (2) belts , brassieres , braces , suspenders , garters and the like (including such articles of knitted or crocheted fabric), whether or not elastic

ex 61.10 Gloves , mittens , mitts , stockings , Manufacture from yarn (*) (2) socks and sockettes , not being knitted or crocheted goods excluding fire-resistant equipment of cloth covered by foil of aluminized polyester

(') Trimmings and accessories used (excluding linings and interlining) which change tariff heading do not remove the originating status of the product obtained if their weight does not exceed 10 % of the total weight of all the textile materials incorporated . (2) These provisions do not apply where the products are obtained from printed fabric in accordance with the conditions shown in List B. (3) For products obtained from two or more textile materials, this rule does not apply to one or more of the mixed textile materials if its or their weight does not exceed 10 % of the total weight of all the textile materials incorporated.

No L 381 /26 Official Journal of the European Communities 31 . 12 . 86

Products obtained Working or processing that Working or processing that does confers tne status of CCT not confer the status of originating products when the heading Description originating products No following conditions are met

ex 61.10 Fire-resistant equipment of cloth Manufacture from uncoated cloth of covered by foil of aluminized which the value does not exceed 40 % polyester of the value of the finished prod­ uct 0 0

ex 61.11 Made up accessories for articles of Manufacture from yarn (*) (2) apparel (for example, dress shields, shoulder and other pads , belts , muffs , sleeve protectors , pockets), with the exception of collars , tuck­ ers , fallals , bodice-fronts , jabots , cuffs , flounces , yokes and similar accessories and trimmings for women's and girls' garments , embroidered

ex 61.11 Collars, tuckers , fallals, bodice­ Manufacture from fabrics not em­ fronts, jabots, cuffs, flounces , yokes broidered, the value of which does not and similar accessories and exceed 40 % of the value of the trimmings for women's and girls' finished products (l) garments , embroidered

62.01 Travelling rugs and blankets Manufacture from unbleached yarn of Chapters 50 to 56 (2) (3)

ex 62.02 Bed linen, table linen, toilet linen Manufacture from unbleached single and kitchen linen ; curtains and yarn (2) (>) other furnishing articles ; not embroidered

ex 62.02 Bed linen , table linen, toilet linen Manufacture from fabrics, not and kitchen linen ; curtains and embroidered, the value of which does other furnishing articles ; embroid­ not exceed 40 % of the value of the ered finished product

62.03 Sacks and bags , of a kind used for Manufacture from chemical products , the packing or goods textile pulp or from natural textile fibres, discontinuous man-made fibres or their waste (2) (3)

62.04 Tarpaulins , sails , awnings , sun­ Manufacture from single unbleached blinds, tents and camping goods yarn (>) (3)

ex 62.05 Other made up textile articles Manufacture in which the value of the (including dress patterns) excluding products used does not exceed 40 % fans and hand-screens , non­ of the value of the finished product mechanical ; frames and handles therefor and parts of such frames and handles

64.01 Footwear with outer soles and up­ Manufacture from assemblies of pers of rubber or artificial plastic uppers affixed to inner soles or to material other sole components , but without outer soles, of any material except metal -

(*) Trimmings and accessories used (excluding linings and interlining) which change tariff heading do not remove the originating status of the product obtained if their weight does not exceed 10 % of the total weight of all the textile materials incorporated. (2) These provisions do not apply where the products are obtained from printed fabric in accordance with the conditions shown in List B. (3) For products obtained from two or more textile materials, this rule does not apply to one or more of the mixed textile materials if its or their weight does not exceed' 10 % of the total weight of all the textile materials incorporated.

31 . 12 . 86 No L 381 /27 Official Journal of the European Communities

Products obtained Working or processing that Working or processing that does confers tne status of CCT not confer the status of originating products when the heading Description originating products No following conditions are met

64.02 Footwear with outer soles of leather Manufacture from assemblies of up­ or composition leather footwear pers affixed to inner soles or to (other than footwear falling within other sole components, but without heading No 64.01 ) with outer soles outer soles, of any material except of rubber or artificial plastic metal material

64.03 Footwear with outer soles of wood Manufacture from assemblies of or of cork uppers affixed to inner soles or to other sole components, but without outer soles, of any material except metal

64.04 Footwear with outer soles of other Manufacture from assemblies of materials uppers affixed to inner soles or to other sole components, but without outer soles, of any material except metal

65.03 Felt hats and other felt headgear, Manufacture from textile fibres being headgear made from the felt hoods and plateaux falling within heading No 65.01 , whether or not lined or trimmed

65.05 Flats and other headgear (including Manufacture either from yarn or from hair nets), knitted or crocheted, or textile fibres made up from lace, felt or other textile fabric in the piece (but not from strips), whether or not lined or trimmed

66.01 Umbrellas and sunshades (including Manufacture in which the value of the walking-stick umbrellas, umbrella products used does not exceed 50 % tents, and garden and similar of the value of the finished product umbrellas)

ex 70.07 Cast, rolled, drawn or blown glass Manufacture from drawn, cast or (including flashed or wired glass) rolled glass of heading Nos 70.04 to cut to shape other than rectangular 70.06 shape, or bent or otherwise worked (for example, edge worked or engraved) whether or not surface ground or polished ; multiple-walled insulating glass

70.08 Safety glass consisting of toughened Manufacture from drawn, cast or or laminated glass, shaped or not rolled glass of headings Nos 70.04 to 70.06

70.09 Glass mirrors (including rearview Manufacture from drawn, cast or mirrors), unframed , framed or rolled glass of headings Nos 70.04 backed to 70.06

No L 381 / 28 Official Journal of the European Communities 31 . 12 . 86

Products obtained Working or processing that Working or processing that does confers the status of CCT not confer the status of originating products when the heading Description originating products No following conditions are met

71.15 Articles consisting of, or incor­ Manufacture in which the value of the porating, pearls , precious or semi­ products used does not exceed 50 % precious stones (natural , synthetic of the value of the finished product (') or reconstructed)

73.07 Blooms , billets , slabs and sheet bars Manufacture from products of (including tinplate bars), of iron or heading No 73.06 steel ; pieces roughly shaped by forging, of iron or steel

73.08 Iron or steel coils for re-rolling Manufacture from products of heading No 73.07

73.09 Universal plates of iron or steel Manufacture from products of headings Nos 73.07 to 73.08

73.10 Bars and rods (including wire rod), Manufacture from products of of iron or steel , hot-rolled, forged , heading No 73.07 extruded , cold-formed , or coldfinished (including precision-made); hollow mining drill steel

73.11 Angles , shapes and sections , of iron Manufacture from products of or steel, hot-rolled, forged, ex­ headings Nos 73.07 to 73.10 , 73.12 truded , cold-formed or cold- or 73.13 finished ; sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements

73.12 Hoop and strip, of iron or steel, Manufacture from products of hot-rolled or cold-rolled headings Nos 73.07 to 73.09 or 73.13

73.13 Sheets and plates , of iron or steel, Manufacture from products of hot-rolled or cold-rolled headings Nos 73.07 to 73.09

73.14 Iron or steel wire, whether or not Manufacture from products of coated, but not insulated heading No 73.10

73.16 Railway and tramway track con­ Manufacture from products of struction material of iron or steel, heading No 73.06 the following : rails , check-rails , switch blades , crossings (or frogs), crossing pieces , point rods , rack rails, sleepers , fish-plates, chairs , chair wedges, sole plates (base plates), rail clips, bed-plates, ties and other materials specialized for joining or fixing rails

73.18 Tubes and pipes and blanks there­ Manufacture from products of for, of iron (other than of cast iron) headings Nos 73.06 and 73.07 or or steel, excluding high-pressure heading No 73.15 in the forms hydro-electric conduits specified in headings Nos 73.06 and 73.07

74.03 Wrought bars , rods , angles , shapes Manufacture in which the value of the and sections , of copper ; copper wire products used does not exceed 50 % of the value of the finished product ( l)

(') These provisions do not apply where the products are obtained from products which have acquired the status of originating products in accordance with the conditions laid down in List B.

31 . 12 . 86 Official Journal of the European Communities No L 381 / 29

Products obtained Working or processing that does Working or processing that confers tne status of CCT not confer the status of originating products when the heading Description originating products No following conditions are met

74.04 Wrought plates , sheets and strip , of Manufacture in which the value of the copper products used does not exceed 50 % of the value of the finished product (')

74.05 Copper foil (whether or not Manufacture in which the value of the embossed, cut to shape, perforated , products used does not exceed 50 % coated, printed , or backed with of the value of the finished product (') paper or other reinforcing material), of a thickness (excluding any backing) not exceeding 0,15 mm

74.06 Copper powders and flakes Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product (')

74.07 Tubes and pipes and blanks there­ Manufacture in which the value of the for, of copper ; hollow bars of products used does not exceed 50 % copper of the value of the finished product (')

74.08 Tube and pipe fittings (for example, Manufacture in which the value of the joints , elbows , sockets and flanges), products used does not exceed 50 % of copper of the value of the finished product (')

74.10 Stranded wire , cables , cordage , Manufacture in which the value of the ropes, plaited bands and the like, of products used does not exceed 50 % copper wire , but excluding insulated of the value of the , finished product (') electric wires and cables

74.11 Gauze, cloth, grill , netting, fencing, Manufacture in which the value of the reinforcing fabric and similar products used does not exceed 50 % materials (including endless bands), of the value of the finished product (') of copper wire ; expanded metal , of copper

74.15 Nails , tacks , staples , hook-nails , Manufacture in which the value of the spiked cramps , studs , spikes and products used does not exceed 50 % drawing pins , of copper, or of iron of the value of the finished product (') or steel with heads of copper ; bolts and nuts ( including bolt ends and screw studs), whether or not threaded or tapped, and screws (including screw hooks and screw rings) of copper ; rivets , cotters , cotter-pins , washers and spring washers , of copper

74.16 Springs , of copper Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product (')

(') These provisions do not apply where the products are obtained from products which have acquired the status of originating products in accordance with the conditions laid down in List B.

No L 381 / 30 Official Journal of the European Communities 31 . 12 . 86

Products obtained Working or processing that Working or processing that does confers the status of CCT not confer the status of originating products when the heading Description originating products following conditions are met No

74.17 Cooking and heating apparatus of a Manufacture in which the value of the kind used for domestic purposes, products used does not exceed 50 % not electrically operated, and parts of the value of the finished product (') thereof, of copper

74.18 Other articles of a kind commonly Manufacture in which the value of the used for domestic purposes, sanitary products used does not exceed 50 % ware for indoor use, and parts of of the value of the finished product (') such articles and ware , of copper

74.19 Other articles of copper Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product (')

75.02 Wrought bars , rods, angles , shapes Manufacture in which the value of the and sections, of nickel ; nickel wire products used does not exceed 50 % of the value of the finished product (')

75.03 Wrought plates, sheets and strip, of Manufacture in which the value of the nickel ; nickel foil ; nickel powders products used does not exceed 50 % and flakes of the value of the finished product (')

75.04 Tubes and pipes and blanks there­ Manufacture in which the value of the for, of nickel ; hollow bars , and tube products used does not exceed 50 % and pipe fittings (for example, of the value of the finished product (*) joints, elbows , sockets and flanges), of nickel

75.05 Electro-plating anodes, of nickel, Manufacture in which the value of the wrought or unwrought, including products used does not exceed 50 % those produced by electrolysis of the value of the finished product (*)

75.06 Other articles of nickel Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product (')

76.02 Wrought bars , rods , angles , shapes Manufacture in which the value of the and sections , of aluminium ; products used does not exceed 50 % aluminium wire of the value of the finished product

76.03 Wrought plates, sheets and strip, of Manufacture in which the value of the aluminium products used does not exceed 50 % of the value of the finished product

76.04 Aluminium foil (whether or not Manufacture in which the value of the embossed, cut to shape, perforated , products used does not exceed 50 % coated, printed, or backed with of the value of the finished product paper or other reinforcing material), of a thickness (excluding any backing) not exceeding 0,20 mm

(') These provisions do not apply where the products are obtained from products which have acquired the status of originating products in accordance with the conditions laid down in List B.

31 . 12 . 86 Official Journal of the European Communities No L 381 / 31

Products obtained Working or processing that Working or processing that does confers the status of CCT not confer the status of originating products when the heading Description originating products No following conditions are met

76.05 Aluminium powders and flakes Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product

76.06 Tubes and pipes and blanks there­ Manufacture in which the value of the for, of aluminium ; hollow bars of products used does not exceed 50 % aluminium of the value of the finished product

76.07 Tube and pipe fittings (for example, Manufacture in which the value of the joints, elbows , sockets and flanges), products used does not exceed 50 % of aluminium of the value of the finished product

76.08 Structures and parts of structures Manufacture in which the value of the (for example , hangars and other products used does not exceed 50 % buildings, bridges and bridge­ of the value of the finished product sections , towers, lattice masts, roofs , roofing frameworks , door and window frames, balustrades , pillars and columns), of aluminium ; plates , rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of aluminium

76.09 Reservoirs , tanks , vats and similar Manufacture in which the. value of the containers , for any material (other products used does not exceed 50 % than compressed or liquefied gas), of the value of the finished product of aluminium of a capacity exceeding 300 litres , whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment

76.10 Casks , drums , cans , boxes and Manufacture in which the value of the similar containers (including rigid products used does not exceed 50 % and collapsible tubular containers), of the value of the finished product of aluminium, of a description commonly used for the conveyance or packing of goods

76.11 Containers , of aluminium, for Manufacture in which the value of the compressed or liquefied gas products used does not exceed 50 % of the value of the finished product

76.12 Stranded wire , cables, cordage, Manufacture in which the value of the ropes , plaited bands and the like, of products used does not exceed 50 % aluminium wire, but excluding of the value of the finished product insulated electric wires and cables

76.15 Articles of a kind commonly used Manufacture in which the value of the for domestic purposes, sanitary products used does not exceed 50 % ware for indoor use , and parts of of the value of the finished product such articles and ware , of alu­ minium

No L 381 / 32 Official journal of the European Communities 31 . 12 . 86

Products obtained Working or processing that Working or processing that does confers the status of CCT not confer the status of originating products when the heading Description originating products following conditions are met No

76.16 Other articles of aluminium Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product

77.02 Wrought bars , rods , angles , shapes Manufacture in which the value of the and sections, of magnesium ; products used does not exceed 50 % magnesium wire ; wrought plates , of the value of the finished product sheets and strip , of magnesium ; magnesium foil ; raspings and shavings of uniform size, powders and flakes , of magnesium ; tubes and pipes and blanks therefor, of magnesium ; hollow bars of magne­ sium ; other articles of magnesium

78.02 Wrought bars , rods , angles , shapes Manufacture in which the value of the and sections , of lead ; lead wire products used does not exceed 50 % of the value of the finished product (')

78.03 Wrought plates , sheets and strip , of Manufacture in which the value of the lead products used does not exceed 50 % of the value of the finished product (')

78.04 Lead foil (whether or not embossed , Manufacture in which the value of the cut to shape , perforated , coated , products used does not exceed 50 % printed , or backed with paper or of the value of the finished product (') other reinforcing material) of a weight (excluding any backing) not exceeding 1,7 kg/ m2 ; lead powders and flakes

78.05 Tubes and pipes and blanks there­ Manufacture in which the value of the for, of lead ; hollow bars , and tube products used does not exceed 50 % and pipe fittings (for example , of the value of the finished product (') joints , elbows , sockets , flanges and S-bends), of lead

78.06 Other articles of lead Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product (')

79.02 Wrought bars , rods , angles , shapes Manufacture in which the value of the and sections , of zinc ; zinc wire products used does not exceed 50 % of the value of the finished product

79.03 Wrought plates , sheets and strip, of Manufacture in which the value of the zinc ; zinc foil ; zinc powders and products used does not exceed 50 % flakes of the value of the finished product

79.04 Tubes and pipes and blanks there­ Manufacture in which the value of the for, of zinc ; hollow bars , and tube products used does not exceed 50 % and pipe fittings (for example, of the value of the finished product joints , elbows , sockets and flanges), of zinc

(') These provisions do not apply where the products are obtained from products which have acquired the status of originating products in accordance with the conditions laid down in List B.

31 . 12 . 86 Official Journal of the European Communities No L 381 / 33

Products obtained Working or processing that does Working or processing that confers the status of CCT not confer the status of originating products when the heading Description originating products No following conditions are met

79.06 Other articles of zinc Manufacture in which the value of the products used does not exceed 50% of the value of the finished product

80.02 Wrought bars , rods , angles , shapes Manufacture in which the value of the and sections , of tin ; tin wire products used does not exceed 50% of the value of the finished product

80.03 Wrought plates , sheets and strip, of Manufacture in which the value of the tin products used does not exceed 50 % of the value of the finished product

80.04 Tin foil (whether or not embossed, Manufacture in which the value of the cut to shape, perforated, coated, products used does not exceed 50 % printed, or backed with paper or of the value of the finished product other reinforcing material), of a weight (excluding any backing) not exceeding 1 kg/ m2 ; tin powders and flakes

80.05 Tubes and pipes and blanks there­ Manufacture in which the value of the for, of tin ; hollow bars , and tube products used does not exceed 50 % and pipe fittings (for example, of the value of the finished product joints , elbows , sockets and flanges), of tin

82.05 Interchangeable tools for hand Working, processing or assembly in tools , for machine tools or for which the value of the materials and power-operated hand tools (for parts used does not exceed 40 % of example , for pressing, stamping, the value of the finished product (') drilling, tapping, threading, boring, broaching, milling, cutting, turning, dressing, morticing or screw­ driving), including dies for wire drawing, extrusion dies for metal, and rock drilling bits

82.06 Knives and cutting blades , for Working, processing or assembly in machines or for mechanical which the value of the materials and appliances parts used does not exceed 40 % of the value of the finished product (')

ex Boilers , machinery and mechanical Working, processing or assembly in Chapter appliances and parts thereof, which the value of the materials and 84 excluding refrigerators and refri­ parts used does not exceed 40 % of gerating equipment (electrical and the value of the finished product (2) other) (heading No 84.15) and sewing machines (lock-stitch only) with heads of a weight not exceeding 16 kg without motor or 17 kg including the motor (No ex 84.41 )

(') These provisions do not apply where the products are obtained from products which have acquired the status of originating products in accordance with the conditions laid down in List B. (2) These provisions shall not apply to fuel elements of heading No 84.59 until 31 December 1988 .

No L 381 / 34 Official Journal of the European Communities 31 . 12 . 86

Products obtained Working or processing that Working or processing that does confers the status of CCT not confer the status of originating products when the heading Description originating products No following conditions are met

84.15 Refrigerators and refrigerating Working, processing or assembly in equipment (electrical and other) which the value of the non-originating materials and parts used does not exceed 40 % of the value of the finished product, and provided that at least 50 % in value of the materials and parts (') used are originating pro­ ducts

ex 84.41 Sewing machines (lock-stitch only) Working, processing or assembly in with heads of a weight not which the value of the non-originating exceeding 16 kg without motor or materials and parts used does not 1 7 kg including the motor exceed 40 % of the value of the finished product, and provided that :

— at least 50 % in value of the ma­ terials and parts (*) used for the assembly or the head (motor excluded) are originating products and

— the thread tension, crochet and zigzag mechanisms are originating products

ex Electrical machinery and Working, processing or assembly in Chapter equipment ; parts thereof; excluding which the value of the non-originating 85 products of heading No 85.14 or materials and parts used do not exceed 85.15 40 % of the value of the finished pro­ duct

85.14 Microphones and stands therefor ; Working, processing or assembly in loudspeakers ; audio-frequency which the value of the non-originating electric amplifiers materials and parts used does not exceed 40 % of the value of the finished product, and provided that :

— at least 50 % in value of the ma­ terials and parts (') used are orig­ inating products, and

— the value of the non-originating transistors used does not exceed 3 % of the value of the finished product (2)

(') In determining the value of products, materials and parts, the following must be taken into account : (a) in respect of originating products, materials and parts, the first verifiable price paid, or the price which would be paid in case of sale, for the said products on the territory of the country where working, processing or assembly is carried out ; (b) in respect of other products, materials and parts, the provisions of Article 4 of this Regulation determining : — the value of imported products, — the value of products of undetermined origin. (2) This percentage is not cumulative with the 40 % .

31 . 12 . 86 No L 381 / 35 Official Journal of the European Communities

Products obtained Working or processing that Working or processing that does confers tne status of CCT not confer the status of heading Description originating products originating products when the No following conditions are met

85.15 Radiotelegraphic and radiotele­ Working, processing or assembly in phonic transmission and reception which the value of tne non-originating apparatus ; radio-broadcasting and materials and parts used does not television transmission and recep­ exceed 40 % of the value of the tion apparatus (including receivers finished product, and provided that : incorporating sound recorders or reproducers) and television cameras ; — at least 50 % in value of the ma­ radio navigational aid apparatus , radar apparatus and radio remote­ terials and parts (') used are orig­ inating products, and control apparatus

— the value of the non-originating transistors used does not exceed 3 % of the value of the finished product (2)

Chapter Railway and tramway locomotives , Working, processing or assembly in 86 rolling-stock and parts thereof; rail­ which tne value of the materials and way and tramway track fixtures and parts used does not exceed 40 % of fittings ; traffic signalling equipment the value of the finished product of all kinds (not electrically powered)

ex Vehicles, other than railway or Working, processing or assembly in Chapter tramway rolling-stock, and parts which the value of the materials and 87 thereof, excluding products of parts used does not exceed 40 % of heading No 87.09 the value of the finished product

87.09 Motor-cycles , auto-cycles and Working, processing or assembly in cycles fitted with an auxiliary which the value of tne non-originating motor, with or without side-cars ; materials and parts used does not side-cars of all kinds exceed 40 % of the value of the finished product, and provided that at least 50 % in value of the materials and parts (') used are originating pro­ ducts

ex Optical, photographic, cinemato­ Working, processing or assembly in Chapter graphic, measuring, checking, which tne value of the materials and 90 precision, medical and surgical parts used does not exceed 40 % of instruments and apparatus and parts the value of the finished product thereof, excluding products of headings Nos 90.05 , 90.07 (except electrically ignited flashbulbs), 90.08 , 90.12 and 90.26

(') In determining the value of products, materials and parts, the following must be taken into account : (a) in respect of originating products, materials and parts, the first verifiable price paid, or the price which would be paid in case of sale, for the said products on the territory of the country where working, processing or assembly is carried out ; (b) in respect of other products, materials and parts, the provisions of Article 4 of this Regulation determining : — the value of imported products, — the value of products of undetermined origin. (2) This percentage is not cumulative with the 40 °/o .

No L 381 / 36 Official Journal of the European Communities 31 . 12 . 86

Products obtained Working or processing that Working or processing that does confers tne status of CCT not confer the status of originating products when the heading Description originating products No following conditions are met

90.05 Refracting telescopes (monocular Working, processing or assembly in and binocular), prismatic or not which the value of the non-originating materials and parts used does not exceed 40 % of the value of the finished product, and provided that at least 50 % in value of the materials and parts (') used are originating pro­ ducts

90.07 Photographic cameras ; photo­ Working, processing or assembly in graphic flashlight apparatus and which tne value of the non-originating flashbulbs other than discharge materials and parts used does not lamps of heading No 85.20 , with exceed 40 % of the value of the the exception of electrically ignited finished product, and provided that at flashbulbs least 50 % in value of the materials and parts (') used are originating pro­ ducts

90.08 Cinematographic cameras, projec­ Working, processing or assembly in tors , sound recorders and sound which the value of the non-originating reproducers but not including re­ materials and parts used does not recorders or film editing apparatus ; exceed 40 % of the value of the any combination of these articles finished product, and provided that at least 50 % in value of the materials and parts (') used are originating pro­ ducts

90.12 Compound optical microscopes , Working, processing or assembly in whether or not provided with means which the value of the non-originating for photographing or projecting the materials and parts used does not image exceed 40 % of the value of the finished product, and provided that at least 50 % in value of the materials and parts (') used are originating pro­ ducts

90.26 Gas , liquid and electricity supply or Working, processing or assembly in production meters ; calibrating which the value of the non-originating meters therefor materials and parts used does not exceed 40 % of the value of the finished product, and provided that at least 50 % in value of the materials and parts (') used are originating pro­ ducts

ex Chapter Clocks and watches and parts Working, processing or assembly in 91 thereof, excluding products of which the value of the materials and heading No 91.04 or 91.08 parts used does not exceed 40 % of the value of the finished product

91.04 Other clocks Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 40 % of the value of the finished product, and provided that at least 50 % in value of the materials and parts (x) used are originating pro­ ducts

(') In determining the value of products, materials and parts , the following must be taken into account : (a) in respect of originating products and parts, the first verifiable price paid, or the price which would be paid in case of sale, for the said products on the territory of the country where working, processing or assembly is carried out ; (b) in respect of other products, materials and parts, the provisions of Article 4 of this Regulation determining : — the value of imported products, — the value of products of undetermined origin .

31 . 12 . 86 Official Journal of the European Communities No L 381 /37

Products obtained Working or processing that Working or processing that does confers the status of CCT not confer the status of originating products when the heading Description originating products No following conditions are met

9 . 08 Clock movements , assembled Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 40 % of the value of the finished product, and provided that at least 50 % in value of the materials and parts (') used are originating pro­ ducts

ex Musical instruments , sound recor­ Working, processing or assembly in Chapter ders or reproducers , television which the value of the materials and 92 image and sound recorders or repro­ parts used does not exceed 40 % of ducers ; parts and accessories of the value of the finished product such articles, excluding products of heading No 92.1 1

92.11 Gramophones, dictating machines Working, processing or assembly in and other sound recorders or repro­ which the value of the non-originating ducers , including record-players materials and parts used does not and tape decks, with or without exceed 40 % of the value of the sound-heads ; television image and finished product, and provided that : sound recorders or reproducers — at least 50 % in value of the ma­ terials and parts (*) used are orig­ inating products , and

— the value of the non-originating transistors used does not exceed 3 % of the value of the finished product (2)

Chapter Arms and ammunition ; parts thereof Manufacture in which the value of the 93 products used does not exceed 50 % of the value of the finished product

96.01 Other brooms and brushes Manufacture in which the value of the (including brushes of a kind used as products used does not exceed 50 % parts of machines); paint rollers ; of the value of the finished product squeegees (other than roller squeegees) and mops

97.03 Other toys ; working models of a Manufacture in which the value of the kind used for recreational purposes products used does not exceed 50 % of the value of the finished product

98.01 Buttons and button moulds , studs , Manufacture in which the value of the cuff-links, and press fasteners , products used does not exceed 50 % including snap-fasteners and press­ of the value of the finished product studs , blanks and parts of such articles

98.08 Typewriter and similar ribbons , Manufacture in which the value of the whether or not on spools ; inkpads, products used does not exceed 50 % with or without boxes of the value of the finished product

(') In determining the value of products, materials and parts the following must be taken into account : (a) in respect of originating products , materials and parts, the first verifiable price paid, or the price which would be paid in case of sale, for the said prdducts on the territory of the country where working, processing or assembly is carried out ; (b) in respect of other products, materials and parts, the provisions of Article 4 of this Regulation determining : — the value of imported products, — the value of products of undetermined origin . ( 2 ) This percentage is not cumulative with the 40 % .

No L 381 / 38 Official Journal of the European Communities 31 . 12 . 86

ANNEX III

LIST B

List of working or processing operations which do not result in a change of tariff heading, but which do confer the status of 'originating products' on the products undergoing such operations

Finished products

CCT Working or processing that confers the heading Description status of originating products No

Incorporation of non-originating materials and parts in boilers, machinery, mechanical appliances, etc., of Chapters 84 to 92 in boilers and radiators of heading No 73.37 and in the products contained in headings Nos 97.07 and 98.03 does not make such products lose their status of originating products, provided that the value of these products does not exceed 5 % of the value of the finished product

13.02 Shellac, seed lac, stick lac and other lacs ; natural Working, processing or assembly in which the value of gums, resins , gum-resins and balsams the non-originating materials and parts used does not exceed 50 % of the value of the finished product

ex 15.10 Fatty alcohols Manufacture from fatty acids

ex 17.01 Beet sugar and cane sugar, in solid form , flavoured Manufacture from beet sugar and cane sugar in solid or coloured form without flavouring or colouring of which the value does not exceed 30 % of the value of the finished product

ex 17.02 Lactose, glucose , maple or other sugars , in solid Manufacture from other sugars in solid form without form, flavoured or coloured flavouring or colouring of which the value does not exceed 30 % of the value of the finished product

ex 17.03 Molasses, flavoured or coloured Manufacture from products without flavouring or colouring of which the value does not exceed 30 % of the value of the finished product

ex 21.03 Prepared mustard Manufacture from mustard flour

ex 22.09 Whisky of an alcoholic strength of less than 50° Manufacture from alcohol deriving exclusively from the distillation of cereals and in which the value of the non-originating constituent products does not exceed 1 5 % of the value of the finished product

ex 25.15 Marble squared by sawing, of a thickness not Sawing into slabs or sections, polishing, grinding and exceeding 25 cm cleaning of marble, including marble not further worked than roughly split, roughly squared or squared by sawing, of a thickness exceeding 25 cm

ex 25.16 Granite, porphyry, basalt, sandstone and other Sawing of granite, porphyry, basalt, sandstone and monumental and building stone, squared by sawing, other building stone, including such stone not further of a thickness not exceeding 25 cm worked than roughly split, roughly squared or squared by sawing, of a thickness exceeding 25 cm

ex 25.18 Calcined dolomite ; agglomerated dolomite Calcination of unworked dolomite (including tarred dolomite)

ex 25.19 Other magnesium oxide, whether or not chemically Manufacture from natural magnesium carbonate pure (magnesite)

31 . 12 . 86 Official Journal of the European Communities No L 381 / 39

Finished products

CCT Working or processing that confers the heading status or originating products Description No

ex 25.32 Earth colours, calcined or powdered Crushing and calcination or powdering of earth colours

ex Chapters Products of the chemical and allied industries Working or processing in which the value of the non­ 28 to 37 excluding sulphuric anhydride (ex 28.13), tannins originating products used does not exceed 20 % of the (ex 32.01 ), essential oils, resinoids and terpenic by­ value of the finished product products (ex 33.01 ), prepared enzymes not else­ where specified or included (ex 35.07)

ex 28.13 Sulphuric anhydride Manufacture from sulphur dioxide

ex 32.01 Tannins (tannic acids), including water-extracted Manufacture from tanning extracts of vegetable origin gall-nut tannin, and their salts, ethers , esters and other derivatives

ex 33.01 Essential oils (terpeneless or not), concretes and Manufacture from concentrates of essential oils in fats, absolutes ; resinoids ; terpenic by-products of the in fixed oils, or in waxes or the like, obtained by cold deterpenation of essential oils absorption or by maceration

ex 35.07 Prepared enzymes not elsewhere specified or inclu­ Manufacture in which the value of the products used ded does not exceed 50 % of the value of the finished pro­ duct

ex Chapter 38 Miscellaneous chemical products, other than Working or processing in which the value of the non­ refined tall oil (ex 38.05), spirits of sulphate turpen­ originating materials used does not exceed 20 % of the tine, purified (ex 38.07) and wood pitch (wood tar value of the finished product pitch) (ex 38.09)

ex 38.05 Refined tall oil Refining of crude tall oil

ex 38.07 Sulphate turpentine, purified Purification consisting of the distillation or refining of raw sulphate turpentine

ex 38.09 Wood pitch (wood tar pitch) Distillation of wood tar

ex Chapter 39 Artificial resins and plastic materials, cellulose Working or processing in which the value of the non­ esters and ethers ; articles thereof, excepting films of originating materials used does not exceed 20 % of the ionomers (ex 39.02) value of the finished product

ex 39.02 Ionomer film Manufacture from a thermoplastic partial salt which is a copolymer of ethylene and metacrylic acid partly neutralized with metal ions, mainly zinc and sodium

ex 40.01 Slabs of crepe rubber for soles Lamination of crepe sheets of natural rubber

ex 40.07 Vulcanized rubber thread and cord, textile covered Manufacture from vulcanized rubber thread or cord, not textile covered

No L 381 / 40 31 . 12 . 86 Official Journal of the European Communities

Finished products

CCT Working or processing that confers the heading status of originating products Description No

ex 41.01 Sheepskins and lambskins without the wool Removing wool from sheepskins and lambskins in the wool

ex 41.02 Retanned bovine cattle leather (including buffalo Retanning of bovine cattle leather (including buffalo leather) and equine leather prepared but not leather) and equine leather, not further prepared than parchment-dressed except leather falling within tanned headings Nos 41.06 and 41.08

ex 41.03 Retanned sheepskin and lambskin leather, prepared Retanning of sheepskin and lambskin leather, not but not parchment-dressed, except leather falling further prepared than tanned within headings Nos 41.06 and 41.08

ex 41.04 Retanned goatskin and kidskin leather, prepared Retanning of goatskin and kidskin leather, not further but not parchment-dressed, except leather falling prepared than tanned within headings Nos 41.06 and 41.08

ex 41.05 Other kinds of retanned leather, prepared but not Retanning of other kinds of leather, not further parchment-dressed , except leather falling within prepared than tanned headings Nos 41.06 and 41.08

ex 43.02 Assembled furskins Bleaching, dyeing, dressing, cutting and assembling of tanned or dressed furskins

ex 44.22 Casks, barrels, vats , tubs , buckets and other Manufacture from riven staves of wood, not further coopers' products and parts thereof prepared than sawn on one principal surface ; sawn staves of wood, of which at least one principal surface has been cylindrically sawn, not further prepared than sawn

ex 47.01 Sulphate pulp derived by mechanical or chemical Manufacture from unbleached sulphate pulp derived by means from any fibrous vegetable material , mechanical or chemical means from any fibrous vege­ bleached table material, provided that the value or the non-origi­ nating products used does not exceed 60 % of the value of the finished product

ex 50.03 Silk waste carded or combed Carding or combing waste silk

ex 50.09 ex 51.04 ex 53.11 Printing accompanied by finishing operations (bleach­ ex 53.12 ing, dressing, drying, steaming, burling, mending, im­ ex 54.05 Printed fabrics pregnating, sanforizing, mercerizing) of fabrics the ex 55.07 value of which does not exceed 47,5 % of the value of ex 55.08 the finished product ex 55.09 ex 56.07

ex 59.14 Incandescent gas mantles Manufacture from tubular gasmantle fabric

ex 67.01 Feather dusters Manufacture from feathers, parts of feathers or down

ex 68.03 Articles of slate , including articles of agglomerated Manufacture of articles of slate slate

31 . 12 . 86 Official Journal of the European Communities No L 381 / 41

Finished products

CCT Working or processing that confers the heading status of originating products Description No

ex 68.04 Hand publishing stones, whetstones , oilstones , hones Cutting, adjusting and gluing of abrasive materials , and the like, of natural stone, of agglomerated which, owing to their shape, are not recognizable as natural or artificial abrasives, or of pottery being intended for hand use

ex 68.13 Articles of asbestos ; articles of mixtures with a basis Manufacture of articles of asbestos or of mixtures with of asbestos or of mixtures with a basis of asbestos a basis of asbestos, or of mixtures with a basis of and magnesium carbonate asbestos and magnesium carbonate

ex 68.15 Articles of mica, including bonded mica splittings Manufacture of articles of mica on a support of paper or fabric

ex 70.10 Cut-glass bottles Cutting of bottles the value of which does not exceed 50 % of the value of the finished product

70.13 Glassware (other than articles falling within head­ Cutting of glassware the value of which does not ing No 70.19) of a kind commonly used for table, exceed 50 % of the value of the finished product or kitchen , toilet or office purposes , for indoor decoration , with the exception of silk-screen printing, decoration , or similar uses carried out entirely by hand, of hand-blown glassware the value of which does not exceed 50 % of the value of the finished product

ex 70.20 Articles made from glass fibre Manufacture from unworked glass fibre

ex 71.02 Precious and semi-precious stones , cut or otherwise Manufacture from unworked precious and semi­ worked , but not mounted, set or strung (except precious stones ungraded stones temporarily strung for convenience of transport)

ex 71.03 Synthetic or reconstructed precious or semi­ Manufacture from unworked synthetic or recon­ precious stones , cut or otherwise worked , but structed precious or semi-precious stones not mounted , set or strung (except ungraded stones temporarily strung for convenience of transport)

ex 71.05 Silver and silver alloys , including silver gilt and Rolling, drawing, beating or grinding of unwrought platinum-plated silver, semi-manufactured silver and silver alloys

ex 71.05 Silver, including silver gilt and platinum-plated Alloying or electrolytic separation of unwrought silver silver, unwrought and silver alloys

ex 71.06 Rolled silver, semi-manufactured Rolling, drawing, beating or grinding of unwrought rolled silver

ex 71.07 Gold, including platinum-plated gold, semi­ Rolling, drawing, beating or grinding of unwrought manufactured gold, including platinum-plated gold

ex 71.07 Gold, including platinum-plated gold, unwrought Alloying or electrolytic separation of unwrought gold or gold alloys

ex 71.08 Rolled gold on base metal or silver, semi­ Rolling, drawing, beating or grinding of unwrought manufactured rolled gold on base metal or silver

No L 381 /42 Official Journal of the European Communities 31 . 12 . 86

Finished products

CCT Working or processing that confers the heading status of originating products Description No

ex 71.09 Platinum and other metals of the platinum group, Rolling, drawing, beating or grinding of unwrought semi-manufactured platinum or other metals of the platinum group

ex 71.09 Platinum and other metals of the platinum group, Alloying or electrolytic separation of unwrought unwrought platinum or other metals of the platinum group

ex 71.10 Rolled platinum or other platinum group metals, on Rolling, drawing, beating or grinding of unwrought base metal or precious metal, semi-manufactured rolled platinum or other unwrought platinum group metals, on base metal or precious metal

ex 73.15 Alloy steel and high carbon steel :

— in the forms mentioned in headings Nos 73.07 Manufacture from products in the forms mentioned in to 73.13 heading No 73.06

— in the forms mentioned in headings No 73.14 Manufacture from products in the forms mentioned in heading No 73.06 or 73.07

ex 74.01 Unrefined copper (blister copper and other) Smelting of copper matte

ex 74.01 Refined copper Fire-refining or electrolytic refining of unrefined copper (blister copper and other) copper waste or scrap

ex 74.01 Copper alloy Fusion and thermal treatment of refined copper, copper waste or scrap

ex 75.01 Unwrought nickel (excluding electro-plating Refining by electrolysis, by fusion or chemically, of anodes of heading No 75.05) nickel mattes, nickel speiss and other intermediate products of nickel metallurgy

ex 75.01 Unwrought nickel except nickel alloys Refining of waste by electrolysis, by melting or by chemical means of waste and scrap

ex 76.01 Unwrought aluminium Manufacture by thermal or electrolytic treatment of unalloyed aluminium, waste and scrap

76.16 Other articles of aluminium Manufacture in which gauze, cloth, grill, netting, fenc­ ing, reinforcing fabric and similar materials (including endless bands) of aluminium wire, or expanded metal of aluminium, are used the value of which does not exceed 50 % of the value of the finished product

ex 77.02 Other articles of magnesium Manufacture from wrought bars, rods, angles, shapes and sections, plates, sheets and strip, wire, foil, rasp­ ings and shavings of uniform size, powders and flakes, tubes and pipes and blanks therefor, hollow bars, of magnesium, the value of which does not exceed 50 % of the value of the finished product

ex 77.04 Beryllium, wrought Rolling, drawing or grinding of unwrought beryllium the value of which does not exceed 50 % of the value of the finished product

ex 78.01 Refined lead Manufacture by thermal refining from bullion lead

ex 81.01 Tungsten , wrought Manufacture from unwrought tungsten the value of which does not exceed 50 °/o of the value of the fin­ ished product

31 . 12 . 86 Official Journal of the European Communities No L 381 / 43

Finished products

CCT Working or processing that confers the heading Description status of originating products No

ex 81.02 Molybdenum, wrought Manufacture from unwrought molybdenum the value of which does not exceed 50 % of the value of the finished product

ex 81.03 Tantalum , wrought Manufacture from unwrought tantalum the value of which does not exceed 50 % of the value of the finished product

ex 81.04 Other base metals, wrought Manufacture from other base metals, unwrought, the value of which does not exceed 50 % of the value of the finished product

ex 82.09 Knives with cutting blades, serrated or not (includ­ Manufacture from knife blades ing pruning knives) other than knives falling within heading No 82.06

ex 83.06 Indoor ornaments made from base metals other Working or processing in which the value of the non­ than statuettes originating materials used does not exceed 30 % of the value of the finished product

ex 84.05 Steam engines (including mobile engines , but not Working, processing or assembly in which the value of steam tractors falling within heading No 87.01 or the products used does not exceed 40 % of the value mechanically propelled road rollers) with self­ of the finished product contained boilers

84.06 Internal combustion piston engines Working, processing or assembly in which the value of the materials and parts used does not exceed 40 % of the value of the finished product

ex 84.08 Engines and motors , excluding reaction engines Working, processing or assembly in which the value of and gas turbines the non-originating materials and parts used does not exceed 40 % of the value of the finished product, and provided that at least 50 % in value of the materials and parts (') used are originating products

84.16 Calendering and similar rolling machines (other Working, processing or assembly in which the value of than metal-working and metal-rolling machines and the non-originating materials and parts used does not glass-working machines) and cylinders therefor exceed 25 % of the value of the finished product

ex 84.17 Machinery, plant and similar laboratory equipment, Working, processing or assembly in which the value of whether or not electrically heated, for the treatment the non-originating materials and parts used does not of materials by a process involving a change of exceed 25 % of the value of the finished product temperature, for wood, paper pulp, paper and paperboard manufacturing industries

84.31 Machinery for making or finishing cellulosic pulp, Working, processing or assembly in which the value of paper or paperboard the non-originating materials and parts used does not exceed 25 % of the value of the finished product

84.33 Paper or paperboard cutting machines of all kinds ; Working, processing or assembly in which the value of other machinery for making up paper pulp, paper the non-originating materials and parts used does not or paperboard exceed 25 % of the value of the finished product

(') In determining the value of products, materials and parts , the following must be taken into account : (a) in respect of originating products, materials and parts, the first verifiable price paid, or the price which would be paid in case of sale, for the said products on the territory of the country where working, processing or assembly is carried out ; (b) in respect of other products, materials and parts , the provisions of Article 4 of this Regulation determining : — the value of imported products, — the value of products of undetermined origin .

No L 381 / 44 Official Journal of the European Communities 31 . 12 . 86

Finished products

CCT Working or processing that confers the status of originating products heading Description No

ex 84.41 Sewing machines , including furniture specially Working, processing or assembly in which the value of designed for sewing machines the non-originating materials and parts used does not exceed 40 % of the value of the finished product, and provided that — at least 50 % in value of the materials and parts ( l) used for assembly of the head (motor excluded) are originating products — and the thread tension, crochet and zigzag mechan­ isms are originating products

85.14 Microphones and stands therefor ; loudspeakers ; Working, processing or assembly in which the value of audio-frequency electric amplifiers the non-originating materials and parts used does not exceed 40 % of the value of the finished product and provided that at least 50 % of the materials and parts used are originating products (')

85.15 Radiotelegraphic and rediotelephonic transmission Working, processing or assembly in which the value of and reception apparatus ; radio-broadcasting and the non-originating materials and parts used does not television transmission and reception apparatus exceed 40 % of the value of the finished product and (including receivers incorporating sound recorders provided that at least 50 % of the materials and parts or reproducers) and television cameras ; radio navi­ used are originating products (2) gational aid apparatus , radar apparatus and radio remote control apparatus

87.06 Parts and accessories of the motor vehicles falling Working, processing or assembly in which the value of within heading No 87.01 , 87.02 or 87.03 the materials and parts used does not exceed 15 % of the value of the finished product

ex 94-01 Chairs and other seats (other than those falling Working, processing or assembly in which unstuffed within heading No 94.02) whether or not convert­ cotton cloth is used of a weight of 300 g/m2 or less in ible into beds , made of base metals the form ready to use, of which the value does not exceed 25 % of the value of the finished product (})

ex 94.03 Other furniture of base metal Working, processing or assembly in which unstuffed cotton cloth is used of a weight of 300 g/m2 or less in the form ready to use, of which the value does not exceed 25 % of the value of the finished product (3)

ex 95.05 Articles in tortoise shell , mother of pearl, ivory, Manufacture from tortoise shell, mother of pearl, bone, horn , coral (natural or agglomerated) and ivory, bone, horn, coral (natural or agglomerated) and other animal carving material other animal carving material ; worked

ex 95.08 Articles in vegetable carving material (for example Manufacture from vegetable carving material (for corozo), meerschaum and amber, natural or example corozo), meerschaum and amber, natural or reconstituted, jet ( and mineral substitutes for jet) reconstituted, jet (and mineral substitutes for jet); worked

ex 96.01 Brushes and brooms Manufacture using prepared knots and tufts for broom or brush making the value of which does not exceed 50 % of the value of the finished product

ex 97.06 Golfclub heads , of wood or other materials Manufacture from roughly shaped blocks

ex 98.11 Smoking pipes , pipe bowls , of wood , root or other Manufacture from roughly shaped blocks materials

(*) In determining the value of products, materials and parts, the following must be taken into account : (a) in respect of originating products , materials and parts , the first verifiable price paid, or the price which would be paid in case of sale, for the said products on the territory of the country where working, processing or assembly is carried out ; (b) in respect of other products, materials and parts , the provision of Article 4 of this Regulation determining : — the value of imported products, — the value of products of undetermined origin . (2) The application of this rule must not result in the percentage of 3 % of the non-originating transistors laid down in List A for the same tariff heading being exceeded . (3) This rule does not apply when the general rule of change of tariff heading is applied to the other non-originating parts which are part of the composition of the final product.

31 . 12 . 86 Official Journal of the European Communities No L 381 /45

ANNEX IV

LIST C

List of products referred to in Article 1

CCT heading Description No

ex 27.07 Assimilated aromatic oils as defined in Note 2 to Chapter 27, of which more than 65 % by volume distils at a temperature of up to 250 °C (including mixtures of petro­ leum spirit and benzole), for use as power or heating fuels

27.09 \ Mineral oils and products of their distillation ; bituminous substances ; mineral waxes to 27.16 j

ex 29.01 Hydrocarbons :

— Acyclic — Cyclanes and cyclenes, excluding azulenes — Benzene, toluene, xylenes for use as power or heating fuels

ex 34.03 Lubricating preparations containing petroleum oils or oils obtained from bituminous minerals, but not including preparations containing 70 °/o or more by weight of petro­ leum oils or of oils obtained from bituminous minerals

ex 34.04 Waxes with a basis of paraffin, of petroleum waxes, of waxes obtained from bituminous minerals , of slack wax or of scale wax

ex 38.14 Prepared additives for lubricants

MOVEMENT CERTIFICATE ANNEX V

1 - Exporter (Name, full address, country) EUR.1 No A 000.000

See note* overleaf before completing this form

2. Certificate used in preferential trade between

appropriate. 3. Consignee ( Name , full address , country) (Optional)

as and bulk' *in ( Insert appropriate countries , groups of countries or territories )

state or 4. Country, group of countries 5. Country, group of countries or territory in which the or territory of destination articles products are considered as of originating

number 6. Transport details (Optional) 7. Remarks

indicate packed,

not are

goods If 1 ) ( 8. Item number; Marks and numbers ; Number and kind of packages ( 1 ); Description of goods 9. Gross 10. Invoices weight (kg) ( Optional) or other mea­ sure (litres, m3, etc.)

require.

territory or

country 11 . CUSTOMS ENDORSEMENT 12. DECLARATION BY THE EXPORTER Declaration certified exporting I, the undersigned , declare that the goods the Export document (2) described above meet the conditions required of for the issue of this certificate . Form No ... Customs office regulations Issuing country or territory .... Stamp the Place and date

where Date only

Complete (Signature) ( Signature) 2) (

13. REQUEST FOR VERIFICATION, to : 14. RESULT OF VERIFICATION,

Verification carried out shows that this certificate ( 1 ) was issued by the customs office indicated and that the information contained therein is accurate .

does not meet the requirements as to authenticity and accuracy (see remarks appended ). Verification of the authenticity and accuracy of this certificate is requested .

( Place and date ) ( Place and date )

Stamp Stamp

(Signature ) (Signature)

(') Insert X in the appropriate box .

NOTES

1 . Certificates must not contain erasures or words written over one another. Any alterations must be made by deleting the incorrect particulars and adding any necessary corrections . Any such alteration must be initialled by the person who completed the certifi­ cate and endorsed by the customs authorities of the issuing country or territory. 2. No spaces must be left between the items entered on the certificate and each item must be preceded by an item number. A horizontal line must be drawn immediately below the last item . Any unused space must be struck through in such a manner as to make any later additions impossible . 3 . Goods must be described in accordance with commercial practice and with sufficient detail to enable them to be identified .

APPLICATION FOR A MOVEMENT CERTIFICATE

1 . Exporter (Name , full address, country) EUR.1 No A 000.000

See note* overleaf before completing this form

2. Application for a certificate to be used in preferential trade appropriate. between

3. Consignee ( Name, full address, country) ( Optional)

as and bulk' 'in

( Insert appropriate countries , groups of countries or territories) state or 4. Country, group of countries 5. Country, group of countries or territory in which the or territory of destination articles of products are considered as originating

number 6. Transport details (Optional ) 7. Remarks

indicate packed,

not are

goods tf (') 9. Gross 10. Invoices 8. Item number; Marks and numbers ; Number and kind of packages (1 ) ; Description of goods weight (kg) ( Optional ) or other mea sure (litres, m3, etc.)

DECLARATION BY THE EXPORTER

I , the undersigned , exporter of the goods described overleaf,

DECLARE that the goods meet the conditions required for the issue of the attached certificate ;

SPECIFY as follows the circumstances which have enabled these goods to meet the above conditions :

SUBMIT the following supporting documents ( 1 ):

UNDERTAKE to Submit, at the request of the appropriate authorities, any supporting evidence which these authorities may require for the purpose of issuing the attached certificate, and undertake , if required , to agree to any inspection of my accounts and to any check on the processes of manufacture of the above goods , carried out by the said authorities ;

REQUEST the issue of the attached certificate for these goods.

( Place and date )

(Signature )

(') For example : import documents, movement certificates, invoices, manufacturer's declarations, etc., referring to the products used in manufacture or to the goods re-exported in the same state .

ANNEX VI

1 Form used in preferential trade FORM EUR.2 No between ( 1 ) and 2 Exporter ( Name , full address , country) 3 Declaration by exporter side. I , the undersigned , exporter of the goods described below, declare that the goods comply with the requirements for the completion of this form and that the goods have obtained the other status of originating products within the provisions governing the preferential trade shown in box 1 .

on 4 Consignee ( Name , full address , country)

5 Place and date instructions

the 6 Signature of exporter

carefully 7 Remarks 8 9 n Country of origin ( 3 ) Country of destination ( 4 )

read 10 Gross weight (kg) form 11 Marks ; Numbers of consignment ; Description of goods 12 Authority in the exporting country ( 4 ) this responsible for verification of the declara­ tion by the exporter

completing

Before

( 1 ) Insert the countries , groups of countries or territories concerned . (*) Refer to any verification already carried out by the appropriate authorities . (3) The term 'country of origin means country, group of countries or territory where the goods are considered to be originating . («) The term 'country' means country, group of countries or territory of destination .

13 Request for verification 14 Result of verification The verification of the declaration by the exporter on the front Verification carried out shows that (') of this form is requested (*) the statements and particulars given in this form are accurate . this form does not meet the requirements as to accuracy and authenticity ( see remarks appended )

19, 19 . ( Place and date ) ( Place and date )

Stamp Stamp

( Signature ) ( Signature )

( 1 ) Insert X in the appropriate box.

(*) Subsequent verifications of forms EUR . 2 shall be carried out at random or whenever the customs authorities of the importing State have reasonable doubt as to the accuracy of the information regarding the authenticity of the forms and the true origin of the goods in question .

instructions for the completion of form EUR . 2 1 . A form EUR . 2 may be made out only for goods which in the exporting country fulfil the conditions specified by the provisions governing the trade referred to in box 1 . These provisions must be studied carefully before the form is completed .

2. In the case of a consignment by parcel post the exporter attaches the form to the dispatch note. In the case of a consignment by letter post he encloses the form in a package. The reference ' EUR . 2' and the serial number of the form should be stated on the customs green label declaration C1 or on the customs declaration C2/CP3, as appropriate .

3. These instructions do not exempt the exporter from complying with any other formalities required by customs or postal regulations.

4. An exporter who uses this form is obliged to submit to the appropriate authorities any supporting evidence which they may require and to agree to any inspection by them of his accounts and of the processes of manufacture of the goods described in box 1 1 of this form .