In the microelectronics and related sectors
Avis juridique important
Council Regulation (EEC) No 3393/89 of 16 October 1989 temporarily suspending the autonomous common customs tariff duty on certain industrial products (in the microelectronics and related sectors) Official Journal L 332 , 16/11/1989 P. 0001 - 0064
I (Acts whose publication is obligatory) COUNCIL REGULATION (EEC) No 3393/89 of 16 October 1989 temporarily suspending the autonomous Common Customs Tariff duty on certain industrial products (in the microelectronics and related sectors)
THE COUNCIL OF THE EUROPEAN COMMUNITIES,
Having regard to the Treaty establishing the European Economic Community, and in particular Article 28 thereof,
Having regard to the proposal from the Commission,
Whereas production of the products referred to in this Regulation is at present inadequate or non-existent within the Community and producers are thus unable to meet the needs of user-industries in the Community;
Whereas it is in the Community's interest in certain cases to suspend the autonomous Common Customs Tariff duties only partially, particularly because of the existence of Community production, and in other cases to suspend them completely;
Whereas, taking account of the difficulties involved in accurately assessing the development of the economic
situation in the sectors concerned in the near future, these
suspension measures should be taken only temporarily, by
fixing their period of validity by reference to the interests of Community production,
HAS ADOPTED THIS REGULATION:
Article 1 The autonomous Common Customs Tariff duties for the products listed in the Annexes shall be suspended at the level indicated in respect of each of them.
These suspensions shall apply from:
- 1 January to 31 March 1990 for the product referred to in Annex I,
- 1 January to 30 June 1990 for the products referred to in Annex II.
Article 2 This Regulation shall enter into force on 1 January 1990.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Luxembourg, 16 October 1989.
For the Council
The President
M. DELEBARRE
ANNEX I
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 30
Electrically erasable, programmable read-only memories (so-called E²PROMs), in the form of an unmounted monolithic integrated circuit (chip) with a storage capacity of 16 Kbits, used in the manufacture of microwave systems for the identification of persons and objects (a)
0
(a) Control of the use for this special purpose shall be carried out pursuant to the relevant Community provisions.
ANNEX II
CN code
Description
Rate of
autonomous
duty
(%)
ex 8471 93 50
Floppy-disk storage units for the manufacture of products falling within headings 8469 or 8471 (a)
0
ex 8471 93 60
Digital audio tape storage unit for the manufacture of products falling within headings 8469 or 8471 (a)
0
ex 8471 99 90
Optical reader for reading alphanumerical dot-matrix printing characters and converting them into electrical signals, comprising a read head containing an optical detector, an amplifier, a focusing lens and two lamps, linked by one or two flat cables to a central module of which the dimensions do not exceed 200×220 mm, comprising a printed circuit board on which are mounted a microprocessor, an image recognition circuit and an analog-to-digital converter
0
ex 8473 10 00
Integrated memory unit for electronic typewriters, comprising a printed circuit with two or four static read/write random-access memories each with 8 K×8 bit capacity, electronic control components and memory back-up-batteries, contained in a cartridge fitted with connectors, of external dimensions not exceeding 11×40×90 mm, and bearing:
- an identification marking consisting of or including the following combination of letters:
MEMOCART
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8473 30 00
Ferrite magnetic heads of Winchester technology for disk file peripherals, as well as carrying arms equipped with such magnetic heads, capable of recording to a density of not less than 10 tracks per millimetre
0
ex 8473 30 00
Magnetic bubble memories with a storage capacity of not more than four megabits contained in a housing the exterior dimensions of which do not exceed 43×44 mm, with not more than 42 connecting pins or contact areas and bearing:
- an identification marking consisting of or including one of the following combinations of figures or figures and letters:
BDL 0133
MBM 2011
FBM 64 DA
BDL 0134
MBM 2256
7110
BDN 0151
FBM 54 DB
7114-1
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8473 30 00
Component forming the arithmetic/logic element of a central processing unit, comprising not more than nine printed circuit boards, the dimensions of which do not exceed 290×310 mm on each of which are mounted not more than 121 ECL gate arrays or ECL random access memories (ECL-RAMs) and combinations thereof contained in a framework the dimensions of which do not exceed 611×501×596 mm which serves as a housing and interconnector for the printed circuit boards, which bear:
- an identification marking consisting of or including one of the following combinations of figures and letters:
CO1B 2675 E 500
CO1B 2675 H 500
CO1B 2675 H 501
CO1B 2675 H 502
CO1B 2675 H 503
CO1B 2675 H 504
or
- other identification markings relating to devices complying with the abovementioned description
0
(a) Control of the use for this special purpose shall be carried out pursuant to the relevant Community provisions.
CN code
Description
Rate of
autonomous
duty
(%)
ex 8473 40 00
Thermal printer heads of thick or thin film technology consisting of a printed circuit with at least one tantalum capacitor and an electrolytic capacitor contained in a metal support with connector, printer element and heat sink, supplied with the appropriate support and transport roll
0
ex 8483 10 90
Integrally forged and roughly shaped generator and turbine shafts of a weight exceeding 215 tonnes
0
ex 8501 10 99
DC electric motor, brushless, with a torque of not more than 0,018 Nm, with coupling flange of a diameter of 35 mm and precision-made chuck of a diameter of 25 mm with internal motor, three-phase winding, rated speed of 3 600 rpm, supply voltage of 12 V ± 10 %
0
ex 8501 10 99
DC electric motor, brushless, with a torque of not more than 0,20 Nm, with coupling flange of a diameter of 74 mm, a spindle of a diameter of 40 mm, rated speed of 3 600 rpm, supply voltage of 12 V ± 10 %, with cables and connectors
0
ex 8501 10 99
DC electric motor, brushless, with a torque of not more than 0,20 Nm, with outside rotor of a maximum diameter of 55 mm, coupling flange of a diameter of 77 mm and precision-made chuck of a diameter of 44 mm, four-phase winding, rated speed of 3 600 rpm, supply voltage of 12 V ± 10 % and fitted with wires and connectors
0
ex 8501 10 99
Hybrid stepping motor with an angle of step of 1,8°, 200 steps per revolution, a four-phase rotation cycle with single-pole windings, comprising a rotor and a laminated stator enclosed between two square section flanges with sides not exceeding 42 mm and fitted with biterminate shaft and wires and connectors
0
ex 8501 10 99
Hybrid stepping motor with an angle of step of 0,9°, 400 steps per revolution, two- or four-phase rotation sequence and bipolar windings, comprising a rotor and a laminated stator enclosed between two square section flanges with sides not more than 40 mm wide and fitted with biterminate shaft, wires and connectors
0
ex 8501 10 99
Hybrid stepping motor with an angle of step of 0,9°, 400 steps per revolution, two-phase rotation sequence and bipolar windings, comprising a rotor and a stator encapsulated in a cylindrical housing with a maximum diameter of 47 mm and maximum thickness of 14 mm, fitted with a single shaft output and cables with connectors
0
ex 8501 10 99
Hybrid stepping motor with an angle of step of 0,9°, 400 steps per revolution and two-phase rotation sequence, and bipolar windings, comprising a rotor, a laminated stator enclosed between two square section flanges with sides not exceeding 40 mm, an integral 2- or 3-phase tachometer enclosed in a cap with a maximum diameter of 35 mm, and separate cables and connectors for the motor and tachometer outputs, with maximum dimensions of 40×40×62 mm, including the shaft
0
ex 8501 10 99
Hybrid stepping motor with an angle of step of 0,9°, 400 steps per revolution and two-phase rotation sequence with bipolar winding, comprising a rotor, a laminated stator enclosed between two flanges, one of square section with a side of 40 mm maximum, the other front face having a shaped profile with two projections with fixing slots, an integral two- or three-phase tachometer enclosed in a cover of diameter of 35 mm maximum, separate cables and connectors for the motor and tachometer outputs, with overall dimensions not exceeding 40×40×62 mm, including the shaft but excluding the projections of the front flange
0
ex 8501 10 99
Direct-current bipolar stepping motor with a single stator, an output of not more than 37,5 W, a rotary angle/step of 180°, two steps per rotation, a two-phase rotation cycle with single-pole winding, an output torque of not less than 0,1×10-6 Nm and not more than 0,1×10-4 Nm and a supply voltage of not more than 3 V
0
ex 8504 40 99
Static converter consisting of a combination of seven diodes in cascade, for output voltages of not less than 40 kV DC with a load current of not less than 3 mA
0
ex 8506 19 10
Lithium iodine single cell battery with dimensions not exceeding 45×9×23 mm and a voltage not exceeding 2,8 V
0
CN code
Description
Rate of
autonomous
duty
(%)
ex 8506 19 10
Unit consisting of not more than two lithium batteries embedded in a socket for integrated circuits (battery-buffered socket), with not more than 28 connecting pins and incorporating a control circuit
0
ex 8506 19 90
Dry zinc/carbon batteries of a voltage of not less than 5,5 V and not more than 6,5 V and of a size not exceeding 110×90×5 mm, for incorporation in film cassettes for instant pictures (a)
0
ex 8517 90 91
Assembly for telephonic apparatus consisting of a microphone, protecting circuit and four-way connecting socket, mounted on a printed circuit, with dimensions not exceeding 22×40 mm
0
ex 8523 20 10
Rigid magnetic disks, prelubricated, oxide type, with a coercivity of 300 Oe or more
0
ex 8523 20 10
Rigid magnetic disk with a thin-film metallic coating, having a coercivity of more than 600 Oe, an external diameter of 88 mm or more but not exceeding 231 mm
0
ex 8529 10 70
Ceramic filters for frequencies not less than 4,5 and not exceeding 6,6 MHz contained in a housing, the dimensions of which do not exceed 9×24 mm
0
ex 8529 10 70
Ceramic filter package comprising two ceramic filters with three connecting pins and one ceramic resonator with two connecting pins, each having a frequency of 10,7 MHz ± 30 kHz, contained in a housing the exterior dimensions of which do not exceed 10×10 mm
0
ex 8529 90 99
Interline charge-coupled image sensor with filter, the dimensions of which do not exceed
43×89 mm
0
ex 8531 20 90
Liquid crystal display (LCD), the exterior dimensions of which do not exceed 11×28×88 mm, apart from cables and plugs, consisting of a layer of liquid crystals between two glass plates, with 121 display dots (arranged in 16×7 dots and nine symbols), mounted on a printed circuit board comprising electronic components providing drive and control functions with not more than nine connecting pins
0
ex 8531 20 90
Dot-matrix LCD display with symbols, the exterior dimensions of which do not exceed 18×35×117 mm, apart from cables and plugs, consisting of a layer of liquid crystal between two glass plates with 423 display dots (arranged in 60 columns and 7 rows with three symbols), mounted on a printed circuit board with interface electronics of C-MOS technology, plus a backlight function and not more than 16 connecting wires with contact areas
0
ex 8531 20 90
Dot-matrix displays, whose external dimensions do not exceed 15×62×276 mm excluding cables and connectors, consisting of a layer of liquid crystals between two glass sheets or plates with 32 768 dots (arranged in 64 lines and 512 columns), mounted on a printed-circuit board comprising electronic components providing drive and control functions, with or without cable and connector
0
ex 8532 29 00
Gold capacitor with a rated capacitance of 100 mF, an operating voltage of 5,5 V and a leakage current of not more than 100 mA, contained in a cylindrical housing of a height of less than 8 mm and a diameter of not more than 14 mm
0
ex 8532 30 10
Variable plate capacitor with plastic dielectric, with a capacitance of not more than 2×355 pF for the AM section and not more than 2×20 pF for the FM section, contained in a housing the exterior dimensions of which do not exceed 21×24 mm
0
ex 8532 30 90
Adjustable capacitor, in the form of a circular plate with a diameter of not more than 2,5 mm, fitted with a screw head in its centre and two connecting tags, of a thickness not exceeding 3 mm and a capacity of from 5 to 30 pF, for the manufacture of products falling within Chapter 91 (a)
0
(a) Control of the use for this special purpose shall be carried out pursuant to the relevant Community provisions.
CN code
Description
Rate of
autonomous
duty
(%)
ex 8533 29 00
Device consisting of fixed resistors with a positive temperature coefficient having a nominal resistance in DC of 19,6 O at 20 °C, an insulation resistance of more than 1 MO, for the protection of telephone exchanges against prolonged increases in voltage of not more than 1 000 V, contained in a housing the exterior dimensions of which do not exceed 48×19 mm, with not more than 16 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures:
20793
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8533 40 10
Slide potentiometer with one or two resistor tracks and a slide distance of 20 mm, contained in a housing with not more than eight connecting pins
0
ex 8534 00 11
ex 8534 00 19
Single-face printed circuit, of dimensions not exceeding 30×30 mm, for the manufacture of products falling within Chapter 91 (a)
0
ex 8535 90 00
ex 8540 91 00
Socket for cathode-ray tubes
0
ex 8536 41 10
ex 8536 41 90
ex 8536 49 00
Thermal relays contained in a hermetically sealed glass cartridge not exceeding 35 mm in length excluding wires, with a maximum leakage rate of 10-( cm= He/sec at one bar in the temperature range 0 to 160 °C, to be incorporated into compressors for refrigerating equipment (a)
0
ex 8536 50 00
Telephone line switch assembly consisting of one moveable and one stationary bifurcated spring with contact area of diffused gold on palladium silver inlay, mounted in polycarbonate material, and of dimensions not exceeding 40×20×13 mm
0
ex 8536 50 00
Reed switches in the form of a glass capsule containing not more than three electrical contacts on metal arms and a small quantity of mercury
0
ex 8540 11 10
Colour cathode-ray tubes with a slit mask, equipped with electron guns placed side by side (in-line technology) with a distance between stripes of the same colour not exceeding 0,47 mm and having the following characteristics:
- a diagonal screen measurement not less than 12 and not more than 16 cm
- a diagonal angle of deflection not exceeding 55°
8
ex 8540 11 10
Colour cathode-ray tubes with a slit mask, equipped with electron guns placed side by side (in-line technology) with a distance between stripes of the same colour of not more than 0,47 mm and having the following characteristics:
- a diagonal screen measurement not less than 22 and not more than 26 cm
- a diagonal angle of deflection of not more than 76°
- a phosphor layer calibrated with the following nominal coordinates for the colour dots:
red
green
blue
X
0,610
0,298
0,151
Y
0,342
0,588
0,064
0
ex 8540 20 90
Photomultiplier consisting of a photocathode tube with nine dynodes, for light of wavelength of 160 nm or more but not exceeding 930 nm, of a diameter not exceeding 14 mm and a height not exceeding 94 mm
0
ex 8540 30 10
Colour cathode-ray rubes with a dot mask, equipped with electron guns placed side by side (in-line technology), with a distance of less than 0,45 mm between colour dots and with at least one of the following characteristics:
- a diagonal screen measurement of not less than 42 cm, a diagonal angle of deflection of not more than 90° and convergence errors exceeding 0,8 mm at the corners
- a built-in system, inseparably linked to the tube, for the absorption of vibration (so called potting system)
- without internal magnetic screen
- a phosphor layer calibrated with the following nominal coordinates for the colour dots:
(a) Control of the use for this special purpose shall be carried out pursuant to the relevant Community provisions.
CN code
Description
Rate of
autonomous
duty
(%)
ex 8540 30 10
(cont'd)
red
green
blue
X
0,64
0,29
0,15
Y
0,33
0,60
0,06
or
X
0,64
0,31
0,155
Y
0,34
0,595
0,07
or
X
0,62
0,21
0,15
Y
0,33
0,615
0,06
or
X
0,610
0,307
0,150
Y
0,350
0,595
0,065
or
X
0,61
0,205
0,15
Y
0,35
0,680
0,065
or
X
0,62
0,29
0,15
Y
0,35
0,60
0,065
0
ex 8540 30 10
Colour cathode-ray tubes with a dot mask equipped with electron guns in a triangular fashion (delta technology) with a distance of less than 0,65 mm between colour dots and with at least one of the following characteristics:
- a diagonal screen measurement of at least 66 cm
- equipped with a phosphor layer calibrated with the following nominal coordinates for the colour dots:
red
green
blue
X
0,64
0,29
0,15
Y
0,33
0,60
0,06
or
X
0,64
0,31
0,155
Y
0,34
0,595
0,07
or
X
0,610
0,307
0,150
Y
0,350
0,595
0,065
or
X
0,61
0,205
0,15
Y
0,35
0,680
0,065
or
X
0,62
0,29
0,15
Y
0,35
0,60
0,065
0
ex 8540 30 10
ex 8540 30 90
Cathode-ray tubes with a memory (direct view storage tubes) for the reproduction of alphanumeric and analog data, equipped with a scanning device, for reading the images
0
ex 8540 30 90
Flat screen monochrome cathode-ray tubes having a diagonal screen measurement of not less than 142 mm and not more than 145 mm, a luminescence of between 300 and 400 lumen, a resolution of between 0,06 and 0,1 mm, phosphor types P 1 or P 55 or P 56, an anode voltage of more than 34 kV, a focus voltage of more than 7 kV and a cathode current of not less than 3 mA
0
ex 8540 89 11
Displays in the form of a tube consisting of a glass housing mounted on a board the dimensions of which do not exceed 350×300 mm excluding leads. The tube contains one or more rows of characters or lines arranged in rows, each character or line consisting of fluorescent or phosphorescent elements. These elements are mounted on a metallized base which is covered with fluorescent substances or phosphorescent salts which give off light when bombarded with electrons
0
ex 8540 91 00
Tungsten elements coated with insulating material, grids and cathodes for use in the manufacture of electron guns for monochrome cathode-ray tubes (a)
0
(a) Control of the use for this special purpose shall be carried out pursuant to the relevant Community provisions.
CN code
Description
Rate of
autonomous
duty
(%)
ex 8540 91 00
Electron gun for the production of monochrome cathode-ray tubes with diagonal screen measurement of not less than 7,6 and not more than 30,5 cm (a)
0
ex 8540 91 00
Deflector yoke for cathode-ray tubes with an operating frequency of between 31 250 Hz and 64 000 Hz incorporating a quadripolar magnet
0
ex 8541 10 91
Silicon power rectifier diodes of planar technology, with a recovery time of less than 100 ns, a maximum recurring reverse voltage of 200 V, and average conducting-state current of 2,5 A, or more, contained in a flat housing the exterior dimensions of which exceed 9×9×5 mm, but do not exceed 17×11×5 mm
0
ex 8541 10 99
Germanium-gold diodes with forward voltage not exceeding 1 V at 5 mA
0
ex 8541 29 90
Transistor with a power of not less than 150 W at a voltage of not less than 160 V and with a cut-off frequency of not less than 20 MHz, contained in a housing the exterior dimensions of which do not exceed 37×22 mm, with not more than three connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
2 SA 1170 2 SC 2774
2 SA 1215 2 SC 2921
2 SA 1494 2 SC 3858
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8541 40 10
Light-emitting diode (LED) made from a gallium-based semiconductor compound, mounted in a rectangular housing the exterior dimensions of which do not exceed 4×20×21 mm, with two connecting pins, and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
LT 9305 SLF 209
LT 9306 SLF 909
or
- other identification markings relating to devices complying with the abovementioned description, for use in the manufacture of radio broadcast receivers and sound recorders or reproducers (a)
0
ex 8541 40 10
Assembly consisting of not more than 10 light-emitting diodes (LEDs) made from a gallium-based semiconductor compound, mounted in a rectangular housing the exterior dimensions of which do not exceed 68×25×4 mm, with not more than 20 connecting pins, and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
LT 9355
or
- other identification markings relating to devices complying with the abovementioned description, for use in the manufacture of radio broadcast receivers and sound recorders or reproducers (a)
0
ex 8541 40 10
ex 8541 40 93
Laser diode with one photodiode, emitting light of a nominal wavelength of 780 nm, contained in a housing having a diameter of not more than 10 mm and a height of not more than 9 mm, with not more than 10 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
LT 022 LDGU
or
- other identification markings relating to devices complying with the abovementioned description
0
(a) Control of the use for this special purpose shall be carried out pursuant to the relevant Community provisions.
CN code
Description
Rate of
autonomous
duty
(%)
ex 8541 40 10
ex 8542 20 90
Digital display of a size not exceeding 25×35 mm, consisting of a printed circuit board on which are mounted, under a plastic cover, up to 22 light-emitting diodes manufactured from gallium-based semiconductor compounds. Each display consists of a single character with or without a plus or minus sign and/or one or two dots
7
ex 8541 40 10
ex 8542 20 90
Digital displays, consisting of a printed circuit board of a size not exceeding 35×90 mm with a single line of characters, not less than three in number, comprising light-emitting diodes made from gallium-based semiconductor compounds mounted thereon. Each character is composed of up to eight segments with or without a decimal point and the line of characters has a protective cover of plastic
0
ex 8541 40 91
Module of not more than five solar cells of thin-film technology, on a substrate the exterior dimensions of which do not exceed 70×18 mm
0
ex 8541 40 93
Opto-electronic circuit consisting of one or more light-emitting diodes and one or more photodiodes with amplifier circuit, contained in a plastic housing with not more than 16 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
HC PL 2400
HC PL 5700
HC PL 5730
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8541 60 00
Quartz crystal oscillating at a frequency of 32 768 Hz, contained in a cylindrical housing of a length not exceeding 8,2 mm and a diameter not exceeding 3,2 mm, for the manufacture of products falling within Chapter 91 (a)
0
ex 8541 60 00
Polarized ceramic piezo-electric crystals oscillating in a frequency range of not less than 500 and not more than 12 500 kHz, contained in a housing the exterior dimensions of which do not exceed
14×15 mm, with not more than three connecting pins
0
ex 8542 11 30
Control and driver circuit for dot-matrix liquid crystal displays, of C-MOS technology, with a character generator, and having a drive voltage of more than 10 V, in the form of a monolithic integrated circuit without a housing (microchip) for the manufacture of liquid crystal display modules (a)
0
ex 8542 11 30
Driver circuit for liquid crystal displays, of C-MOS technology, with 40 or more output channels, and having a drive voltage of more than 10 V, in the form of a monolithic integrated circuit without a housing (chips), for the manufacture of liquid crystal display modules (a)
0
ex 8542 11 41
Dynamic read/write random-access memory of N-MOS (including H-MOS) technology (N/H-MOS D-RAM) with a storage capacity of 64 Kbit, in the form of a monolithic integrated circuit, contained
in a housing the exterior dimensions of which do not exceed 22×7 mm, with not more than
18 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
KM 4164
MN 4264
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 41
Dynamic random-access memories of C-MOS technology (C-MOS D-RAMs), with a storage capacity of 256 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 28 connecting pins and bearing:
(a) Control of the use for this special purpose shall be carried out pursuant to therelevant Community provisions.
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 41
(cont'd)
- an identification marking consisting of or including one of the following combinations of figures and letters:
51 C 256 53 C 256 53 C 464 MB 81 C 258 TC 51832
51 C 259
53 C 258
53 C 466
MB 81 C 446
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 41
Dynamic random-access memories (D-RAMs) of N-MOS (including H-MOS) technology, with a storage capacity of 256 Kbits and an access time not exceeding 150 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×34 mm, with not more than 24 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
HB 50562
HM 50256 PD 41254 M5M 4256
HM 50464
PD 41256
M5M 4464
PD 41464
MB 81256
MB 81464
TMM 41256
TMM 41464
MSM 4256
TMS 4256
MSM 4464
TMS 4464
or
- other identification markings relating to devices complying with the abovementioned description
8
ex 8542 11 41
Dual port dynamic random-access memory (D-RAM) of MOS technology, with data registers and a serial read output control, with a storage capacity of 256 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 13×39 mm, with not more than 24 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
MB 81461 M5M 4 C 264
PD 41264
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 41
ex 8542 11 43
Dynamic read/write random-access memories manufactured in N-MOS (including H-MOS) technology (D-RAMs), consisting of a substrate layer with not less than two and not more than eight chips having a storage capacity of 128, 192 or 256 Kbits and a storage capacity of not less than 256 Kbits and not more than two megabits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30×30 mm, with not more than 57 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures:
6025841
6031587
6870392
7379172
6025843
6031591
6870393
7379174
6025856
6870395
7379176
6025858
7379181
or
- other identification markings relating to devices complying with the abovementioned description
0
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 43
Random-access memory with a storage capacity of 1 Mbit, with separate in- and outputs and serial shift registers (so-called field memories), of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×54 mm, with not more than 40 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
TC 521 000
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 43
Dual port dynamic random-access memory (D-RAM) of MOS technology, with data registers and a serial read output control, with a storage capacity of 1 Mbit in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 13×37 mm, with not more than 32 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
TC 524256 MB 81 C 4251 TMS 44 C 251
TC 524257
MSM 442256
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 51
Static random-access memories of C-MOS technology (C-MOS S-RAMs), in the form of a monolithic integrated circuit with a storage capacity of 16×4 bits, an access time not exceeding 35 ns, contained in a housing the exterior dimensions of which do not exceed 9×21 mm, with not more than 16 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
CY7C189
CY7C190
CY74S189
CY54S189
CY27S03
CY27S07
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 51
Static random-access memories of bipolar technology (bipolar S-RAMs), with a storage capacity of 64×9 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×40 mm, with not more than 28 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
82 S 09
MBM 93419
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 51
Static random-access memory (S-RAM) with a storage capacity of 256 bits superimposed bit-for-bit on an electrically erasable, programmable, read-only-memory (E²PROM), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 8×24 mm, with not more than 18 connecting pins and bearing:
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 51
(cont'd)
- an identification marking consisting of or including one of the following combinations of figures and letters:
X 2210
X 2443
X 2444
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 51
Static random-access memories of C-MOS technology (C-MOS S-RAMs), with a storage capacity of 256×4 bits and an access time not exceeding 60 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 12×29 mm, with not more than 22 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
CY7C122
CY 93422
CY93L422
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 51
Static random-access memories of N-MOS (including H-MOS) technology (N-MOS S-RAMs), with a storage capacity of 256×4 bits with an access time not exceeding 25 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 24 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
9122 - 25
91 L 22 - 25
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 51
Random-access memories of ECL technology (ECL-RAMs) with a storage capacity of 256×4 bits, and the access time not exceeding 8 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 11×32 mm, with not more than 24 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures:
10422
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 51
Static random-access memories of TTL technology (TTL S-RAMs), with a storage capacity of 1 Kbit and an access time not exceeding 45 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×30 mm, with not more than 22 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures:
93422
93425
or
- other identification markings relating to devices complying with the abovementioned description
0
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 51
Static random-access memory (S-RAM) with a storage capacity of 1 Kbit, superimposed bit-for-bit on an electrically erasable, programmable, read-only memory (E²PROM), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×33 mm, with not more than 24 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
X 2001
X 2201 A
X 2212
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 51
Static random-access memory (S-RAM) with a storage capacity of 2 Kbits, superimposed bit-for-bit on an electrically erasable, programmable, read-only memory (E²PROM), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 28 connecting pins and bearing:
- an identification marking consisting of the following combination of figures and letters:
X 2002
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 51
Static random-access memories (S-RAMs) of MOS technology, with a storage capacity of 1 K×4 bits and access time not exceeding 25 ns, in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 8×32 mm, with not less than 24 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
AM 9150-20 CY 7 C 150-15
AM 9150-25 CY 7 C 150-25
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 51
Random-access memories of ECL technology (ECL-RAMs) with a storage capacity of 4 Kbits and an access time not exceeding 50 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 11×32 mm, with not more than 24 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures:
10470
10474
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 51
Static random-access memory (S-RAM) with a storage capacity of 4 Kbits, superimposed bit-for-bit on an electrically erasable, programmable, read-only memory (E²PROM), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 28 connecting pins and bearing:
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 51
(cont'd)
- an identification marking consisting of the following combination of figures and letters:
X 2004
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 51
Static random-access memories of N-MOS (including H-MOS) technology (N-MOS S-RAMs), with a storage capacity of 8 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 24 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
4008 8112
4118 8114
4801 8185
8104 PD 421
8108
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 51
Static random-access memory of C-MOS technology (C-MOS S-RAM), with a storage capacity of 2 K×8 bits and with a nominal standby power of not more than 0,005 mW at 25 °C, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×33 mm with not more than 24 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
TC5516APL-2 TC5517CPL-15 TC5517BPL-20
TC5516AFL-2
TC5517CPL-20
TC5517BPL-25
TC5516APL
TC5517CFL-15
TC5517BFL-20
TC65516AFL
TC5517CFL-20
TC5517BFL-25
or
- other identification markings relating to devices complying with the abovementioned description
7
ex 8542 11 51
Non-volatile memory consisting of a C-MOS S-RAM, with a capacity of 16 Kbits and internal power supply, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 19×40 mm, with notmore than 28 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
DS 1220 Y
MK 48 Z 02 (B)
or
- other identification markings relating to devices complying with the abovementioned description
7
ex 8542 11 51
Random-access memories of ECL technology (ECL-RAMs) with a storage capacity of 16 Kbits and an access time not exceeding 15 ns in the form of a monolithic integrated circuit, contained in a housing the dimensions of which do not exceed 18×37 mm, with not more than 28 connecting pins or contact areas and bearing:
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 51
(cont'd)
- an identification marking consisting of or including one of the following combinations of figures:
10480
10484
100484
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 51
Static random-access memory of C-MOS technology (C-MOS S-RAM), with a storage capacity of
32 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18×39 mm, with not more than 28 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
TC 5532
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 51
Non-volatile memory consisting of a static read/write random access memory of C-MOS technology (C-MOS S-RAM), with a storage capacity of 64 Kbits and an internal energy source, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 20×42 mm, with not more than 28 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
DS 1225 Y
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 51
Random-access memories of ECL technology (ECL-RAMs) with a storage capacity of 64 Kbits in the form of a monolithic integrated circuit, contained in a housing the dimensions of which do not exceed 10×29 mm, with not more than 22 connecting pins or contact areas and bearing:
- an identification marking consisting of or including the following combination of figures:
10490
or
- other identification markings relating to devices, complying with the abovementioned description
0
ex 8542 11 52
Static read/write random-access memories of N-MOS (including H-MOS) technology (N-MOS S-RAMs), with a storage capacity of 72 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 10×39 mm, with not more than 28 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
TMM 2089
or
- other identification markings relating to devices complying with the abovementioned description
0
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 52
Static random access memories (S-RAMs) of C-MOS technology, with a storage capacity of
32K×8 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 39×17 mm, with not more than 32 connecting pins or contact areas and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
HM 62256, PD 43256, TC 55257, MB 84256
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 52
Non-volatile memory consisting of a static C-MOS random-access memory, with a storage capacity of 256 Kbits and built-in energy source, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 19×40 mm, with not more than 28 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
DS 1230 DS 1235
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 61
Read-only memory in C-MOS technology (C-MOS ROM) with a storage capacity of 256 Kbits and a standby current of not more than 0,03 mA, in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 17×50 mm, with not more than 54 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
HN 61256
HN 613256
MB 83256
or
- other identification markings relating to devices complying with the abovementioned description
7
ex 8542 11 61
Read-only memory in C-MOS technology (C-MOS ROM) with a storage capacity of 1 Mbit, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 28 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
HN 62301 P
MB 83 1000
MB 83 1124
TC 53 1000 P
or
- other identification markings relating to devices complying with the abovementioned description
7
ex 8542 11 63
UV-erasable, programmable, read-only memories (EPROMs) with a storage capacity of 2 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with a quartz window on the upper surface and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
82140 PP
AMI 702 ADC
or
- other identification markings relating to EPROMs complying with the abovementioned description
4
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 63
UV-erasable, programmable, read-only memory (EPROM) equipped with a programmable input/output system, with a storage capacity of 2 K×8 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×52 mm, with a quartz window on the upper face and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
D 8755 A
TMP 8755 AC
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 63
UV-erasable programmable read-only memory (EPROM) having a storage capacity of 16 Kbits and an access time of not more than 65 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with a quartz window on its upper surface, and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
CY 245 W
CY 7C 291 W
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 63
UV-erasable programmable read-only memory (EPROM) having a storage capacity of 64 Kbits and an access time of not more than 65 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with a quartz window on its upper surface, and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
CY 7C 261 W
CY 7C 263 W
CY 7C 268 W
CY 7C 269 W
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 63
ex 8542 11 76
Programmable read-only memories, erasable (EPROMs) or non-erasable (PROMs), in the form of a monolithic integrated circuit having a storage capacity of 128 Kbits and an access time of not more than
100 ns, contained in a housing whose external dimensions do not exceed 17×39 mm, with not more than 32 connecting pins or contact areas, with or without a quartz window on the upper surface and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
CY 7C 251
CY 7C 254
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 63
ex 8542 11 76
Programmable read-only memories, erasable (EPROMs) or non-erasable (PROMs), in the form of a monolithic integrated circuit having a storage capacity of 256 Kbits and an access time of not more than 100 ns, contained in a housing whose external dimensions do not exceed 17×39 mm, with not more than 32 connecting pins or contact areas, with or without a quartz window on the upper surface and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
CY 7C 271
or
- other identification markings relating to devices complying with the abovementioned description
0
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 72
Electrically erasable, programmable, read-only memories (E$PROMs) with a storage capacity of 16 Kbits, in the form of a monolithic circuit, contained in a housing the exterior dimensions of which do not exceed 17×42 mm, with not more than 32 connecting pins or contact areas and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
AM 2817 24 C 16 X 2816 28 C 16 28 C 17 38 C 16 52 B 13
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 72
Electrically erasable, programmable, read-only memories (E$PROMs) with a storage capacity of 64 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 32 connecting pins or contact areas and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
28 C 64
52 B 33
52 B 33 H
MBM 28 C 65
MCM 2864
X 2864 A
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 72
Electrically erasable, programmable, read-only memories (E$PROMs) with a storage capacity of 128 Kbits, in the form of a monolithic circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 32 connecting pins or contact areas and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
X 28128 A
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 72
Electrically erasable, programmable, read-only memories (E²PROMs) with a storage capacity of 256 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×42 mm, with not more than 32 connecting pins or contact areas and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
28256
28 C 256
48 C 256
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 72
Electrically erasable, programmable, read-only memories (E²PROMs) with a storage capacity of 512 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×42 mm, with not more than 32 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
48 F 512
or
- other identification markings relating to devices complying with the abovementioned description
0
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 72
Electrically erasable, programmable, read-only memories (E²PROMs) with a storage capacity of 1 Mbit, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×42 mm, with not more than 32 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
48 F 010
or
- an identification markings relating to devices covered by the abovementioned description
0
ex 8542 11 76
Write buffer memory, of C-MOS technology, with an organization of 4×16 bits comprising eight bits of address and eight bits of data, and four-bit parity in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 31×31 mm, with not more than 68 connecting pins, and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
R 2020/16
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 76
Double row buffer memory, with shift registers and random-access read/write memories, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 28 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
CRT 9212
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 76
Dynamic FIFO (first-in, first-out) read/write memory of TTL technology with a storage capacity of 256 bits in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 7×20 mm, with not more than 16 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
67 L 401
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 76
Dynamic FIFO (first in, first out) read/write memory, of MOS technology, with a storage capacity of 7 280 or 9 080 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 12×36 mm, with not more than 28 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
PD 41101 PD 42 101
PD 41102 PD 42 102
or
- other identification markings relating to devices complyingwith the abovementioned description
0
ex 8542 11 76
Programmable, non-erasable, read-only memories (PROMs) of Schottky TTL technology, with a storage capacity of 2 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 24 connecting pins or contact areas, and bearing:
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 76
(cont'd)
- an identification marking consisting of or including one of the following combinations of figures or figures and letters:
27 S 12
5305
6305
76 LS 03
27 S 13
5306
6306
7620
5308
6308
7621
28 L 22
5309
6309
28 LA 22
53 S 240
63 S 240
82 S 114
28 L 2 XMFC
53 S 241
63 S 241
82 S 130
6335
82 S 131
29613
54 S 570
6336
29770
54 S 571
93436
29771
7053
93446
5604
7058
38510
5624
MB 7115
74 S 570
MB 7116
74 S 571
MB 7117
MB 7118
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 76
Programmable non-erasable read-only memories (PROMs) of MOS technology, with a storage capacity of 16 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 39×17 mm, with not more than 32 connecting pins or contact areas and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
7 C 245
7 C 291
7 C 292
HM 6616
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 76
Programmable non-erasable read-only memories (PROMs) of bipolar technology with a storage capacity of 16 Kbits and a standby current equal to, or of more than, 50 mA and less than, or equal to, 80 mA in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 33×14 mm, with not more than 24 connecting pins or contact areas and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
27 PS 191 A
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 76
Programmable non-erasable read-only memories (PROMs) with a storage capacity of 32 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 32 connecting pins or contact areas and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
63 S 3281
AM 27 S 43
MB 7141
MB 7142
or
- other identification markings relating to devices complying with the abovementioned description
0
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 76
Programmable non-erasable read-only memory (PROM) having a storage capacity of 64 Kbits and an access time of not more than 65 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×44 mm, with not more than 32 connecting pins or contact areas and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
CY 7C 261 MB 7143
CY 7C 263 MB 7144
CY 7C 264 MB 71 C 44
CY 7C 268
CY 7C 269
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 81
4-bit single-chip microcomputers of C-MOS technology, having driver-functions for liquid crystal displays (LCD), consisting of a read-only memory (ROM) with a capacity of 12 Kbits and a random-access memory (RAM) with a capacity of 160 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 14×18 mm, with not more than 60 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
MBM 58421
or
- other identifications marking relating to devices complying with the abovementioned description
0
ex 8542 11 81
Single-chip microcomputer of C-MOS technology, consisting of an arithmetical logic unit (ALU) with an organization of four bits, a read-only memory (ROM) with a storage capacity of 2 K × 8 bits, a dual-tone, multi-frequency (DTMF) generator, a random access memory (RAM) with a storage capacity of 1 Kbit, whether or not with another random access memory (RAM) with a storage capacity of 512 bits, in the form of a monolithic integrated circuit, contained in a housing the external dimensions of which do not exceed 16×54 mm, with not more than 42 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
T 6978
TCM 8301
TCM 8302
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 81
4-bit single-chip microcomputers of C-MOS technology, consisting of a read-only memory (ROM) with a capacity of not less than 10 Kbits and not more than 16 Kbits and a random-access memory (RAM) with a capacity of not more than 1 536 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×54 mm, with not more than 67 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
TMP 47 C 200 HD 44750
TMP 47 C 220
TMP 47 C 221
or
- other identification markings relating to devices complying with the abovementioned description
0
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 81
4-bit single-chip microcomputers of C-MOS technology, consisting of a read-only memory (ROM) with a capacity of 4 K×8 bits, random-access memories (RAM) with a total capacity of 3 Kbits, a DMTF-generator, in the form of a monolithic integrated circuit contianed in a housing the exterior dimensions of which do not exceed 16×54 mm, with not more than 42 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
TMP 47 C 452
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 81
4-bit single-chip microcomputers consisting of a read-only memory (ROM) with a capacity of not less than 18 Kbits and not more than 104 Kbits and a random-access memory (RAM) with a capacity of not less than 512 bits and not more than 4 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 20×60 mm, with not more than 100 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
CD 3200-3299 TP 0310-03299 HD 38800 HD 404 189 SMC 6214
TP 0450-04599
HD 38820
HD 614 080
SMC 6215
TMC 0270-0279
TP 0480-04899
HD 44796
SMC 6234
TMC 0500-0599
TP 0500-05999
HD 44800
SMC 6266
TMC 0980-0989
T 7767 BS
HD 44801
SMC 62 L 34
TMC 1500-1599
HD 44820
TMC 1980-1999
TSS 200
HD 44840
TMP 47 C 670
TSS 400
HD 44860
HD 614042
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 81
4-bit single-chip microcomputer of C-MOS technology, in the form of a monolithic integrated circuit, comprising a read-only memory (ROM) or a programmable non-erasable read-only memory (PROM) with a storage capacity of 160 Kbits or more and a read/write random access memory (RAM) with a storage capacity not exceeding 4 Kbits, contained in a housing the exterior dimensions of which do not exceed 20×60 mm, with not more than 64 connecting pins and bearing:
- an identification code consisting of or including one of the following alphanumeric combinations:
HD 404019 HD 404919 HD 40 74019
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 81
8-bit single-chip microcomputer of MOS technology, having universal peripheral interface functions, consisting of a central processing unit, a random access read-write memory (RAM) with a storage capacity of 1 Kbit, UV-erasable, programmable read-only memory (EPROM) with a storage capacity of 2 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×53 mm, having a quartz window on the upper face, with not more than 44 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
D 8742
or
- other identification markings relating to devices complying with the abovementioned description
0
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 81
8-bit single-chip microcomputer, consisting of an electronic, programmable, read-only memory (EPROM) UV-erasable with a capacity of 32 Kbits and a random access memory (RAM) with a capacity of 1 Kbit, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×53 mm, with a quartz window and not more than 40 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures:
7742
8751
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 81
8-bit single-chip microcomputer of C-MOS technology in the form of a monolithic integrated circuit consisting of a read-only memory (ROM) with a capacity of 16 Kbits, a random access memory (RAM) with a capacity of not more than 2 Kbits, an electrically erasable programmable read-only memory (E²PROM) with a capacity of 640 bits, 8-bit two-way converters (ADC/DAC), an analog multiplexer, and programmable amplifiers for analog signal control, contained in a housing the exterior dimensions of which do not exceed 26×20 mm, with not more than 100 connecting pins and bearing:
- an identification marking either consisting of or including the following combination of letters:
DAPC
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 81
8-bit single-chip microcomputer of N-MOS (including H-MOS) technology, having universal peripheral interface functions, consisting of a random access read-write memory (RAM) with a storage capacity of 2 Kbits, a non-erasable, programmable read-only memory (PROM) or a UV-erasable, programmable read-only memory (EPROM) with a storage capacity of 16 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×53 mm, with not more than 44 connecting pins or 44 contact areas and bearing:
- an identification marking consisting of or including one of the following combinations of figures:
8042
8742
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 81
8-bit single-chip microcomputer of C-MOS technology consisting of a random access memory (RAM) with a storage capacity of 2 Kbits, a programmable read-only memory (PROM) or a UV-erasable programmable read-only memory (EPROM) with a storage capacity of 64 Kbits and a multi-protocol serial communication port, in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 63×52 mm, with not more than 68 connecting pins or contact areas and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
80 C 152 77 C 82
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 81
8-bit microprocessor of N-MOS (including H-MOS) technology, for the encoding/decoding of data in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 53×15 mm, with not more than 40 connecting pins and bearing:
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 81
(cont'd)
- an identification marking consisting of or including one of the following combinations of figures and letters:
Z 8068 8294
Z 9518
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 81
8-bit microprocessor of C-MOS technology, consisting of a central processing unit (CPU), a memory controller, a two-channel DMA controller, two-channel programmable 16-bit counter/timer, a wait-state generator, a two-channel asynchronous serial communication interface (ASCI) and a bus controller, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 62×26 mm, with not more than 80 connecting pins or contact areas and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
Z 64180 HD 64 A 180 HD 64 B 180
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 81
ex 8542 11 83
8-bit single chip microcomputer of C-MOS technology with a 16-bit internal structure, consisting of a random-access memory (RAM) with a storage capacity of 2 Kbits, 20 input-output ports, a comparator input port, two asynchronous channels with programmable transfer rates, an interrupt controller, two direct-access memory channels, and two 16-bit counters, in the form of a monolithic integrated circuit contained in a housing the external dimensions of which do not exceed 31×31 mm, containing no more than 84 connecting pins or contact pads and bearing:
- an identification mark consisting of/or including the following alphanumeric combination:
PD 70320
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 81
ex 8542 11 83
8-bit microprocessor of N-MOS (including H-MOS) technology with 16-bit internal architecture, in the form of a monolithic integrated circuit consisting of a central processing unit (CPU), a timing generator, two independent DMA channels, a programmable interrupt controller, three programmable 16-bit timers, programmable memory and peripheral chip select, a programmable wait state generator and a local bus controller, contained in a housing the exterior dimensions of which do not exceed 30×30 mm, with not more than 68 connecting pins or contact areas and bearing:
- an identification marking consisting of or including the following combination of figures:
80188
or
- other identification markings relating to devices complying with the abovementioned description
7
ex 8542 11 81
ex 8542 11 83
ex 8542 11 85
Central processing unit of N-MOS (including H-MOS) technology (N-MOS CPU), consisting of one 16×16-bit service memory, one 16×20-bit service memory, one 32×32-bit service memory, one 8×8-bit service memory, one 16-bit register, two 20-bit registers, one 8-bit register, one 12-bit register, one 5-bit counter and timing network, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 25×25 mm, with not more than 68 connecting pins and bearing:
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 81
ex 8542 11 83
ex 8542 11 85
(cont'd)
- an identification marking consisting of or including the following combination of figures and letters:
LSI-604041855
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 81
ex 8542 11 83
ex 8542 11 85
ex 8542 11 87
Numeric processor extension unit of N-MOS (including H-MOS) technology (N-MOS NPX) containing not more than 14 registers, in the form of a monolithic intergrated circuit, contained
in a housing the exterior dimensions of which do not exceed 16×53 mm, with not more than 40 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
80287
8087
NS 32081
TX 32081 W
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 81
ex 8542 11 83
ex 8542 11 85
ex 8542 11 87
Floating-point arithmetic co-processor of MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 46×53 mm, with not more than 208 connecting pins or contact areas and bearing:
- an identification marking consisting of or including one of the following combinations of figures or figures and letters:
80387
R 2010/16
74 APC 8847
MC 68881
NCR 32020
WTL 3167
MC 68882
NS 32381
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 81
ex 8542 11 83
ex 8542 11 85
ex 8542 11 87
Text co-processor, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 25×25 mm, with not more than 68 connecting pins, and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
C 82730
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 83
16-bit single-chip microcomputer using N-MOS technology (including H-MOS), comprising at least one read-only memory (ROM) in the form of a monolithic integrated circuit with a 510×13-bit storage capacity or a programmable UV-erasable read-only memory (EPROM) in the form of a monolithic integrated circuit with a 512×13-bit storage capacity, a read/write random access (RAM) in the form of a monolithic integrated circuit with a 2 Kbit storage capacity in the form of a monolithic integrated circuit in a housing containing no more than 28 connecting pins and with dimensions not exceeding 16×37 mm, and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
PD 7720
PD 77 P 20
or
- other identification markings relating to devices complying with the abovementioned description
0
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 83
16-bit single-chip microcomputer, comprising a read-only memory (ROM) with a capacity of
64 Kbits, a random access memory (RAM) with a capacity of 2 Kbits, a digital/analog converter with
sample/hold, contained in a housing the exterior dimensions of which do not exceed 40×40 mm, with not more than 68 connecting pins or contact areas and bearing:
- an identification marking consisting of or including the following combination of figures:
8397
or
- other identification markings relating to devices complying with the abovementioned description
7
ex 8542 11 83
16-bit microprocessor of bipolar technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 25×82 mm, with not more than 68 connecting pins or contact areas and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
AM 29116
SBP 9989
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 83
16-bit microprocessor of C-MOS technology, consisting of a central processing unit (CPU) and an 8-bit or 16-bit external data bus in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 54×30 mm, with not more than 68 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
Z 70108 80 C 188
Z 70116
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 83
16-bit microprocessor of C-MOS technology, consisting of a central processing unit (CPU), a memory controller, a 2 Kbit cache memory, three programmable 16-bit counter/timers, a full duplex universal asynchronous receiver/transmitter (UART) and four DMA channels, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 26×26 mm, with not more than 68 connecting pins or contact areas and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
Z 280
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 83
16-bit microprocessor in N-MOS (including H-MOS) technology, in the form of a monolithic integrated circuit, consisting of a central processing unit (CPU), a timing generator, two independent DMA channels, a programmable interrupt controller, three programmable 16-bit timers, programmable memory and external chip selection logic, a programmable wait state generator with bus control unit, contained in a housing the exterior dimensions of which do not exceed 30×30 mm, with not more than 68 connecting pins or contact areas and bearing:
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 83
(cont'd)
- an identification marking consisting of or including the following combination of figures:
80186
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 83
16-bit microprocessor of N-MOS technology (including H-MOS) consisting of a central processing unit (CPU), a memory management and protection unit (MMU) and a real address and virtual address operating mode system (OSO), in the form of a monolithic integrated circuit, contained in a housing whose exterior dimensions do not exceed 30×30 mm, with not more than 68 connecting pins or contact areas and bearing:
- an identification marking consisting of or including the following combination of figures:
80286
or
- other identification markings relating to devices complying with the abovementioned description
10
ex 8542 11 83
16-bit communication processor of C-MOS technology, containing a coder/decoder for the conversion of data into serial/parallel signals in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 28×28 mm, with not more than 132 connecting pins or contact areas and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
TMS 380 C 16
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 83
16-bit communications processor of N-MOS (including H-MOS) technology, consisting of a random access memory (RAM) with a storage capacity of 22 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15×60 mm, with not more than 48 connecting pins of contact areas and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
TMS 38010
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 83
ex 8542 11 85
16-bit single-chip microcomputer of MOS technology, with an arithmetic-logic unit (ALU) of 32 bits, consisting of a random-access memory (RAM) with a storage capacity of not more than 9 Kbits, a read-only memory (ROM) or a UV-erasable, programmable read-only memory (EPROM) with a storage capacity of not more than 64 Kbits, in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 54×29 mm, with not more than 68 connecting pins or contact areas and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
32010 320 C 10 320 C 17 320 E 15
32011 320 C 15 320 C 25 320 E 17
or
- other identification markings relating to devices complying with the abovementioned description
0
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 83
ex 8542 11 85
16-bit microprocessor with an arithmetic-logic unit (ALU) of 32 bits, of MOS-technology, comprising a random-access memory (RAM) with a storage capacity of 8,5 Kbits, in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 29×29 mm, with not more than 68 connecting pins or contact areas and bearing:
- an identification marking consisting of or including one of the following combinations of figures or figures and letters:
TMS 32020
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 85
32-bit single-chip microcomputers of N-MOS (including H-MOS) technology, in the form of a monolithic integrated circuit consisting of 24 registers of 32 bits and a RAM with a capacity of 2 Kbits, contained in a housing the exterior dimensions of which do not exceed 24×24 mm, with not more than 68 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
HGC 6127
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 85
32-bit single-chip microcomputer in C-MOS-technology, in the form of a monolithic integrated circuit consisting of a ROM with a capacity of 24 Kbits and RAMs with a total capacitiy of 4 Kbits, contained in a housing the exterior dimensions of which are not less than 30×30 mm, with not more than 84 connecting pins or contact areas and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
MB 8764
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 85
32-bit single-chip microcomputer, consisting of a read-only memory (ROM) having a storage capacity of 16 Kbits, random-access memories (RAM) having a total storage capacity of 32 Kbits a floating decimal point arithmetical unit with a capacity of 32 bits in the form of a monolithic integrated circuit, contained in a housing whose exterior dimensions do not exceed 30×53 mm, with not more than 100 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
DSP 32
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 85
32-bit single-chip microcomputer of C-MOS technology, consisting of two random-access read-write memories (RAM) with a total storage capacity of 64 Kbits and a read-only memory (ROM) with a capacity of 128 Kbits, in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 28×28 mm, with not more than 100 connecting pins or contact areas and bearing:
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 85
(cont'd)
- an identification marking consisting of or including the following combination of figures and letters:
320 C 30
or
- other identification markings relating to circuits complying with the abovementioned description
0
ex 8542 11 85
32-bit microprocessor of C-MOS technology, with a 16-bit external data bus and a 24-bit external address bus, with a virtual storage address capacity of 64 terabytes, in the form of a monolithic integrated circuit, contained in a housing whose dimensions do not exceed 31×31 mm, with not more than 100 connecting pins or contact areas and bearing:
- an identification marking consisting of or including the following combinations of figures and letters:
80386 SX
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 85
32-bit microprocessor of C-MOS technology, with an external data bus of 32 bits and an external address bus of 32 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 46×46 mm, with not more than 208 connecting pins or contact areas and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
80386
80 486
MC 68020 NS 32532 CYC 601
MC 68030 NS 32 C 032
L 64801
MC 68032 R 2000/16
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 85
32-bit microprocessor of N-MOS (including H-MOS) technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 38×38 mm, with not more than 132 connecting pins or contact areas and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
NCR 32000
NS 32032
NS 32332
CPU 0404 1871
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Arithmetic-logic unit of N-MOS (including H-MOS) technology, consisting of one 32-bit register, one 24-bit register, one 4-bit register, 12 1-bit registers, two 16×24-bit service memories, one logic network performing arithmetic and logic operations, decodifying logic, and error detection and management logic, one 8-bit counter and a timing network, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 23×82 mm, with not more than 64 connecting pins and bearing:
- the identification marking:
ALU 0486
or
- other identification markings relating to devices complying with the abovementioned description
0
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 91
Arithmetic-logic unit (ALU) of C-MOS technology, with a capacity of 32-bits, for image processors in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 50×50 mm, with not more than 145 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
XL 8237
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Logic circuit of N-MOS (including H-MOS) technology (N-MOS LC) serving as a clock generator for central processing unit, main memory and input/output interfaces, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 25×25 mm, with not more than 68 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
H 108982 (MCC)
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Clock generator and controller for microprocessors, of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 24×9 mm, with not more than 20 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
82 C 84 82 C 284
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Clock generator for a graphics controller in the form of a monolithic integrated circuit of C-MOS technology contained in a housing the exterior dimensions of which do not exceed 20×7 mm with 16 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figure and letters:
PCLK 1
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Logic circuit of bipolar technology, with not more than six logic functions, a supply voltage of not less than 11 V and not more than 18 V, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 8×23 mm, with not more than 18 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
FZH 101 A
FZH 111 A
FZH 191
FZH 201
FZJ 121
FZK 101
or
- other identification markings relating to devices complying with the abovementioned description
0
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 91
Logic control circuits of N-MOS (including H-MOS) technology, consisting of one 7-bit register, three timers, one multiplexer, sequential and combining networks intended to perform control operations, decodifying logic, error detection and management logic and a timing network, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 23×82 mm, with not more than 64 connecting pins and bearing:
- the identification marking:
MIC 0482
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Semi-custom logic array (gate array) of C-MOS technology, with metal gates, with an operating voltage of 12 volts, with not less than 637 two-input functions, having within the array a digital code produced by an electron beam, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 29×11 mm, with not more than 22 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
FB 215
or
- other identification markings relating to devices complying with the abovementioned description
7
ex 8542 11 91
Field programmable array logics (PALs) of C-MOS technology, with a programmable AND array, fixed OR array, not more than 32 inputs and not more than 12 outputs, whether or not with registers, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 19×39 mm, with not more than 28 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
16 P 8
16 RP 4
C 16 L 8
C 16 R 4
C 16 R 6
C 16 R 8
C 20 G 10
C 22 V 10
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Programmable, non-erasable, logic circuits (field programmable logic array) of TTL Schottky technology, with not more than 48 AND functions, not more than eight OR functions, and not more than 16 inputs, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 28 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures or figures and letters:
FP 54 AS 839
FP 74 AS 839
82 S 100
FP 54 AS 840
FP 74 AS 840
82 S 101
SN 54 LS 333
SN 74 LS 333
SN 54 LS 334
SN 74 LS 334
93458
SN 54 LS 335
SN 74 LS 335
93459
SN 54 LS 336
SN 74 LS 336
or
- other identification markings relating to devices complying with the abovementioned description
5
CN code
Description
Rate of
autonomous
duty
(%)
ex 8582 11 91
Logic call array (LCA) with not more than 1 200 gates, programmable, electrically erasable, of C-MOS technology, in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 62×31 mm, with not more than 84 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
XC 2064
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Non-erasable, programmable logic device of C-MOS technology, with not less than 1 800 logic gates, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 28×28 mm, with not more than 68 connecting pins or contact areas and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
EP 1800
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Non-erasable user-programmable logic sequencer of bipolar technology, having not more than 48 AND functions, a 6-bit state register, an 8-bit output register, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 28 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
82 S 105
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
UV-erasable programmable logic device (EPLD) of C-MOS technology containing not less than 600 logic gates, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 29×124 mm, with a quartz window on the upper surface, with not more than 28 connecting pins or contact areas and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
EP 600
CY 7C 330
16 L 8-W
CY 7C 331
16 R 4-W
CY 7C 332
16 R 6-W
16 R 8-W
22 V 10-W
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Error detection and correction circuit of N-MOS (including H-MOS) technology capable of detecting and correcting single bit errors and detecting all double bit errors, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30×30 mm, with not more than 68 contact areas and bearing:
- an identification marking consisting of or including the following combination of figures:
8206
or
- other identification markings relating to devices complying with the abovementioned description
0
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 91
Burst error processor (BEP) of N-MOS (including H-MOS) technology for detecting and correcting multiple errors derived from a line of magnetic disks, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×54 mm, with not more than 40 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
Z 8065
AM 9520
AM 9521
or
- any other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Error correction and detection unit (ECDU) of bipolar technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×62 mm, with not more than 48 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures or figures and letters:
2960
74 F 630
74 F 631
74 LS 630
74 LS 631
DP 8400
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
CPU controller, of C-MOS technology comprising a control unit for the refreshment of memories, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 31×31 mm, with not more than 100 connecting pins or contact areas and bearing:
- an identification marking consisting of or including one of the following combinations of figures or figures and letters:
FE 3010
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Control circuit of C-MOS technology, operating at 12 MHz consisting of a programmable interval timer, a clockgenerator, two direct memory access controllers and a memory mapper, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30×30 mm, with not more than 84 connecting pins or contact areas and bearing:
- an identification marking consisting of or including the following combinations of figures:
82 231
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Control circuit of C-MOS technology, for the management of asynchronous cycles of a 32-bit central processing unit, of a direct memory access circuit and of a multimaster bus, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 31×31 mm, with not more than 100 connecting pins and bearing:
CNcode
Description
Rate of
autonomous
duty
(%)
ex 8542 11 91
(cont'd)
- an identification marking consisting of or including the following combination of figures and letters:
82 C 321
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Control and interface circuit for 16-bit peripherals, of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30×30 mm, with not more than 132 connecting pins or contact areas and bearing:
- an identification marking consisting of or including one of the following combinations of figures or figures and letters:
82 303
82 304
82 306
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Hard-disk controller of MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 31×53 mm, with not more than 84 connecting pins or contact areas and bearing:
- an identification marking consisting of or including one of the following combinations of figures or figures and letters:
1454-001
HDC 9224
PD 7261
PD 7262
WD 1010
WD 2010
WD 42 C 22
WD 5010
WD 5011
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Floppy-disk controller of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 26×62 mm, with not more than 68 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of letters and figures:
FE 2100 82077
G 70360-33
L 1 A 0519
MB 89311
WD 16 C 92
WD 37 C 65
WD 57 C 65
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Four-channel read/write monolithic integrated circuit of bipolar technology for controlling magnetic heads in hard-disk units, contained in a housing whose exterior dimensions do not exceed 12×19 mm, with not more than 28 connecting pins and bearing:
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 91
(cont'd)
- an identification marking consisting of or including the following combination of figures and letters:
SSI 510
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Bus controller of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 41×41 mm, with not more than 145 connecting pins or contact areas and bearing:
- an identification marking consisting of or including one of the following combinations of figures or figures and letters:
82 C 301 82 C 88 82 C 211 82 C 288 82 308 82 309
82355
82358
MSM 6307
VIC 068
VL 86 C 410
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Seven-channel programmable controller for direct memory access, comprising two eight-channel programmable interrupt controllers and five programmable 16-bit timers/counters, of C-MOS technology in the form of a monolithic integrated circuit, containing in a housing the exterior dimensions of which do not exceed 32×32 mm, with not more than 132 connecting pins or contact areas and bearing:
- an identification marking consisting of or including the following combinations of figures:
82 357
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Direct memory access controller comprising the detection and the control of the refreshment of dynamic random-access memories (D-RAM), of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 32×32 mm, with not more than 84 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
VC 2730-000 1 C
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Buffer manager and controller of C-MOS technology in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 36×36 mm, with not more than 144 connecting pins or contact areas and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
WD 11 C 00-22 WD 83 C 580 WD 83 C 583 WD 12 C 00-22 82 C 325
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Buffer manager and controller of N-MOS (including H-MOS) technology in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 54×17 mm, with not more than 40 connecting pins and bearing:
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 91
(cont'd)
- an identification marking consisting of or including the following combination of figures and letters:
WD 1015
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Cache memory manager and controller of C-MOS technology, in the form of a monolithic integrated circuit contained in a housing whose external dimensions do not exceed 38×38 mm, with not more than 132 connecting pins or contact areas and bearing:
- an identification marking consisting of or including the following combination of figures:
82385
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Control circuit of C-MOS technology for the control of S/RAMs, capable of multiplexing addresses and generating pulses, and for the sequential control of data for the peripheral magnetic unit/rigid disk interface, and memory control, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30×30 mm, with not more than 84 connecting pins or contact areas and bearing:
- an identification marking consisting of or including the following combination of letters and figures:
OMTI 5055 (OMTI 20513)
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Control circuit for static memory control (S-RAM), of MOS technology, with address multiplexing and pulse generation facility, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 28×54 mm, with not more than 68 connecting pins or contact areas and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
AIC 300
OMTI 506
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Dynamic random access memory controller of MOS technology (MOS D-RAM controller) capable of multiplexing addresses and generating timing, in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 17×62 mm, with not more than 48 connecting pins or 52 contact areas and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
82 C 08
THCT 4502
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Control circuit of bipolar technology for the control of dynamic random-access memories (D-RAMs), capable of multiplexing addresses and generating timing, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 26×67 mm, with not more than 68 connecting pins and bearing:
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 91
(cont'd)
- an identification marking consisting of or including one of the following combinations of figures and letters:
DP 8408 DP 8428 MB 1422
DP 8409 DP 8429 SN 74 S 409
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Memory management unit of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the dimension of which do not exceed 36×36 mm, with not more than 132 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
MC 68851
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Memory management unit of N-MOS (including H-MOS) technology (N-MOS MMU) with a maximum addressing capacity of 4 Gbytes, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 36×82 mm, with not more than 132 connecting pins or contact areas and bearing:
- an identification marking consisting of or including one of the following combinations of figures or figures and letters:
68451 TX 32082 W NS 32082 NS 32382 0404 1872
or
- other identification markings relating devices complying with the abovementioned description
0
ex 8542 11 91
Input-output circuit of N-MOS (including H-MOS) technology for data control equipped with a timing control with a static random-access memory (S-RAM) with a capacity of 128×8 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×54 mm, with not more than 40 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures or figures and letters:
6532
CO 10750
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Sequence control circuit of N-MOS (including H-MOS) technology, consisting of one 32-bit register, three 16-bit registers, one 16×16-bit service memory, one 7×17-bit last-in-first-out (LIFO) memory, one adder circuit, decodifying logic, priority logic, error detection and management logic, one 16-bit multiplexer, one 8-bit counter and a timing network, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 23×82 mm, with not more than 64 connecting pins and bearing:
- the identification marking:
CSS 0484
or
- other identification markings relating to devices complying with the abovementioned description
0
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 91
Sequential data control circuit of MOS technology for interface between a hard-disk memory unit and the memory control unit, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 28×54 mm, with not more than 68 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
AIC 010 AIC 100
OMTI 505
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Sequence control circuit for image processors of C-MOS technology in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 50×50 mm, with not more than 145 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
XL 8236
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Status and shift control unit of bipolar technology in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×57 mm with not more than 42 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
AM 2904
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Circuit of advanced low-power Schottky (ALPS) technology for the asynchronous control of signal lines (bus) and the conversion of a local bus into a multiplexed bus (BAM), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 37×13 mm, with not more than 28 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures:
68452
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Contention resolving a local area network (LAN) controller, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 63×63 mm, with not more than 84 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures or figures and letters:
8001 MCM 68590 82590
8003
WD 2840
82592
82586
WD 80 C 24
82588
WD 83 C 503
AM 7990
WD 83 C 510
COM 9026
WD 83 C 603
DP 8390
WD 83 C 690
or
- other identification markings relating to devices complying with the abovementioned description
0
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 91
Multiprotocol control circuit for the serial transmission of data, in the form of a monolithic integrated circuit of N-MOS (including H-MOS) technology, contained in a housing the exterior dimensions of which do not exceed 18×54 mm, with not more than 44 connecting pins or contact areas and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
SCN 2652 MC 2652
SCN 68652 MC 68652
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Control circuit for data block transfer between dynamic memory and peripherals (DMA transfer controller or ´DTC'), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 63×38 mm, with not more than 133 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures or figures and letters:
Z 8516 82 C 223 HD 68450
Z 9516 82307
WE 32104
Z 9516 82380
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Control circuit for the universal asynchronous transmission and the separation of data and interface for peripherals, of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 27×27 mm, with not more than 80 connecting pins or contact areas and bearing:
- an identification marking consisting of or including the following combination of figures or figures and letters:
82 C 607
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Serial communication controllers of MOS technology, with two independent duplex channels with a capacity of 1,6 Mbits/sec or more but not exceeding 4 Mbits/sec, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 62×21 mm, with not more than 52 connecting pins or contact areas and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
Z 80 C 30 PD 72001
Z 85 C 30 SNC 68562
Z 85 C 35
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Control circuit, of N-MOS (including H-MOS) technology, for data/address flows from the CPU, inputs/outputs and the main memory, in the form of a monolithic integrated circuit, contained in a housing whose dimensions do not exceed 36×36 mm, with not more than 132 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
CIM 1456
or
- other identification markings relating to devices complying with the abovementioned description
0
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 91
Data-synchronizer for tape-reading units of bipolar technology in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 39×15 mm with not more than 28 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
VT 210
or
- other identification markings relating to the abovementioned description
0
ex 8542 11 91
Display controller and character generator (DCCG), of C-MOS technology, for liquid-crystal dot-matrix display system in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 24×26 mm, with not more than 80 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
HD 61830 LH 5821
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Interpolation pulse generator, of C-MOS technology, for controlling geometrical functions, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 28 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
KM 3701
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Graphics controller of C-MOS technology, in the form of a monolithic integrated circuit contained
in a housing the exterior dimensions of which do not exceed 31×31 mm, with not more than
100 connecting pins or contact areas and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
PEGA
82 C 431
82 C 435
82 C 441
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Graphic display controller (GDC) of N-MOS technology (including H-MOS), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 52×18 mm, with not more than 44 connecting pins and bearing:
- an identification marking consisting of or including the following combinations of figures and letters:
Z 7220 A
82720
or
- other identification markings relating to devices complying with the abovementioned description
0
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 91
Video controller, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15×52 mm, with not more than 40 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
38301-A
L 1A 2099 PVC-2
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Cathode-ray tube video controller of MOS-technology, in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 32×62 mm, with not more than 68 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
CRT 9007 VL 86 C 310
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Monochrome display controller (MDC) of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 25×25 mm, with not more than 68 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
01-01.00 551 A
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Cathode-ray tube controller (CRTC) of C-MOS technology in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 32×62 mm, with not more than 100 connecting pins or contact areas and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
82 C 434 V 6363 MB 89321 MB 89322
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Cathode-ray tube controller (CRTC) of N-MOS (including H-MOS) technology for the control of more than 80 signs per line, in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 62×25 mm, with not more than 68 connecting pins or contact areas and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
AM 8052
or
- other identification markings relating to devices complying with the abovementioned description
0
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 91
Cathode-ray tube controller (CRTC) of bipolar technology, in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 15×55 mm, with not more than 40 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
SCB 2675
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Control circuit for cathode-ray tubes or liquid-crystal displays (CRT and LCD controller) of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30×30 mm, with not more than 84 connecting pins or contact areas, and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
V 6355-DJ
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Driver circuit for liquid crystal displays (LCD-driver) of C-MOS technology, in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 14×14 mm, comprising not more than 64 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
LC 7582
or
- other identification codes relating to devices which comply with this description
0
ex 8542 11 91
Programmable advanced video display controller (AVDC) of N-MOS (including H-MOS) technology, in the form of a monolithic integrated circuit, contained in a housing whose external dimensions do not exceed 15×55 mm, with not more than 40 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
SCN 2674
or
- other identification markings relating to devices complying with the abovementioned description
7
ex 8542 11 91
Video gate arrays programmed to control graphics and memory, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 35×35 mm, with not more than 144 connecting pins or contact areas and bearing:
- an identification marking consisting of or including one of the following combination of figures and letters:
PVGA 82 C 451
PVGA 82 C 452
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Colour selection controller of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing whose exterior dimensions do not exceed 19×52 mm, with not more than 44 connecting pins or contact areas and bearing:
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 91
(cont'd)
- an identification marking consisting of or including the following combination of figures and letters:
82 C 433
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Monolithic integrated circuit with at least 16 analog switching elements, of C-MOS technology, for controlling signals in the range of 20 to 20 000 Hz, capable of dealing with signals up to 3 V with a distortion of not more than 0,05 % over the whole frequency range at a voltage of 1 V, contained in a housing the exterior dimensions of which do not exceed 16×40 mm, with not more than 42 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
TC 9164 N
TC 9177 P
TC 9184 P
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Analog-digital monolithic circuit, capable of controlling brushless motors and keeping their speed
constant, contained in a housing the exterior dimensions of which do not exceed 9×25 mm, with not more than 20 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
MGA 3015 A
SSI 590
UC 1633
UC 1634
UC 3633
UC 3634
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Analog-digital monolithic integrated circuit of bipolar technology, for damping the oscillations of stepping motors during the positioning phase, contained in a housing the exterior dimensions of which do not exceed 18×39 mm, with not more than 28 connecting pins and bearing:
- an identification marking consisting of or including the following combination of letters:
STEDA
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Controller for servo-devices of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×54 mm, with not more than 40 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
KM 3702
or
- other identification markings relating to devices complying with the abovementioned description
0
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 91
Four-channel control circuit of C-MOS technology, for maintaining a constant electromagnetic traction force with incorporated diodes and a storage capacity of 4 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 7×22 mm, with not more than 16 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
UCN 5813
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Eight-channel control circuit of C-MOS technology, for maintaining a constant electromagnetic traction force with incorporated diodes and a storage capacity of 8 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 9×28 mm, with not more than 22 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
UCN 5801
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Control circuit of TTL technology for the firing of magnetic print hammers, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 8×23 mm, with not more than 18 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures:
801379-002
810751-001
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
8-bit (octal) dynamic memory bipolar driver, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×33 mm, with not more than 20 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
AM 2965
AM 2966
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Timing control unit (TCU) with two-phase cycle for central processing unit (CPU) and memory management unit (MMU), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×33 mm, with not more than 24 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
NS 32201
NS 32 C 201
or
- other identification markings relating to devices complying with the abovementioned description
0
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 91
Driver circuit for writer signals for magnetic tape storage units, of bipolar technology in the form of a monolithic integrated circuit obtained in a housing the exterior dimensions of which do not exceed 29×11 mm with not more than 22 connecting pins and bearing:
- an identification marking consisting of or including the following combination if figures and letters:
VT 211
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Control and interface circuit between a 32-bit microprocessor and a floating point coprocessor of CMOs technology in the form of a monolithic integrated circuit contained in a housing, the exterior dimensions of which do not exceed 54×54 mm, with not more than 299 connecting pins or contact areas and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
CY 7 C 608
L 64802
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Control and interface operating at 12 MHz circuit of C-MOS technology, consisting of a clock generator, a bus controller for a microprocessor, a timer, two programmable interrupt controllers and an interface for numeric coprocessor, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30×30 mm, with not more than 84 connecting pins or contact areas and bearing:
- an identification marking consisting of or including the following combinations of figures:
82230
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Control circuit for bus interface of MOS technology functioning as an adaptor between the central unit and the external control units, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 63×26 mm, with not more than 68 connecting pins on contact areas and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
WD 33 C 92
WD 33 C 93
NCR 5380
NCR 5381
NCR 53 C 80
NCR 53 C 90
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Interface and control circuit for Manchester-coded data, of Schottky technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 8×14 mm, with not more than 20 connecting pins or contact areas and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
TMS 38052
or
- other identification markings relating to devices complying with the abovementioned description
0
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 91
Bus interface circuit with a programmable data transfer rate, of N-MOS (including H-MOS) technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 27×27 mm, with not more than 100 connecting pins or contact areas and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
TMS 38030
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Serial and parallel interface bus circuit for communication between the central processing unit and a peripheral, of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 26×26 mm, with not more than 68 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures:
1820-5022
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Subscriber line interface circuit (SLIC) with a high voltage rating of not less than 200 V, with direct internal relay drive, in the form of a monolothic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18×39 mm, with not more than 28 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
HC 5504
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Enhanced programmable communications interface (EPCI), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 28 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures:
2661
68661
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Interface circuit between 32-bit microprocessors and 16-bit peripheral units and D-RAM controller, of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 30×30 mm, with no more than 132 connecting pins or contact areas and bearing:
- an identification marking consisting of or including the following combination of figures:
82335
or
- other identification markings relating to devices complying with the abovementioned description
0
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 91
Interface circuit for the synchronization of data flow from a hard-disk drive, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×35 mm, with not more than 28 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
DP 8462
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Analog-digital monolithic integrated circuit of bipolar technology for interface signals between the peripheral hard-disk, memory unit and the central unit, contained in a housing the exterior dimensions of which do not exceed 15×50 mm, with not more than 40 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
AD 581 C
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Interface circuit of C-MOS technology for signals between peripheral hard-disk memory units and central units, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 28×53 mm, with not more than 80 connecting pins or contact areas and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
OMTI 5080 (OMTI 20508)
OMTI 5090
(OMTI 20509)
WD 11 C 00-17
WD 14 C 00-17
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Encoder/decoder serial interface circuit for hard-disk drives, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×37 mm, with not more than 28 connecting pins or contact areas and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
AIC 250
AIC 270
DP 8463 B
OMTI 5027 (OMTI 20527)
OMTI 5070 (OMTI 20507)
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Serial interface, capable of implementing the data stream encoding, decoding and associated control functions for a local area network, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×33 mm, with not more than 24 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures or figures and letters:
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 91
(cont'd)
8002
8023
82501
82 C 501
AM 7991
COM 9032
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Station digital interface circuit for parallel-to-serial or serial-to-parallel conversion of digital signals in telephone sets, of C-MOS technology (C-MOS STID), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 28 connecting pins, and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
WCC 295 G
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Bus interface circuit in C-MOS technology, for the control of communication lines comprising a numerical bus, two independent receivers and a transmitter consisting of a first-in first-out (FIFO) memory, in the form of a monolithic integrated circuit, contained in a housing whose exterior dimensions do not exceed 20×52 mm, with not more than 44 connecting pins or contact areas and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
HS 3282
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Bus interface for graphic controllers, of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 31×31 mm, with not more than 84 connecting pins or contact areas and bearing:
- an identification marking consisting of or including the following combination of letters:
PBI
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Bus interface circuit of bipolar technology with 8-, 9- or 10-bit registers, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 9×34 mm, with not more than 24 connecting pins or contact areas and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
AM 29821
AM 29822
AM 29823
AM 29824
AM 29825
AM 29826
AM 29843
AM 29844
AM 29845
or
- other identification markings relating to devices complying with the abovementioned description
0
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 91
Multiple bus interface circuit (multiple bus buffer) of low-power Schottky technolgy for interfacing the error correction and detection unit system data bus and dynamic random-access memory (D-RAM), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 20×33 mm, with not more than 28 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
AM 2961
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Bus interface circuit of AS or ALPS technology, for the management of address signals, in the form of a monolithic integrated circuit, contained in a housing the external dimensions of which do not exceed 26×26 mm, with not more than 68 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
82 A 203
82 A 204
82 A 303
82 A 304
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Bus interface circuit of AS or ALPS technology, for the management of data flow in the signal lines of the CPU, in the form of a monolithic integrated circuit, contained in a housing the external dimensions of which do not exceed 26×26 mm, with not more than 68 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
82 A 205
82 A 305
82 A 436
82 A 442
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 91
Bus interface circuit of C-MOS technology, for the management of address signals, comprising a circuit with 4×2-input AND gates, two buffer circuits, two latch circuits, four independent transceivers, a 256×4-bit PROM, in the form of a monolithic integrated circuit, contained in a housing the external dimensions of which do not exceed 31×31 mm, with not more than 84 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
FE 3020
or
- other identification markings relating to devices complying with the abovementioned description
0
0
ex 8542 11 91
Bus interface circuit of C-MOS technology, for the management of I/0 data flow in signal lines, with four independent transceivers, a circuit with 4×2-input AND gates, a circuit with 4×2-input NAND gates, a separator circuit, a flip-flop circuit, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 31×31 mm, with not more than 84 connecting pins and bearing:
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 91
(cont'd)
- an identification marking consisting of or including the following combination of figures and letters:
FE 3030
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 99
Computing unit without an internal programme sequencer for the multiplication or processing of fixed and floating point numbers, of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 42×42 mm, with not more than 144 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
ADSP 3210
ADSP 3220
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 99
8×8-bit multiplier accumulator (MAC) of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 62×16 mm, with not more than 48 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
ADSP-1008 A
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 99
Hard-disk data separator (HDDS), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×37 mm, with not more than 28 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
DP 8460-2
DP 8460-3
DP 8460-4
DP 8465
HDC 9226
WD 10 C 20
WD 10 C 21
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 99
Address comparator consisting of one or more static random-access memories (S-RAM), a parity generator, a parity checker and one or more comparators, af C-MOS technology, in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 20×65 mm, with not more than 48 connecting pins or contact areas and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
SN 74 ACT 2152 SN 74 ACT 2154
or
- other identification markings relating to devices complying with the abovementioned description
0
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 99
Six- or eight-channel read/write signal generator for hard-disk drives, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 13×13 mm, with not more than 40 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
SSI 117
SSI 501
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 99
Receiver/transmitter of Schottky technology, for Manchester-coded data, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18×28 mm, with not more than 44 connecting pins or contact areas and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
TMS 38051 TMS 38053
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 99
Dual universal asynchronous receiver/transmitter (DUART) of MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18×53 mm, with not more than 44 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figure:
2681
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 99
Monolithic integrated circuit in N-MOS technology (including H-MOS) for the display of graphic symbols on a cathode-ray tube operating in stroke mode, contained in a housing the exterior dimensions of which do not exceed 28×61 mm, with not more than 68 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures or figures and letters:
96 114 898
96 114 899
96 149 135
FCD 28 042 277
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 99
Sequential control and generating circuit of C-MOS technology for the memory display, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 19×52 mm, with not more than 44 connecting pins or contact areas and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
82 C 432
or
- other identification markings relating to devices complying with the abovementioned description
0
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 99
Demodulator for phase-shifted signals, of bipolar technology, with a clock signal generator and a circuit for parallel to serial conversion, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15×28 mm, with not more than 30 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
TA 8662
or
- an identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 99
Demodulator/tone-decoder of bipolar technology for frequency decoding, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 10×21 mm, with not more than 14 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
XR 2211
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 99
Encoder/decoder circuit of C-MOS technology, using Manchester code (MED) for the transmission of data in continuous flux with a repeater mode, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×33 mm, with not more than
20 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
HD 6409
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 99
Encoder/decoder of N-MOS (including H-MOS) technology, for the conversion of data into serial or parallel signals, consisting of an arithmetic logic unit (ALU) and a read-only memory (ROM) with a storage capacity of 128 Kbits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15×60 mm, with not more than 48 connecting pins or contact areas and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
TMS 38020
TMS 38021
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 99
Data synchronizer and encoder/decoder of bipolar technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 13×13 mm, with not more than 28 connecting pins or contact areas and bearing:
- an identification marking consisting of or including the following combination of figures or letters:
SSI 532
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 99
Pulse code modulation (PCM) codec of N-MOS (including H-MOS) technology, consisting of a sample and hold circuit digital-to-analogue converter, comparator, successive approximation register and logic function to interface to a full duplex PCM link, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 11×29 mm, with not more than 22 connecting pins and bearing:
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 99
(cont'd)
- an identification marking consisting of or including the following combination of figures and letters:
2911 A-1
or
- other identification markings relating to devices complying with the abovementioned description
7
ex 8542 11 99
Subscriber line audio-processing circuit (SLAC) with two digital signal processors, an analog-to-
digital converter and a digital-to-analog converter, in the form of a monolithic integrated circuit,
contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 28 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
AM 7901
AM 7905
or
- other identification markings relating to devices complying with the abovementioned description
7
ex 8542 11 99
Analog-to-digital signal converter, containing amplifiers, D/A and A/D converters with a supply
voltage of 12 V ± 10 % and a digital serial interface with asynchronous receiver/transmitter, in the form of a monolithic integrated circuit, contained in a housing the external dimensions of which do not exceed 18×18 mm, with not more than 44 connecting pins or contact areas and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
AD 75002
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 99
16-bit digital-to-analog converter, incorporating a reference voltage of bipolar technology, with 16 parallel inputs, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 28 connecting pins or contact areas and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
DAC 700
DAC 701
DAC 702
DAC 703
or
- other identification markings relating to devices complying with the abovementioned description
7
ex 8542 11 99
Analog-to-digital converter for the calculation of the average value of variable wave-forms, in the
form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18×10 mm, with not more than 14 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
AD 536 A
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 99
8-bit analog-to-digital parallel converter, of C-MOS technology, in the form of a monolithic
integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×39 mm, with not more than 28 connecting pins or contact areas, and bearing:
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 99
(cont'd)
- an identification marking consisting of or including the following combinations of figures and letters:
MP 7683
MP 7684
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 99
12-bit analog-to-digital converter, incorporating a voltage reference and clock, in the form of a
monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 40×16 mm, with not more than 28 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
AD 574 A
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 99
16-bit analog-to-digital converter of C-MOS technology, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×54 mm, with not more than 44 connecting pins or contact areas, and bearing:
- an identification marking consisting of or including one the following combinations of figures and letters:
CS 5016 CSZ 5116 CSZ 5316
CSZ 5126
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 99
7-channel analog-to-digital converter with a capacity of 15 bits per channel, in the form of a
monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18×18 mm, with not more than 44 connecting pins or contact areas, and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
MAX 133
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 99
Pulse code modulation (PCM) transmit/receive filter of N-MOS (including H-MOS) technology, consisting of two filters of a PCM line or trunk termination, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 10×21 mm, with not more than 16 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
D 2912 A
or
- other identification markings relating to devices complying with the abovementioned description
7
ex 8542 11 99
Clock/calendar circuit of C-MOS technology, incorporating a quartz crystal oscillator, independent timer recorders and a timer, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×33 mm, with not more than 24 connecting pins and bearing:
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 99
(cont'd)
- an identification marking consisting of or including one of the following combinations of figures or following combinations of figures or figures and letters:
MM 581 74 A
MM 58167
58274
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 99
Clock circuit of C-MOS technology, with audio and hour-count output, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×33 mm, with not more than 24 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures or figures and letters:
SVM 5530
7910
or
- other identification markings relating to devices complying with the abovementioned description, for use in the manufacture of goods falling within Chapter 91 (a)
0
ex 8542 11 99
Clock/calendar circuit of C-MOS technology incorporating a programmable generator for periodic interruptions and square waves, and a static random-access memory with a storage capacity of 400 bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 18×34 mm, with not more than 44 connecting pins or contact areas and bearing:
- an identification marking consisting of or including one of the following combination of figures and letters:
MC 146 818
DS 1287
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 99
Clock circuit of C-MOS technology consisting of a 64-bit clock counter, a 64-bit state register, an oscillator and a control logic circuit for the reading and writing cycles, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 59×16 mm, with not more than 48 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
TOD 0815
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 99
Function generator of bipolar technology for the generation of variable wave-forms, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 10×21 mm, with not more than 16 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
XR 2206
XR 8038
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 99
Digital signal synthesizer of C-MOS technology with one frequency generator producing one signal and able to output one sound, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 8×25 mm, with not more than 18 connecting pins and bearing:
(a) Control of the use for this special purpose shall be carried out pursuant to the relevant Community provisions.
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 99
(cont'd)
- an identification marking consisting of or including the following combination of figures and letters:
UMC 3511 A
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 99
Programmable digital signal synthesizer of C-MOS technology with 13 frequency generators each producing up to five sounds and an output capacity of up to 65 sounds, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 15×50 mm, with not more than 40 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
DPS 6401
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 99
Signal synthesizer of N-MOS (including H-MOS) technology with a frequency generator, a memory of 15 instrumental tones, a digital-to-analog converter and a quartz oscillator in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 8×25 mm, with not more than 18 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
YM 2413
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 99
Phoneme speech synthesizer of C-MOS technology, with a supply current of less than 10 mA, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 28 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
CD 54121 N2L
CM 54104
SC 01
CD 54122 N2L
CM 54145 N2L
SSI 263
CD 54123 N2L
CM 54146 N2L
CD 54147 N2L
CM 54166 N2L
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 99
Monolithic integrated circuit (read/write data processor circuit) for the amplification and conversion of read signals and conversion of write signals for hard-disk drives, contained in a housing the exterior dimensions of which do not exceed 19×38 mm, with not more than 28 connecting pins or contact areas and bearing:
- an identification marking consisting of or including one of the following combinations of letters and figures:
SSI 540
SSI 541
or
- other identification markings relating to devices complying with the abovementioned description
0
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 11 99
Programmable amplifier, of bipolar technology for signals on a digital communications bus, in the form of monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×21 mm, with not more than 44 connecting pins or contact areas and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
HS 3182
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 99
Repeater circuit, of bipolar technology for the regeneration of pulse-code-modulated signals, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 10×21 mm, with not more than 16 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
XR C 240
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 99
Circuit for the recording and reproduction of speech, working at a programmable speed of not less
than 8 Kbits/sec, with an amplifier and a 10 bit D/A converter, in the form of a monolithic integrated
circuit of C-MOS technology, contained in a housing the exterior dimensions of which do not exceed
18×18 mm, with not more than 60 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
T 6668
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 11 99
Smoke detector operating in a temperature range between at least -20 to +50 °C, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 23×9 mm, with not more than 18 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
CS 235
V 24216
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 19 20
Amplifier, in the form of a monolithic integrated analog circuit, the exterior dimensions of which do not exceed 3×3 mm for use in the manufacture of products falling within code 9021 40 00 (a)
0
ex 8542 19 20
FM receiver/amplifier of bipolar technology, in the form of an unmounted analog monolithic integrated circuit, having dimensions which do not exceed 4×6 mm
For the manufacture of products falling within heading 9021 40 00 (a)
0
ex 8542 19 30
Amplifier, in the form of a monolithic integrated analog circuit, contained in a housing the exterior dimensions of which do not exceed 2×4×4 mm, with not more than 10 connecting pins and bearing:
(a) Control of the use for this special purpose shall be carried out pursuant to the relevant Community provisions.
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 19 30
(cont'd)
- an identification marking consisting of or including one of the following combinations of figures and letters:
C 05
V 35
or
- other identification markings relating to devices complying with the abovementioned description for the manufacture of products falling within code 9021 40 00 (a)
0
ex 8542 19 30
Amplifier with an input current of not more than 80 nA, in the form of a monolithic integrated analog circuit, contained in a housing the exterior dimensions of which do not exceed 8×11 mm or the diameter of which does not exceed 10 mm, with not more than 8 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
OPA 37, OPA 111, OPA 121
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 19 30
Electronically adjustable differential amplifiers for at least the full range of signals from 0 to not less than 400 MHz, in the form of a monolithic integrated analog circuit, contained in a housing the exterior dimensions of which do not exceed 11×11 mm, with not more than 16 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures:
0078-10
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 19 30
Amplifiers for the range of frequencies from 10 Hz to 30 kHz with a gain of not less than 85 dB in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 19×8 mm, with not more than 8 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
M 5218
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 19 30
Winchester disk drive amplifier for magnetic heads, in the form of a monolithic integrated analog
circuit, contained in a housing the exterior dimensions of which do not exceed 7×7mm, with not more than 10 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
A 2480 FC
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 19 30
Amplifier with a programmable gain factor, in the form of a monolithic integrated analog circuit, contained in a housing the exterior dimensions of which do not exceed 30×45 mm, with not more than 32 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
3606 G
or
- other identification markings relating to devices complying with the abovementioned description
0
(a) Control of the use for this special purpose shall be carried out pursuant to the relevant Community provisions.
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 19 30
Thermocouple amplifier for instrumentation control at temperatures from 0 to 50 °C, incorporating an alarm system, in the form of a monolithic integrated circuit, contained in a housing the external dimensions of which do not exceed 20×8 mm, with not more than 14 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
AD 594
AD 595
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 19 70
Interface and control circuit of C-MOS technology, for the generation of graphic symbols on a cathode-ray tube in the form of a monolithic integrated analog circuit, contained in a housing the external dimensions of which do not exceed 9×29 mm, with not more than 28 connecting pins and bearing:
- an identification code consisting of or including the following combination of figures and letters:
MN 1297
or
- other identification relating to devices which comply with the abovementioned description
0
ex 8542 19 90
Read data signal processor for disk drives, of bipolar technology, in the form of a monolithic integrated analog circuit, contained in a housing the exterior dimensions of which do not exceed 13×12 mm, with not more than 28 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
VM 443
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 19 90
Filter unit, of C-MOS technology, for signals with a frequency of 300 Hz or more but not exceeding 3 000 Hz, consisting of a receiver/transmitter, an analog-to-digital converter, a dual-tone
multifrequency generator (DTMF) and interface registers for a central processing unit (CPU), in the form of a monolithic integrated analog circuit, contained in a housing the exterior dimensions of
which do not exceed 14×21 mm, with not more than 60 connecting pins and bearing:
- an identification marking consisting of or containing the following combination of figures and letters:
STC 9130 F
or
- other identification markings relating to circuits complying with the abovementioned description
0
ex 8542 19 90
Four-channel track-and-hold circuit of C-MOS technology, in the form of a monolithic integrated analog circuit, contained in a housing the exterior dimensions of which do not exceed 9×25 mm,
with not more than 18 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
CS 31412
or:
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 19 90
Pre-magnetization control circuit for audio-frequency magnetic tapes, of bipolar technology, in the form of a monolithic integrated analog circuit, contained in a housing the exterior dimensions of
which do not exceed 26×8 mm, with not more than 18 connecting pins and bearing:
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 19 90
(cont'd)
- an identification marking consisting of or including the following combination of figures and letters:
PC 1297 CA
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 19 90
Monolithic integrated analog circuit for the reduction of audio noise by 14 dB, contained in a
housing the exterior dimensions of which do not exceed 26×7 mm, with not more than 18 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
HA 12043
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 19 90
AM and FM receiver, of bipolar technology, in the form of a monolithic integrated analog circuit,
contained in a housing the exterior dimensions of which do not exceed 14×37 mm, with not more than 28 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
CXA 1030 P
CXA 1240 P
or
- other identification markings relating to devices complying with the abovementioned description
7
ex 8542 19 90
Two channel audio signal volume and balance controller, in the form of a monolithic integrated analog circuit, contained in a housing whose dimensions do not exceed 19×8 mm, with not more than 14 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
M 51523
or
- other identification markings relating to monolithic integrated analog circuits complying with the abovementioned description
0
ex 8542 19 90
Delay line, of C-MOS technology, for drop-out compensation of video signals, in the form of a monolithic integrated analog circuit, contained in a housing the exterior dimensions of which do not exceed 10×7 mm, with not more than eight connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
MSM 6965 RS
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 19 90
Switch-unit, of bipolar technology, for audio signals, having a distortion of not more than 0,005 %, comprising two control units and two alternating switches, in the form of a monolithic integrated analog circuit with an audio-frequency switching function, contained in a housing whose dimensions do not exceed 13×8 mm, with not more than 10 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
TK 15022 Z
or
- other identification markings relating to monolithic integrated analog circuits complying with the abovementioned description
0
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 19 90
Monolithic integrated analog circuit of bipolar technology for the overload protection of telephone
exchanges, contained in a housing the exterior dimensions of which do not exceed 11×10 mm, with not more than three connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures:
1515
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 19 90
Frequency generator of bipolar technology, with an operating voltage of not less than 40 and not more than 130 V AC, which generates signals oscillating between 512 (± 22 %) and 640 Hz (± 22 %) at a 10 Hz rate, in the form of a monolithic integrated analog circuit, contained in a housing the external dimensions of which do not exceed 9×11 mm, with not more than eight connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
QMV 155
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 19 90
Temperature transducer in the form of a monolithic integrated analog circuit, contained in a housing the exterior dimensions of which do not exceed 6×4 mm, with not more than three connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
AD 590
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 19 90
Monolithic integrated analog circuit of bipolar technology for driving direct-current motors working at 18 V/1,6 A maximum, contained in a housing the exterior dimensions of which do not exceed 9×26 mm, with not more than 10 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
BA 6109
BA 6209
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 19 90
Monolithic integrated analog circuit of C-MOS technology for controlling the speed of linear or rotary motors and the positioning of magnetic heads, contained in a housing the exterior dimensions of which do not exceed 14×38 mm, with not more than 28 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
A 2460
A 2461
or
- other identification markings relating to devices complying with the abovementioned description
0
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 19 90
Monolithic integrated analog circuit of bipolar technology for driving linear motors or motors with rotating arms, working at 20 V/2,5 A maximum, contained in a housing the exterior dimensions of which do not exceed 17×33 mm, with not more than 24 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
EL 2007
EL 2017
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 19 90
Image sensor consisting of a row of not more than 3 648 photosensitive areas, a matrix linked to shift registers and storage electrodes, in the form of a monolithic integrated analog circuit, contained in a housing the exterior dimensions of which do not exceed 12×43 mm, with not more than 22 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
TCD 103 TCD 105
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 19 90
Interline charge-coupled image sensor with not less than 250 000 and not more than 291 000 photosensitive areas, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 21×32 mm, with not more than 20 connecting pins or contact areas and bearing:
- an identification marking consisting of or including one of the following combinations of figures or figures and letters:
ICX 018 ICX 021
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 20 10
32-bit microprocessor in C-MOS technology, consisting of a single substrate layer on which are mounted two chips, comprising a central processing unit (CPU) and a memory unit, in the form of a hybrid integrated circuit, contained in a housing the exterior dimensions of which do not exceed 33×76 mm, with not more than 60 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures:
57-00000
57-19400
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 20 50
Amplifier for the frequency range 20 to 20 000 Hz, in the form of a hybrid integrated circuit, contained in a housing the exterior dimensions of which do not exceed 45×80 mm, with not more than 30 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
STK 4041
STK 4151
STK 4201
or
- other identification markings relating to devices complying with the abovementioned description
0
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 20 50
Amplifier with an isolation tension of not less than 750 V in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 16×52 mm, with not more than 40 connecting pins and a leakage of not more than 1 mA and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
ISO 100 ISO 102 ISO 106 ISO 120 ISO 121
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 20 90
16-bit digital-to-analog converter, in the form of a hybrid integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 28 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
DAC 705
DAC 706
DAC 707
DAC 708
DAC 709
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 20 90
Video digital-to-analog converter (VDAC) with a maximum conversion time of 10 ns, in the form of a hybrid integrated circuit, contained in a housing the exterior dimensions of which do not exceed 20 × 35 mm, with not more than 24 connecting pins and bearing:
- an identification marking consisting of or including one of the following combinations of figures and letters:
VDAC 0405 H
VDAC 0605 H
VDAC 0805 H
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 20 90
Four-channel digital-to-analog converter, each channel having a capacity of 12 bits, in the form of a hybrid integrated circuit, contained in a housing the external dimensions of which do not exceed 41 × 21 mm, with not more than 28 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
AD 390
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 20 90
Circuit for the demodulation of signals and noise-reduction, in the form of a hybrid integrated circuit, contained in a housing the exterior dimensions of which do not exceed 8×44 mm, with not more than 21 connecting pins and bearing:
- an identification marking consisting of or including the following combination of figures and letters:
STK 3400
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8542 20 90
Subscriber-connection units (crosspoint switch) with not less than four and not more than 12 switches and an operating voltage of at least 150 V, in the form of a hybrid integrated circuit, contained in a housing the dimensions of which do not exceed 92 × 41 mm, with not more than 94 connecting pins and bearing:
CN code
Description
Rate of
autonomous
duty
(%)
ex 8542 20 90
(cont'd)
- an identification marking consisting of or including one of the following combinations of figures:
904
719
or
- other identification markings relating to devices complying with the abovementioned description
0
ex 8543 80 90
Electromagnetic displays consisting of seven electromagnetic coils, which by means of the residual magnetism in the stators provide indefinite memory, and seven pivoting light-reflecting segments each of which is attached to a bar magnet. The display is contained in a housing the exterior dimensions of which do not exceed 28×36×50 mm
0
ex 8543 80 90
Modulators for the range from 0,5 to 5 MHz, contained in a housing the external dimensions of which do not exceed 74×48 mm
0
ex 8544 19 90
Insulated winding wire of aluminium of a purity of not less than 99,5 % by weight, neither laquered, varnished nor enamelled, with a total enamelled, with a total thickness of not less than 0,15 mm and not more than 0,16 mm
0
ex 9001 10 10
ex 9001 10 90
Image reverser made up from an assembly of optical fibres
0
ex 9001 20 00
Material consisting of a polarizing film, supported on one or both sides by transparent material
0
ex 9001 90 90
Octagonal Fresnel lens of acrylic resin unmounted, for the manufacture of overhead projectors (a)
0
ex 9002 11 00
Adjustable lens unit, having a focal length of between 115 and 140 mm, a diameter of not less than 120 mm and not more than 130 mm, and comprising a combination of between four and eight glass or methacrylic lenses, each lens coated on at least one side with a magnesium fluoride layer, for use in the manufacture of video projectors (a)
0
ex 9001 90 91
Optical element comprising an octagonal Fresnel lens, for the manufacture of overhead projectors (a)
0
ex 9013 80 00
Liquid crystal devices (LCDs) consisting of a layer of liquid crystals between two glass sheets or plates, with a minimum of seven and a maximum of 120 figures or letters, whose exterior dimensions are:
- 52×22 mm, or
- 67×27 mm, or
- 63×22 mm, or
- 18,5×52 mm, or
- 18,5×61 mm, or
- 73,7×55,8 mm,
with not more than 192 connecting pins or contact areas, for use in the manufacture of calculators (a)
0
ex 9021 30 90
Heart valves and parts thereof
0
ex 9021 30 90
Vascular protheses, neither woven nor knitted, of which the largest opening has an internal diameter not exceeding 8 mm
0
ex 9021 90 10
Receivers for hearing aids, contained in a housing the external dimensions of which excluding connecting points do not exceed 5×6×8 mm
0
ex 9110 12 00
Assembly consisting of a printed circuit on which are mounted one quartz oscillator, at least one watch circuit and at least one capacitor, of a thickness not exceeding 5 mm for the manufacture of products falling within Chapter 91 (a)
0
ex 9110 90 00
ex 9114 90 00
Assembly consisting of a printed circuit on which is mounted a watch circuit or a watch circuit and a quartz oscillator, with a thickness not exceeding 5 mm, for the manufacture of products falling within Chapter 91 (a)
0
ex 9608 91 00
Non-fibrous plastic pen-tips with an internal channel
0
ex 9613 90 00
Piezo-electric ignition mechanism
0
(a) Control of the use for this special purpose shall be carried out pursuant to the relevant Community provisions.